How to Tie a Swivel to Your Fishing Line

Download Article
Use these quick knots to attach a fishing swivel
Download Article

If you need to attach a swivel to fishing line, you can do so using your choice of a few different knots. You can tie a simple knot, an offshore swivel knot, or an improved clinch knot. Choose whichever you find the easiest, as all 3 should keep your line firmly attached to the swivel.

Things You Should Know

  • Make a loop at the end of the line that's about 4 inches (10 cm) long, then feed the loop through 1 hook of the swivel.
  • Wrap the loop back, around, and through itself to make a simple knot, but don't tighten it just yet.
  • Feed the swivel through the end of the loop, then pull it taught to tighten the knot.
Method 1
Method 1 of 3:

Making a Simple Knot

Download Article
  1. How.com.vn English: Step 1 Make a loop and thread it through the swivel.
    Fold the fishing line back over on itself about 4 inches (10 cm) from the end of the line to make a loop. Then, thread the loop through the swivel.[1]
  2. How.com.vn English: Step 2 Push the swivel through the loop when making a basic knot.
    Wrap the loop around the line and tuck it through the hole that is created, as if you were going to tie a basic knot. Before you pull it tight, push the swivel through the original loop you made.[2]
    Advertisement
  3. How.com.vn English: Step 3 Tighten the knot.
    After pushing the swivel through the loop, hold the swivel in 1 hand and the line in the other. Pull both ends firmly to tighten the knot.[3]
  4. How.com.vn English: Step 4 Trim the excess fishing line.
    Use scissors or a knife to trim the extra fishing line off. Be careful not to cut yourself![4]
  5. Advertisement
Method 2
Method 2 of 3:

Using an Offshore Swivel Knot

Download Article
  1. How.com.vn English: Step 1 Loop the line through the swivel and twist the line.
    Thread 1 end of the fishing line through the swivel, then thread that same end back through the swivel to create a loop. Twist the loop once right above the swivel.[5]
  2. How.com.vn English: Step 2 Fold the loop back over the line.
    Take the loop above the swivel and fold it back over the swivel so it overlaps the line. Put the fingers of 1 hand where the loop meets the line to hold it in place.[6]
  3. How.com.vn English: Step 3 Push the swivel through the opening 3 to 6 times.
    Rotate or spin the swivel through the opening of the loop and line 3 to 6 times. Ensure the swivel makes a full rotation each time to create coils in the line.[7]
  4. How.com.vn English: Step 4 Pull the line to create the knot.
    Hold the swivel in 1 hand and use the other hand to pull the line tight. This will cinch up the knot and secure the swivel to the line. There won’t be any excess that needs to be trimmed off.[8]
  5. Advertisement
Method 3
Method 3 of 3:

Tying the Improved Clinch Knot

Download Article
  1. How.com.vn English: Step 1 Thread the line through the swivel and double it back.
    Thread 1 end of the line through the eye of the swivel. Pull about 6 inches (15 cm) of line through the swivel then double it back against itself so it’s folded over the swivel.[9]
  2. How.com.vn English: Step 2 Twist the line 5 to 7 times and thread the end through the loop.
    Leave about 1 in (2.5 cm) of space between the swivel and the twists to create a loop. Twist the line 5 to 7 times, then bring the short end of the line through the loop just below the swivel.[10]
  3. How.com.vn English: Step 3 Pull the short end and main line to tighten the knot.
    It can be helpful to moisten the short line so you can grip it easily. Pull both the short end and the main line to tighten the knot against the swivel, but be careful that the coils don’t overlap. Trim off any excess line.[11]
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What's the best kind of knot to use to tie a swivel?
    How.com.vn English: Michael Reynolds
    Michael Reynolds
    Professional Fishing Instructor
    Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW).
    How.com.vn English: Michael Reynolds
    Professional Fishing Instructor
    Expert Answer
    The fastest, easiest, strongest knot is the Palomar knot, but you can also use the uni knot, the improved clinch knot, and the San Diego jam knot.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Fishing line
      • Swivel
      • Scissors or knife

      About This Article

      How.com.vn English: Michael Reynolds
      Co-authored by:
      Professional Fishing Instructor
      This article was co-authored by Michael Reynolds and by How.com.vn staff writer, Sophia Latorre. Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW). This article has been viewed 216,516 times.
      19 votes - 90%
      Co-authors: 6
      Updated: January 10, 2024
      Views: 216,516
      Categories: Knot Tying
      Article SummaryX

      To tie a swivel to your fishing line, try using an improved clinch knot. First, thread the line through the swivel and double it back. Then, twist the line 5 or 7 times and feed the end through the loop created by your twists. Finally, pull the short end and the main line to tighten your knot. To learn how to tie your swivel with a simple knot, read on!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 216,516 times.

      Reader Success Stories

      • How.com.vn English: Stephen Burton

        Stephen Burton

        Sep 11, 2021

        "Awesome easy, don't need to wear my glasses, so simple and effective."
      Share your story

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement