下载PDF文件下载PDF文件
X
How.com.vn是一个“多人协作写作系统”,因此我们的很多文章都是由多位作者共同创作的。 为了创作这篇文章,20位用户(部分匿名)多次对文章进行了编辑和改进。
这篇文章已经被读过13,726次。
本文将向你展示如何折纸蝴蝶。
步骤
- 拿出一张正方形的纸,有颜色的一面朝下放置。将它对折再展开。
- 沿另一个方向对折,再展开。
- 沿两个对角线对折,再展开。
- 将这个正方形纸放在你的面前,从你的角度看上去它不是菱形而是正方形。然后将两边向里折叠,使得两边折在中心线折痕上。
- 此时将折纸模型的短边放置在你的水平位置(如图所示)。注意左上角和右上角对角线的折痕,然后捏起折纸模型的上半部分,同时用另一只手压住纸张的另一端。
- 在上一步中已拿起上半部分,接下来用两指将上半部分撑开并向下折叠,使其折在纸张的中间折痕的位置。
- 翻转折纸,并将另一边也按照第五步和第六步折叠。
- 将折纸的上半部分向下对折。
- 现在你手中的纸张已折成一个梯形的模型,倒放整个梯形,将其长边保持在上方。然后将右上方的角向下折叠。
- 将左半边也重复上步操作。
- 检查下上步折下来的部分,然后将这两部分的外侧部分向内折。此步骤并没有折痕可以辅助比对位置,你只要保证两边这起的部分大小相当即可。
- 再沿中线折叠纸张。
- 用一只手捏住纸蝴蝶模型中央部分的一厘米(半英寸)位置或如图所示捏住一小段纸张。同时用另一只手将纸蝴蝶翅膀部分的纸向后压平。轻折手指部分的折纸以产生轻轻的折痕,这将是纸蝴蝶的身体。
- 你的纸蝴蝶就大功告成了!广告
你需要准备
- 折纸所用的纸张
这篇文章对你有帮助吗?
⚠️ Disclaimer:
Content from Wiki How 中文 language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
广告