Download ArticleDownload ArticleX
How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 14 people, some anonymous, worked to edit and improve it over time.
There are 7 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 222,451 times.
Learn more...
Plantation shutters are simple indoor shutters that block sunlight and provide a decorative touch to windows. Composed of several horizontal slats, or 'louvers,' a central 'tilt bar' that controls the movement of the louvers, two vertical stiles and two horizontal rails. Plantation shutters vary in size, shape and functionality. The steps below will teach you how to build plantation shutters by installing simple flat louvers within a shutter panel to be mounted onto a window frame.
Steps
Download Article
Measure your window frame.[1]- Begin with the four planks that will serve as the shutter frame. Your shutter frame should be about .25 inches (or .6 cm) narrower than the window frame.
Cut the four planks to size.Advertisement
Build the shutter frame by gluing the two vertical planks to the two horizontal planks.
Measure the length of your flat louvers. The length of the louvers should be 1/16th inch narrower than the opening between the two vertical stiles. The nylon louver pins that support the louvers inside the frame have a washer that is molded into the pin and is 1/32 inch in thickness. These washers prevent the lovers from contacting the inside edges of the stile resulting in smooth action. How many louvers you use depends on the size of the louvers and panel height.
Ideally, you should buy louvers already fitted to size. If starting from scratch, remember to leave room to securely attach pins with glue at either end of the louvers. Flat louvers are typically 2.5 3.5 or 4.5 inches in width.
Cut your louvers to size.
Mark along the inside face of the vertical stile on the shutter frame the spots where the louvers will go in. The louvers should overlap by 1/4 inch. Take great care to line up the markings on either side of the frame so that the louvers will sit flat.
Drill holes for the pins of the louvers on these markings.[2]
Insert the louvers by placing the pins into the holes in the shutter frame. If you're having trouble getting the louvers in, drill the holes a bit deeper.[3]
Measure and cut the tilt bar to stretch from the top horizontal plank to the bottom horizontal plank of the shutter frame. A wooden dowel that can swivel easily is ideal.
Drill holes in the top and bottom horizontal planks to accommodate the tilt bar.
Insert the tilt bar into the holes.
Secure the tilt bar to the louvers by shutter staples or threaded eyelets.[4]
Test the shutters by moving the tilt bar up and down and observing the movement of the louvers.
Mount the shutter frame onto the window frame and secure it by screws or another method.[5]
Advertisement
Community Q&A
Search
- QuestionWhere can I find shutter molding to make plantation shutters?
Community AnswerThe type you can get depends on where you live. Larger cities will have more options for you. Home stores, specialty lumber yards, and even your local lumber yard will have what you want or will be able to order it for you.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
SubmitAdvertisement
Video
Tips
- If making shutters for a larger window or a series of windows, use several panels of shutters. Follow the instructions above for each panel and attach the panels by gluing or screwing their frames together.Thanks
- Indoor shutters look much nicer when stained or painted. You can paint the individual louvers after Step 6 or stain the whole shutter frame after Step 14.Thanks
- Many people prefer elliptical or tapered louvers to flat louvers. These louvers function the same as flat louvers. Fabricating elliptical louvers will require a moulding machine and moulding knives ground to profile.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Accurate measurements are essential to well-functioning shutters, especially at Step 7. Re-check your measurements after installing a louver or two and make sure they overlap as you want.Thanks
Advertisement
Things You'll Need
- Wood louvers
- Nylon louver pins or small wood dowels
- Two wood Rails
- Two wood Stiles
- Wood dowels or screws
- Tape measure
- Saw
- Drill
- Shutter staples or threaded eyelets
- Shutter Hinges
References
- ↑ https://extremehowto.com/how-to-measure-for-window-replacement/
- ↑ https://www.youtube.com/watch?v=7bgpMxz-uv0
- ↑ https://providenthomedesign.com/2014/10/30/diy-plantation-shutters/
- ↑ https://www.homeconstructionimprovement.com/how-to-build-custom-wood-plantation-shutters-blinds/
- ↑ https://www.youtube.com/watch?v=lR_A5a7Ay7c
- http://www.allaboutshutters.com/how-to-make-shutters.htm
- https://woodgears.ca/pantorouter/louver.html
About This Article
Thanks to all authors for creating a page that has been read 222,451 times.
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
Advertisement
