How to Weld

Welding is the process of using electrical current to superheat and melt metal so that you can join two pieces of metal together. There are several ways to weld, but the two most popular ways to weld at home include gas metal arc welding, or MIG welding, and arc welding, otherwise known as stick welding. While welding can seem intimidating at first, it's actually fairly simple once you take the proper safety precautions and practice using your welding machine.

Method 1

Method 1 of 4:

Staying Safe

Download Article

The sparks and light that welding gives off is extremely bright and can harm your eyes. There’s also the possibility of metal debris or sparks flying into your face. Purchase an auto-darkening welding helmet online or at a hardware store to protect your eyes and face from the sparks and heat generated from the welding machine.^{[1]XResearch source}
Purchase welding gloves online or at a hardware store. Welding gloves are typically made of cow or pig hide and will protect your hands from electrical shock, heat, and radiation. Always wear gloves when welding something.^{[2]XResearch source}
Advertisement
An apron will prevent sparks from the welding machine from making contact with your clothes or potentially burning you. Get a durable, non-flammable apron online or at a hardware store.
4
Work in a well-ventilated area. The process of welding contaminates the air with vapors and gases that are hazardous to inhale. You’ll want to work in an open space with open windows or doors while you weld.^{[3]XResearch source}
- Never weld galvanized steel as it produces dangerous gas.
5
Inspect your welder before beginning. Look at all the wires, hoses, and connections on your welder. Replace any damaged or worn components before using the welder.
- Some welders require calibration at regular intervals. Always be sure that the calibration is up to date; there is no grace period.

Method 2

Method 2 of 4:

Preparing the Metal for Welding

Download Article

1
Scrape any paint and rust off the metal before welding. Use 80-grit sandpaper, a wire brush, or an angle grinder with a flap disc and go over the surface of the painted metal. You can purchase the sandpaper or wire brush or rent an angle grinder at a hardware store or online. Continue to grind off the paint and rust until your metal is metallic and shiny looking.^{[4]XResearch source}
- If you’re using an angle grinder, be careful not to distort thin metal.
- If you’re working with thick metal, bevel the edges with an angle grinder to ensure the weld can fully penetrate.
- Paint and rust will inhibit the electrical connection created by the welder, and can also cause the weld to have porosity in it, which is unwanted
Your metal must also be free of any dust, dirt, or debris because they can inhibit your ability to make good welds. Saturate a cloth in acetone and wipe it over the entire surface of the metal. The acetone should remove any contaminants that could mess with your ability to weld.^{[5]XResearch source}
Rub over the surface of the metal, making sure to remove any of the acetone that was left over from washing it. Let the metal fully dry before you start to weld.

Method 3

Method 3 of 4:

Using an MIG Welder

Download Article

Make sure that your MIG welder has a wire on the spool. Look at the tip of the welding gun to make sure that it’s being properly fed up into the gun. Ensure that your shielding gas canisters are properly set up and that your welding machine is in proper working order.^{[6]XResearch source}
Your MIG welder should have a grounding clamp that you need to clamp onto your table. This will prevent you from getting electrocuted if you end up touching your table.^{[7]XResearch source}
3
Hold the welding gun with both hands. Rest one hand on the table that you’re welding on and use it to control the direction of the gun while you weld. Your other hand should be gripping the gun, with your index finger ready to press the trigger.^{[8]XResearch source}
- Remember to wear gloves when handling the welding machine.
Positioning the gun on a 20-degree angle against the piece of metal will help you penetrate into the metal as you weld. This is also commonly referred to as a push position.^{[9]XResearch source}
Put your welding helmet down over your face and press the trigger on the gun. This should create a bright spark the end of your welding gun. Keep your face away from the weld so you don’t injure yourself or inhale any toxic fumes.
Press the tip of the welding gun against the piece of metal. Sparks should start to be created by the welding gun. Leave the gun in a single spot for one or two seconds before you start moving it down your piece of metal.^{[10]XResearch source}
Take safety measures before welding. "I used to think basic eye protection would be fine for my garage welding projects. After getting sparks in my eyes one too many times, I finally got serious about the safety gear. Following the article's advice on helmets, gloves, and ventilation made all the difference." - Akpobari Kiasira D.
Practice to make perfect welds. "As a beginner welder, I struggled with technique and getting nice, smooth welds. Practicing on scrap metal, like the article suggests, built my skills. Now, my beads look professional." - McKenna K.
Get the metal prep right. "I could never understand why my amateur welds kept turning out porous or not adhering fully. This article explained the importance of completely removing paint, oil, and rust from the surface first. Proper metal prep makes all the difference for penetration and strength." - Edward H.
Master moving the gun at a steady pace. "When I first started MIG welding, I swept the gun too fast over the joint and ended up with thin, weak welds. It took patience and practice moving the gun tip slowly and steadily, as described, to lay down nice, even beads." - Ken C.
We want to hear from you! Advice from our readers makes our articles better. If you have a story you’d like to share, tell us here.
7
Make tiny circles with your gun as you weld. Work your way down the metal, making tiny circles as you move the welding gun. As you move down your piece of metal, you'll start to see hot metal start to pool behind the tip of your welding gun. Once you’ve reached the end of your weld, let go of the trigger and turn off your welding machine.
- If you move the weld gun too slowly, you may create holes in your sheet of metal.
- If you move your weld gun too fast, you may not heat the metal hot enough to melt it and your weld will be very thin.

Method 4

Method 4 of 4:

Using a Stick Welder

Download Article

1
Set the welding machine to DC positive. The polarity on your machine will determine if you’re welding with an alternating current (AC) or direct current (DC). The DC setting on your machine will have DC negative and DC positive. DC positive provides a large amount of penetration and is the setting that you should use if you're just starting out.^{[11]XResearch source}
- The AC setting is used when your power supply only has an AC output.
- DC negative results in less penetration and should be used on thin sheets of metal.
2
Set the amperage on your stick welder. Take a look at the instructions or packaging of the “rod” or electrode that you plan on using for welding. They will have a recommended amperage on them depending on what material they are made of. Use the knob on your welding machine to set the machine to the amperage that it recommends on the electrode’s packaging.
- If the rods provide an amperage range, split the difference. For instance, if the range is 100 to 150, use 125.
- The most common electrodes for steel include the 6010, 6011 and 6013.
Clean the surface first to ensure there will be a strong connection. Then, take your grounding clamp and apply it to the table that you're working on. This will prevent you from getting electrocuted while you weld.
Some stick welders will have a clamp for their welding gun while others will have a more traditional looking welding gun. Place your rod into the tip of the welding gun and tighten the tip so that the rod stays in the gun. If you have clamps, put the welding rod in between the clamps and close them.^{[12]XResearch source}
Holding the gun with two hands will improve your precision and will help you weld straighter lines. Wrap your dominant hand over the top of the welding gun and use your other hand to support the welding gun from below.^{[13]XResearch source}
Tap the tip of the rod lightly onto the metal and sparks should start to form. The rod will act a lot like a match, and friction must be present before you can strike an arc. Once you see and hear sparks, you’ve successfully started your weld.
Slowly move down the sheet of metal with your rod. As you go along in a line, the melting metal should form a pool behind your rod. This will be the same size as the weld. A proper weld or "bead" will be about ¹⁄₂ inch (1.3 cm) thick.
If you lift the rod off of the metal, it will stop creating sparks. You can hold the rod onto a piece of metal for 1-2 seconds to quickly create a rounded tack weld. This is useful if you need to create quick welds on certain pieces of metal.^{[14]XResearch source}
9
Break the slag off with a hammer. After you create your weld, metal will form over the weld like a shell. This material is called slag and is incredibly hot. Lightly tap the slag with a hammer until it comes off in sheets.^{[15]XResearch source}
- Don’t slam the slag with a hammer, or hot pieces of metal can come flying off of your weld.
Use a wire brush and rub back and forth over the weld. Clean off the remaining slag and make sure there is no metal debris left on the weld.^{[16]XResearch source}

Expert Q&A

Search

Add New Question

Question
How do you protect yourself when welding?
Jones Welding & Industrial Supply Company
Industrial Welding Experts
Welding can be a complex and potentially hazardous activity. The information provided here is meant to serve as a general guideline, but it is crucial to prioritize safety and consult with a qualified welding specialist or instructor if you have any doubts or concerns. Welding techniques, materials, and equipment may vary, and the proper procedures and precautions may depend on specific circumstances. Welding involves inherent risks, such as exposure to high temperatures, intense light, fumes, and electrical hazards. Therefore, it is essential to receive proper training, follow manufacturer's guidelines, and adhere to safety regulations and practices. WikiHow and Jones Welding & Industrial Supply, Inc do not assume any responsibility or liability for any injuries, damages, or losses resulting from the use or misuse of the information provided. Always seek professional advice and take appropriate precautions to ensure your safety when engaging in welding activities. You can always consult with your local welding supply store to be led into the right direction!"
Jones Welding & Industrial Supply Company
Industrial Welding Experts
Expert Answer
Wear the appropriate protective gear, like a welding helmet with a properly shaded lens, flame-resistant clothing, welding gloves, and a welding apron. It's also important to work in a well-ventilated space, and to be always keep your workpiece grounded to protect yourself from electrical hazards.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 5
Question
How do I start up the electric welding machine and sort the settings?
Community Answer
The settings don't matter at the time you turn on the machine. Before you start to weld, the settings need to be set according to the thickness and type of metal you are welding.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 24 Helpful 81
Question
What should I do after each bead is completed?
Community Answer
This depends on whether it's practice or not. If it's practice, then dip it in water. If it isn't for practice but for making an item, etc., then let it air dry.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 15 Helpful 53

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Practice welding on scrap pieces of metal before tackling important projects. Keep practicing until you’ve perfected your technique.
Thanks
Helpful1 Not Helpful0
Your first weld won't be perfect. Don't get discouraged. Talk to your instructor or refer to a defect book to figure out what went wrong, and try again.
Thanks
Helpful1 Not Helpful0