How to Truss a Chicken

11 Recipe Ratings|Success Stories

Trussing a chicken, or tying string around its body before roasting it, helps the chicken cook evenly, prevents the wing tips and legs from burning during roasting or grilling, and gives the finished bird an attractive shape. Learn how to master this useful culinary skill in three different ways: by tying the legs first, tying the wings first, or using a shortcut.

Steps

1
Prepare your workspace. Since you'll be dealing with raw poultry, gather everything you need before you begin trussing the chicken. That way you won't have to worry about finding supplies after you've already touched it. You'll need the following equipment:
- A cutting board
- 3 feet (0.9 m) of kitchen twine or string
- A scissors
- A roasting pan
2
Prepare the chicken. Remove any giblets, organs or neck pieces from inside the chicken's cavity. These can be discarded or set aside for later use. Rinse the chicken's outer surface and inner cavity. Pat it dry with paper towels, inside and out, before you begin the trussing process.
- If you plan to stuff the chicken, go ahead and stuff it before you start the trussing process.
- Wait to season the chicken until after it has been trussed.
Advertisement

Method 1

Method 1 of 3:

Truss a Chicken Using a Shortcut

The legs should be pointing toward you.
Loop the twine around the crossed legs and tie it as tightly as possible, so the legs are snug against the chicken's breast.
Use the scissors to cut off the excess length of twine after you've made the knot to prevent the twine from burning during cooking.
Place the chicken in the roasting pan and tuck the wings behind the neck area of the chicken.
Advertisement

Method 2

Method 2 of 3:

Truss a Chicken by Tying the Legs First

Set the chicken on the cutting board so that the legs and wingtips are facing you and the breast side of the chicken is facing up.
Center the twine under the legs so that you have equal lengths of twine extending from either side.
Lift the ends of the twine so they are taut underneath the chicken's legs, then cross the ends over each other to form an "x" across the legs.
Pull the twine tight, so the ends of the legs are pulled close together.
Hold the ends together at the top of the chicken, near the neck. Pull the strings taught so they don't come loose.
6
Turn the chicken over. While keeping the twine tight, flip the chicken over so the legs are now facing away from you.
- This is the hardest step of trussing chicken, so don't get discouraged if it takes you more than one attempt.
- When the chicken is flipped, you should see the twine bends threaded over each thigh and under each wing.
7
Knot the twine. Position the twine under the neck bone of the chicken and tie it in a tight knot.
- If the chicken's neck bone has been cut off, just position the string near the neck opening.
- Make sure the string is very taught. The chicken's body should make a creaking sound as it tightens.
Use the scissors to cut off the excess length of twine after you've made the knot to prevent the twine from burning during cooking.
Place it in the roasting pan and tuck the wings behind the neck area of the chicken. Pull the skin over the breast meat as tightly as you can, and tuck it into the cavity. The chicken is now trussed and ready to cook.
Advertisement

Method 3

Method 3 of 3:

Truss a Chicken by Tying the Wings First

Center the twine at the front of the chicken so it aligns with the neck opening. If the neck bone is still there, tuck it under the neck to hold it in place.
The twine ends should go over the wings, holding them flat against the chicken's body, and into the crevices formed where the the thighs meet the breasts. Pull the ends taught on either side.
The twine ends should run through the cracks where the thighs meet the breast around to the ends of the breasts. Tie them together at the front of the breast, just above the back opening of the chicken.
Cross the legs tightly against the chicken's breast. Loop the strings around the ends of the legs once more and tie a tight knot.
Use the scissors to cut off the excess length of twine after you've made the knot to prevent the twine from burning during cooking.
Advertisement

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Warnings

Make sure you thoroughly wash your hands and any contact surfaces such as counter tops or cutting boards after handling raw poultry.
Thanks
Helpful3 Not Helpful3

Things You'll Need

Scissors
Kitchen twine (Note: use 100% cotton kitchen twine, also known as butcher's twine. Household string often contains polyester, not good next to food.)
Cutting board
Soap and water
Roasting pan