How to Apply Window Decals

Decals are fun ways to advertise or express yourself. You may want to put a decal on your car window or in the window of your store. There are 2 different kinds of decals: adhesive and static cling. To apply adhesive decals, clean the area properly, remove the protective cover, position the decal, and use a hard plastic object like a credit card to apply it and remove bubbles. For static cling decals, use a wet solution to apply large decals and the dry method for small decals.

Method 1

Method 1 of 4:

Finding a Place for the Decal

Download Article

1
Determine if the conditions are right. You should only apply decals when the weather is mild. Don’t try to apply decals when it is extremely cold or hot. Temperatures between 50–70 °F (10–21 °C) are ideal.^{[1]XResearch source}
- If you are placing decals outdoors, make sure it is not raining or windy. Aim to apply the decals when there is ample natural light, as it can be hard to tell if the glass is clean when it’s dark.
2
Clean the window glass. Before you apply a decal, clean the area where you will put the decal. Clean the area only with either rubbing alcohol or soap and water. Don’t use a window cleaning product on the window because the residue it leaves will prevent the decal from sticking.^{[2]XResearch source}
- Let the glass air dry after cleaning it. Avoid wiping the window with a cloth or paper towel, as this can leave behind particles that could get trapped underneath the decal.
Advertisement
3
Remove air bubbles from the decal. Prepare the decal before you place it on your window. Use something with a thin edge, like a credit card. Take the credit card or other object and rub it along the side of the decal with the clear tape from one edge to the opposite edge. The goal of this process is to remove any air bubbles.^{[3]XResearch source}
- Make sure to use enough pressure to smooth out the air bubbles.
4
Measure the area if you have a large decal. Large decals are much more difficult to place on windows than smaller ones. With larger decals, measure the decal and the window area where you wish to place it. Make sure the decal will fit.^{[4]XResearch source}
- If the decal will fit, use a piece of tape to hold the decal in place.

Method 2

Method 2 of 4:

Using the Peel and Stick Method for Small Decals

Download Article

1
Remove the white paper backing. Take the decal and slowly remove the white paper back from the sticker and clear plastic transfer tape. The white paper should come off without any sticking.
- If the white paper sticks to the sticker decal, replace the white paper carefully. Use the credit card again to remove any air bubbles.
2
Position the decal. Position the decal exactly how you want it on the window. If there is a specific place you want the decal, you may want to mark the top edge or middle with tape before trying to place it. That will help you get the right spot.^{[5]XResearch source}
- Slowly and carefully place the decal on the window. Use the credit card or other object to rub over the transfer tape to securely adhere the decal to the window. Begin in 1 corner and slowly work your way across the entire decal with the credit card.
Leave the decal on the window with the transfer tape still attached for around 24 hours. This helps ensure that the decal sticks fully to the window. If you don't let the decal set, it may not adhere to the window as strongly.
4
Remove the transfer tape. Carefully lift up 1 corner of the clear transfer tape. Slowly remove the tape, making sure to peel it at an angle from the corner. Use gentle pressure so you don’t remove the decal.
- If you remove the decal, reapply it to the window.

Method 3

Method 3 of 4:

Applying a Large Decal

Download Article

Place the decal where you want it on the clean window. Use 3 pieces of tape to hold the decal in place. Place 1 piece on the bottom, 1 on the top, and 1 on a side. Leave the other side empty.
2
Cut away the white paper on one side. On the side with no tape, carefully take the transfer tape and peel it back. You should stop when you get to the tape in the middle of the bottom and top sides. Use a pair of scissors to cut away the white paper where you peeled the decal.
- You should be cutting away about 1/3 of the backing paper.
3
Apply the free part of the decal. With the white paper backing gone, move the part of the decal back over to the window where it originally started. This part of the decal will adhere to the window where you cut away the white paper.^{[6]XResearch source}
- Use a credit card, or a large piece of hard plastic like a thin cutting board, to squeegee the decal to remove all air bubbles.
Now that part of the decal is stuck to the window, get rid of the three pieces of tape. Lift the free edge and slowly remove the white paper backing.
5
Stick the rest of the decal a small section at a time. All of the decal should be ready to stick to the window. Carefully place the transfer tape and decals onto the window. Stick the decal a small section at a time. Use a credit card to push the decal and transfer tape against the window. Start where the part of the decal is already on the window and use the credit card to stick the decal.
- Use the credit card to rub the decal slowly onto the window. Don’t try to stick the rest of the decal onto the window at the same time. Go from the middle outwards.
6
Remove the transfer tape. After the decal is securely on the window, lift up 1 edge of the transfer tape. Slowly remove the transfer tape at an angle. Use only light pressure so you don’t rip off the decal.
- You may want to wait at least 24 hours to make sure the decal has adhered to the window.

Method 4

Method 4 of 4:

Applying a Static Cling Decal

Download Article

Static clings are made from plasticized vinyl that will stick to smooth surfaces without sticky adhesives. They won’t leave a residue when they are removed. This type of decal will stick to glass or plastic.
2
Clean the area. Before applying the cling, you need to clean the area of the window where you want to place it. Use window cleaner with ammonia on windows before using a static cling.
- After cleaning it, let the area air dry or use a rubber squeegee to remove excess moisture. A static cling won’t stick to a wet or damp surface. However, avoid wiping the area dry with a paper towel or cloth, as this can leave behind particles or fuzz that could create bumps under the decal.
The dry method can be used for small decals that are smaller than 12 inches (30 cm). Place the decal where you want it on the window. Using a rubber roller, push out the trapped air. Start in the center and work outwards.
4
Apply large decals with the wet method. Large decals that are over 12 inches (30 cm) stick better if you use a solution to help them stick. Mix 2 teaspoons (9.9 mL) of liquid household detergent with 1 gallon (3.8 L) of cold water. Cover the side of the decal that you will stick to the window with the solution.^{[7]XResearch source}
- You can pour the solution on the decal or use a spray bottle.
5
Place the decal on the window. Press the decal against the window. When you have the decal where you want it, press the water out from under the decal. Use a squeegee or a rubber roller. Start in the center and press outwards. Push down the edges to make sure it sticks to the window.^{[8]XResearch source}
- Wipe away moisture with paper towels.