How to Thread a Needle

You want to thread a needle! It isn't hard, once you've gotten the hang of it, but it does require careful technique and a good deal of dexterity. Once you've gotten your hands on a needle and thread, read on to learn how to thread the needle!

Method 1

Method 1 of 3:

Preparing to Thread

Download Article

The length, color, and type of thread will depend on what you're sewing. Make sure that it's long enough for your purposes! In general, a thread about 18-24 inches in length should be plenty to begin with.^{[1]XResearch source}
Examine the tip that you plan to put through the needle, and make sure that it is sharp and tight. Moisten and squeeze the tip by putting it between your lips. Bring the strands to a sharp point that will fit through the eye of the needle. If the tip of the thread is uneven, trim it down with scissors.
Advertisement
Compare the eye (the hole at the top) of the needle with the thickness of the thread. The thread should be able to easily fit through the eye. If the thread is too thick, try to find a thinner thread or a needle with a wider eye.^{[2]XExpert SourceMia Danilowicz
Master TailorExpert Interview. 8 January 2021.} If you're new to sewing, and the work isn't terribly intricate, try using a needle with a large eye for easier threading.^{[3]XResearch source}

Method 2

Method 2 of 3:

Threading the Needle

Download Article

1
Hold the thread in one hand and the needle in the other. At first, it's generally easiest to grip the needle between the thumb and forefinger of your non-dominant hand. Hold the thread comfortably between the thumb and forefinger of your dominant hand. Raise the needle and the thread up to your eye level, about two inches apart. Make sure that there's plenty of light to see everything clearly!^{[4]XExpert SourceMia Danilowicz
Master TailorExpert Interview. 8 January 2021.}
- Consider pinching the thread between your fingers so that only the tiniest tip is visible. If you're having trouble, this technique might help you steady the thread.^{[5]XResearch source}
2
Guide the thread into the eye of the needle. Line the tip of the thread up with the eye-hole, and make sure that you have a clear view of the hole. Keep your hands steady. Push the thread slowly and surely through the eye-hole until you see it poke through the other side.^{[6]XExpert SourceMia Danilowicz
Master TailorExpert Interview. 8 January 2021.}
- Try holding the needle sideways, so that you can't see the eye, but you can see the thread as soon as it peeks through the eye.^{[7]XResearch source}
- This may take a couple of attempts. Keep trying! If you're having trouble, try moistening and smoothing the tip of the thread again.
- If you keep trying, but you can't get it, consider using a needle with a bigger eye-hole.^{[8]XExpert SourceMia Danilowicz
  Master TailorExpert Interview. 8 January 2021.}
Use your fingertips to carefully tug more of the thread through the eye. Go for at least 10cm (four inches) so that there's little chance of the thread-tip slipping back through. Let this end hang through the needle eye, and shift your attention to the other end of the thread.

Method 3

Method 3 of 3:

Securing the Thread

Download Article

Let one end of the thread hang through the eye of the needle. Hold the other, longer end between the thumb and forefinger of your non-dominant hand. Make sure that you have a sturdy grip!
Loosely loop the end of the thread around your finger – enough that it is secure, but not so tightly that it cuts off circulation. Wrap the thread three times around for sturdiness.
Use the thumb of the same hand to roll and slide the thread off the tip of your forefinger. The thread should form a tangled loop as you do this. Don't worry if it doesn't look neat – as long as there's a loop!
Grasp the loose loop between your thumb and forefinger. Now, pull it down toward the end of the thread until it tightens into a knot. This process is simple, but may take a little practice. Once you've knotted the end of the thread, you can be sure that it won't slip through the eye of the needle. Make sure that the knot is thicker than the eye is wide!^{[9]XResearch source}

Expert Q&A

Search

Add New Question

Question
How do you thread a needle with a small eye?
Mia Danilowicz
Master Tailor
Mia Danilowicz is a Master Tailor who works onset and on the red carpet in Los Angeles, California. With over a decade of experience, Mia specializes in bridal and gown couturier fittings, garment reconstruction, and custom design. Mia has worked at the Oscars, Grammys, SAG Awards, and Golden Globes. Her clients include a long list of entertainment and fashion industry headliners, major fashion magazines, luxury consumer brands, and popular media. Mia was trained at the Fashion Institute of Design and Merchandising and received her AA in Fashion Design and BS in Business Management.
Mia Danilowicz
Master Tailor
Expert Answer
You can use a needle threader, which is a smaller metal device that has a wider wire-like opening. To use the needle threader, insert it into the eye of the needle, put the end of your piece of thread through, and gently pull it out of the eye of the needle leaving only your thread looped through.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 5
Question
What is a hand needle?
Michele
Top Answerer
It’s a needle used for sewing by hand, as opposed to a needle used by a sewing machine.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 6