Download ArticleDownload Article

This How.com.vn will teach you how to put together or fix a UK three-pin plug.

  1. How.com.vn English: Step 1 Strip the end of the thick cable coming from the appliance into the plug, using wire strippers.
    Take off roughly 3 centimeter (1.2 in) of white covering, leaving you with three thinner cables.[1]
  2. How.com.vn English: Step 2 Undo the Philips screw in the center of the plug, on the side with the three pins poking out.
    Advertisement
  3. How.com.vn English: Step 3 Take the back off of the plug (the part you loosened by undoing the screw).
  4. How.com.vn English: Step 4 Leaving the plug...
    Leaving the plug on a desk/table/floor, take the stripped end of the thick white wire and separate the three wires inside it from each other, so each one is relatively maneuverable.
  5. How.com.vn English: Step 5 Strip roughly 0.5...
    Strip roughly 0.5 to 1 centimeter (0.2 to 0.4 in) off of the end of the blue, brown and striped wires, so that the copper insides are clearly visible.
  6. How.com.vn English: Step 6 See the diagram below, in the External Links section for a clearer view.
  7. How.com.vn English: Step 7 Put all three...
    Put all three wires through the cable grip, along with the thick white cable, until the cable grip can be securely tightened onto the thick white cable. The cable grip may have to be loosened with a Philips screwdriver in order to fit the cable underneath it.[2]
  8. How.com.vn English: Step 8 Undo the screws on top of the holes to allow the wires to go into the holes and get a good contact with the metal.
  9. How.com.vn English: Step 9 The Blue (Neutral)...
    The Blue (Neutral) wire (bl = bottom left) goes into the hole in the bottom left (when the three pins of the front of the plug are facing away from you).[3]
  10. How.com.vn English: Step 10 The Brown (Live)...
    The Brown (Live) wire (br = bottom right) goes into the hole on the right, connected to the fuse (which should be clipped in).[4]
  11. How.com.vn English: Step 11 The green and yellow wire is the earth wire, and goes through the middle up to the hole in the top.
  12. How.com.vn English: Step 12 Put the back of the plug back on once all the wires are in and tight, and all the screws are securely done up.
  13. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How would I wire a brown and blue cable?
    How.com.vn English: Community Answer
    Community Answer
    Blue to the left and brown to the right, as shownabove. It's a standard cable for a device which doesn't need an earth wire.
  • Question
    If the wires are black and red, which is Live and which is Neutral?
    How.com.vn English: Community Answer
    Community Answer
    Red will be Live and Black will be Neutral.
  • Question
    The cable for my hob has four wires: green/yellow, blue, black and brown, whilst the plug only takes three. Can I use either the brown or black?
    How.com.vn English: Community Answer
    Community Answer
    No! Usually a brown wire is live and black or blue wires are neutral, so they are NOT interchangeable. I haven't seen such a connection in my hobs, so I would recommend that you contact the supplier, manufacturer, or a professional electrician.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You will have to take out the fuse to put the wires in place inside the plug. Make sure you put it back in afterwards or the plug won't work as there will not be a complete circuit without the fuse.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • This can go quite wrong if wired incorrectly, and death/serious injury can occur.
      • If unsure, it may be a good idea to have an electrician check things over/do the whole job himself, as getting this wrong can be very dangerous.
      Advertisement

      Things You'll Need

      • Wire strippers
      • A thin Flathead screwdriver
      • A small Philips screwdriver
      • Good hands

      About This Article

      How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 32 people, some anonymous, worked to edit and improve it over time. This article has been viewed 338,617 times.
      How helpful is this?
      Co-authors: 32
      Updated: February 3, 2024
      Views: 338,617
      Thanks to all authors for creating a page that has been read 338,617 times.

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement