Download ArticleDownload ArticleThis article was co-authored by Garrett Faust. Garrett Faust is a Designer & Fabricator of Custom Wood Wall Art & Signs. He is also the Co-Founder of Uptown Woodworks based in Minneapolis, Minnesota. With over seven years of professional experience, Garrett and co-founder, Harrison, specialize in creating custom wood wall art and signs. They use CNC lasers and routers to cut out or engrave detailed artwork. Garrett received his B.S. in Mechanical Engineering from the University of St. Thomas.
How.com.vn marks an article as reader-approved once it receives enough positive feedback. In this case, 100% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 114,503 times.
Veneering wood was once thought of as a painstaking and time-consuming task, but it has come a long way recently. There are now many varieties of veneer, with applications that have evolved for convenience. These days, just about anyone can learn how to veneer wood. And as you'll discover here, contact cement is considered one of the easiest and longest-lasting methods.
Steps
Choose a rotary vs sliced veneer. Rotary veneers are what plywood is made out of and generally produce an appearance that many people don't like. However, they can also come in larger sheets and may be the only option for very large projects. Sliced veneer looks like normal lumber, and allows you to get really beautiful grain detail.
Choose a random or book-matched veneer. You can get random sets of veneers, or you can get book-matched sets. In book matched sets, you get the pieces that were cut one next to the other, so that the grain patterns match up. This can be used to create beautiful designs. However, unmatched sets may look more "natural".Advertisement
Choose your application method. You can get veneer sheets that have adhesive already applied to one side. These are the easiest to place. If you get regular veneer, however, you'll need to use the application method discussed in the other section.- These are generally applied just like a sticker, but you should read the included instructions to see if that particular manufacturer requires special steps.
Choose your substrate. Veneers are attached to a substrate (or base material). Usually this is either another wood (if you are veneering, for example, panels on doors or cabinets) or it is a cheaper material altogether, such as MDF. These man-made materials are probably the best option, since they usually allow you to save the most money.
Choose a glue. You can use yellow or carpenter's glue if you want to. If you live in a very dry environment with little humidity, these will work perfectly fine. If you live in a humid environment, however, these glues can cause your veneers to wander. It's better to use a proper veneering glue.- Many other methods of veneering use these glues. Be wary of those methods, especially if you live in a humid environment.
Cut your veneer to size. Cut the veneer to the size you want, making sure to leave as little overhang as possible. Any more than 1/4" overhang and you'll likely crack the veneer.
Apply contact cement to the substrate. Using a very short nap roller, roll the contact cement onto the area of the substrate that will be covered by a single panel of the veneer. Roll in one direction and then the other, just like you would a wall, in order to guarantee 100% coverage of the substrate surface.
Apply contact cement to the veneer. Go through the same motions to apply contact cement to the veneer, also making sure to get 100% coverage. There should not be any dry spots.
Allow for tack time. Allow just enough time for the adhesive to dry slightly. It should feel perhaps somewhat tacky to the touch, but not be able to grab hold of a sheet of paper or the hairs of your arm. This is usually after 5-10 minutes.
Place a sheet of wax paper. Place a sheet of wax or parchment paper on your substrate. This will go between the substrate and the veneer while you align the veneer, to help you get it as straight as possible without joining the pieces before they're ready.
Align the veneer. Line up the corners of the veneer and the substrate and get it into place. Then start to press it down so that the two glued sides touch, removing the paper as you go.
Smooth out the piece. Using your hand, smooth out the piece of veneer, starting from the center and moving out toward the edges. Apply firm pressure to ensure that full contact is made. Next, smooth it again using a flat tool like a putty knife or a carpet stair tool. Smooth it in one direction and then the other, just like you applies the adhesive.- Do not use a tool like a roller, as this applies weak and uneven pressure.
Trim the edges. Trim the edges using a utility knife and then sand the edges using high grit sandpaper (180 to 220).
Expert Q&A
- QuestionWhat are some tips for beginners who want to start doing woodworking projects?
Garrett FaustGarrett Faust is a Designer & Fabricator of Custom Wood Wall Art & Signs. He is also the Co-Founder of Uptown Woodworks based in Minneapolis, Minnesota. With over seven years of professional experience, Garrett and co-founder, Harrison, specialize in creating custom wood wall art and signs. They use CNC lasers and routers to cut out or engrave detailed artwork. Garrett received his B.S. in Mechanical Engineering from the University of St. Thomas.
Designer & Fabricator of Custom Wood Wall Art & SignsOne tip I'd give is when you buy wood, take the time to look through the pile and pick the straightest planks you can find. This makes everything you do a lot easier down the line. Also, if you're buying wood from big box stores like Home Depot, you can actually return any unused or warped pieces which you usually can't do at a specialty lumberyard. - QuestionI don't understand how you remove the waxed paper?
Jack Pierce_26Community AnswerFor waxed paper, you will have to scratch it off. Or if there is a piece missing, scratch the veneer parts from there, since it is easy to do.
Video
Tips
- One method to verify the proper placement is to cut a piece of waxed paper the same size of the veneer, being sure to allow some excess on one side. Then put it between the substrate and the veneer. This will allow you to position both pieces, to your satisfaction before sliding the waxed paper out to activate the adhesive.Thanks
- You can eliminate any leftover bubbles by making tiny slits in the veneer, using a utility knife. Make the cuts in the direction of the grain.Thanks
Warnings
- When using contact cement, be absolutely sure about the placement of the veneer. Contact cement is impossible to adjust once it's made contact with the surface.Thanks
Expert Interview
Thanks for reading our article! If you’d like to learn more about woodworking, check out our in-depth interview with Garrett Faust.
References
About This Article
To veneer wood, start by cutting the veneer to size leaving as little overhang as possible. Next, roll contact cement on both the substrate's surface and the veneer with a short nap roller and wait about 5-10 minutes until the adhesive feels tacky to the touch. Then, position the veneer on top of the substrate, lining them up perfectly, and press down gently. Finally, smooth out the piece of veneer with your hand, trim the edges with a utility knife, and sand the edges using high-grit sandpaper! For tips on using wax paper to help you perfectly align the veneer and substrate, read on!
Reader Success Stories
"I was looking for easy-to-read, practical, and clear instructions for applying veneer without having to watch a video. I prefer to have a printout of the steps. "..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
