How to Build a Log Bed

A log bed is a bed frame built entirely from logs that are cut and shaped to fit together without nails or screws. Early log beds were made with crossrails and topped with a mattress. Modern log beds hold a box spring as well as a mattress, and so have no need for crossrails.

Method 1

Method 1 of 2:

Preparing the Logs

Download Article

1
Choose which logs you will use.
- The best choice is a log from a fire-killed standing dead tree. A wildfire burns diseased trees to the ground, but leaves healthy trees dead but still standing. Therefore, your chances of getting good logs are best from these trees. Fire-killed wood also loses its bark, saving you time when you start building.^{[1]XResearch source}
- You can find fallen logs or logs that wash onto a beach or riverbank. You can also buy logs from a sawmill. However, you may find after you start working that these are rotten or have other problems that make them unsuitable.
- Cut live trees down to get logs if it's legal to do so. You will have to wait about a year for the wood to dry enough to build with it. Stripping the bark will help it dry faster.
2
Saw the logs to the lengths you need for bed.
- Saw 2 4-foot (1.2 m) posts and 2 3-foot (90 cm) posts to make the legs and the ends of the headboard and footboard. The posts should be cut from large, sturdy logs.
- Saw 4 rails to separate the posts. Measure the mattress width and cut the rails to be 1 inch (2 to 3 cm) longer. When you cut the tenons to fit the rails into the posts, they will be the width of the mattress.
- Cut spindles to place between the rails of the headboard and footboard. You need 36-inch (90 cm) spindles for the headboard and 24-inch (61 cm) spindles for the footboard. After cutting the tenons, they will measure 1 inch (2.5 cm) shorter. The number of spindles you need depends on the size of the bed.
- Prepare 4 bed rails to connect the headpost to the foot post on each side. Measure the mattress length and cut the bed rails so they're 1 inch (2 to 3 cm) longer.
Advertisement
These are blades with 2 handles that you set against the wood and pull toward you. A curved drawknife removes bark and a straight drawknife shapes the log.^{[2]XResearch source}
You can do this with a drawknife, but it's easier to do with a tenon maker, which attaches to a drill and operates like a giant pencil sharpener.
5
Carve out mortises with a drill and Forstner bits. Frostner bits drill flat-bottomed holes large enough to hold tenons.^{[3]XResearch source}
- Mortises for the headboard should be cut at 9 inches (23 cm) and 44 inches (1.1 m) from the floor. For the footboard, the mortises are cut at 9 inches (23 cm) and 32 inches (80 cm).
- Spindle mortises are cut so the spindles will be evenly spaced.
- Mortises for the bottom bed rail are drilled at 5 inches (13 cm) above the floor in all 4 posts. The mortises for the top bed rail are drilled at 13 inches (33 cm) from the floor.

Method 2

Method 2 of 2:

Assembling the bed

Download Article

Place the eye hooks so you can stretch a cable between the right headpost and left footpost and the left headpost and right footpost.^{[4]XResearch source}
Use turnbuckles in the centers to tighten the cables and hold the bed together. Adjust as necessary to make sure the bed is square.
^{[5]XResearch source}

Video

Community Q&A

Search

Add New Question

Question
How do you fix a long cracs on a bed post?
Community Answer
Long answer short: you can't. However, you can use wood filler, then sand and wax. It will never look the same but it will add character.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 4
Question
How round do the cedar logs need to be for the bed post and the railing?
Community Answer
You could do this same build with square posts and it would be okay. However, if the logs are a lot bigger at one end than the other, you might have to change the length of a higher or lower railing to make it fit together correctly.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 3

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

You can buy a log bed kit that has logs that are already cut for the size of your bed, drilled and tenoned so you only have to assemble the bed.
Thanks
Helpful36 Not Helpful18
Don't worry if there are cracks in the logs. This is a natural feature of dry wood. If you turn the logs so as to avoid drilling mortises into the cracks, the logs will be just as strong as those without cracks.
Thanks
Helpful23 Not Helpful14
Consider using logs that have knots, aren't quite straight of have other unique characteristics.
Thanks
Helpful26 Not Helpful18