How to Tie River Tubes Together

Floating in a river is a fun summertime activity to do with friends. If you want to stick together with a group rather than floating freely or if you want to keep a cooler with drinks close by, you may want to tie your tubes together. Whether you use robe or plastic buckles, you can have a relaxing day on the water with your friends!

Method 1

Method 1 of 2:

Using Rope

Download Article

1
Purchase braided water-resistant rope. Determine how many tubes you need to connect together. Buy at least 3 to 4 feet (0.91 to 1.22 m) of rope for each tube you’re tied to. Use a rope no thicker than ¹⁄₂ inch (13 mm) in diameter since it will be more of a burden to tie.^{[1]XResearch source}
- Rolls of braided rope can be purchased at stores that specialize in outdoor goods.
- Braided rope is commonly used for anchor lines.
- Coordinate with the people you’re going with to see if they can also purchase rope as well.
If you have your tubes already, use a flexible tape measure to find out how much rope you need to tie them together. Account for about 4 inches (10 cm) of extra rope on each end so you can tie a knot. Use a pair of sharp scissors or utility knife to cut the rope.
Advertisement
3
Feed the rope through the hole in the middle of your tube. Hold one end of the rope securely in your hand and run the rope through the middle of your tube so it goes underwater. Reach around the outside of your tube with your other hand to grab the part of the rope that’s submerged.
- Work with a friend so they can help hold the tubes in place or grab the rope for you.
- If your tubes have handles, tie the ropes to them to use less material.
Take the submerged end of the rope and pull it through the hole in the other tube you want to be tied to. Bring the 2 ends of the rope together between the tubes and pull the rope tight.^{[2]XResearch source}
5
Tie an overhand knot to keep the rope secure. Form a loop with the end of the rope and then feed the tip through it. Pull the knot tight to keep the tubes secured. Make sure the tubes are not held loosely. If they are, undo the knot, and pull it tighter.^{[3]XResearch source}
- Tie a double knot for added security.
6
Tie your tube to any other tube. Depending on the size of your group, you may have 3 or 4 ropes tied around your river tube. Make sure each tube is secured to at least 1 other tube.^{[4]XResearch source}
- Make a cluster of tubes rather than a straight line. The current can differ in different parts of the river and could pull one of the tubes faster. It also makes it easier to talk and relax with your friends!
- If you have a larger group, split up into smaller groups of no more than 5 people. This helps make it easier if you have to navigate through shallow water or rapids.

Method 2

Method 2 of 2:

Connecting Tubes with Buckle Straps

Download Article

1
Purchase buckles with polypropylene webbing 3 to 4 ft (0.91 to 1.22 m) long. Look for buckles that have a male and female end, meaning an end with a buckle and an end that you slide the buckle into. Use a side release buckle for the easiest attachment and release.^{[5]XResearch source}
- Have at least 2 straps for each tube you’re connecting.
- Find plastic buckles with webbing at hardware stores or stores that specialize in outdoor goods.
- Polypropylene is durable and water-resistant, so it will be easy to handle.
2
Wrap one buckle around your tube and another around the second tube. Feed one of the ends of the buckles through the hole in the center of each tube. Make sure you feed the opposite into the water for each tube. For example, if you put the male end through one tube, feed the female end through the other so they’re able to clasp together.
- If your river tubes have handles, wrap the straps around them.
3
Attach the male end of one buckle to the female end of the other. Clip both of the buckles together so they’re secured. If the straps hold the tubes loosely, pull on the webbing attached to the male end of the buckle to tighten the connection.^{[6]XResearch source}
- Loose straps could be hazardous if you get tangled in them, so make sure you are connected tightly.
Make sure each tube is connected to at least 2 others so they do not float freely. Attach the tubes so they are in a cluster rather than a straight line so you can easily talk to your friends!^{[7]XResearch source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Many tube rentals will have buckle straps attached to them or have an option to add one to your package.
Thanks
Helpful0 Not Helpful0
If you’re bringing a tube for a cooler, tie the cooler in the middle of the group so everyone can easily access it while floating.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Make sure the ropes are secured tightly so you cannot get tangled in them. River currents vary and could drag you under the water.
Thanks
Helpful0 Not Helpful0