How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 18 people, some anonymous, worked to edit and improve it over time.
This article has been viewed 211,824 times.
Learn more...
After going to the effort of making jelly, especially jelly made into a clever shape, it can be helpful to know how to unmold it successfully. The base of the jelly mould forms a vacuum and it this vacuum that must be broken in order to remove the jelly successfully. This article provides two very simple and effective methods.
Steps
- Fill a bowl with hot water.
- Dip the jelly mould into the hot water three times.[3]
- Place on a firm bench. Press the jelly around the edge, using your finger. Gently pull away from the edge around the whole jelly.
- Turn the jelly mould onto a plate. Place your hands over both the base of the plate and the base of the mould. Shake quickly and sharply and the jelly should release.[4]
- Finished.
Community Q&A
- QuestionWill this work with a large mold (bundt-cake size)?QamarTop AnswererYes - just do it carefully and gently.
- QuestionWill this work for small silicone moulds?Community AnswerIf the mould is silicone, just run a butter knife around the inside edge and turn the mould inside out.
- QuestionWill it work with a glass container?Abigail HeinzCommunity AnswerYes, this should work using a glass container.
Tips
- Jelly is the British/Australian/NZ term. It is more commonly referred to as Jell-O in North America.Thanks
- If you are willing to prepare your jelly mould before adding the jelly mixture to set, you can use an alternative method. This method involves rinsing the mould in cold water and coating it with salad oil. After the jelly has set, it will not only unmould very easily but there will be a glossy look to your jelly.Thanks
- It can help to rinse a plate with cold water before adding the jelly. When you take the jelly out of the mold, you can tilt the plate to centre the jelly.Thanks
Things You'll Need
- Jelly in mould, set
- Bowl large enough to fit jelly mold
- Warm water
References
About This Article
If you’ve made a jelly but want to make sure it doesn’t break when you unmould it, break the vacuum with warm water. First, fill a bowl that’s larger than the jelly mould with warm water. Once you put the mould in the water, allow it to stand for a few seconds, then remove it. When you turn the jelly out, it should keep its shape perfectly. You can also fill a bowl with hot water and dip the jelly mould into it 3 times. Then, press the edges of the mould and gently pull the jelly away from it. Place your hands over the base of your plate and the base of the mould, shake quickly, and the jelly should release. To learn how to release your jelly with cold water, keep reading!
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.