How to Start and Stop a Manual Car

Download Article

Explore this Article

parts

1Starting the Engine

2Stopping the Engine

Other Sections

Expert Q&A

Tips and Warnings

Related Articles

References

Download Article

Starting or stopping the engine of a manual car is a little tricky for first time manual drivers as it is not as simple as an automatic car. The path to being able to drive a stick shift (manual) car begins with learning how to start and kill the engine in the safest way possible.

Steps

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

Select MakeAudiBMWCadillacChevroletChryslerDodgeFiatFordGMCHyundaiJeepKIALexusMazdaNissanRamToyotaWagoneerOther*

Select ModelOther*

Select Year (optional)I don't knowOther

Ask

Part 1

Part 1 of 2:

Starting the Engine

Download Article

1. 
   1
   Understand the different aspects of a manual vehicle. Unlike automatics cars, manuals, or stick shifts, have three pedals. The brake and gas pedals are in the same locations as the locations you would find them in an automatic car. However, manual cars are equipped with a third pedal called the "clutch." This is the pedal furthest to the left.

   • The gear shift of a manual car is also slightly more complicated than an automatic car. Manuals have several different gears ranging from 1 to 5, depending on the type of car (some have a sixth gear). Then, like all cars, they have the "R" for reverse. Putting the gear shift into the center position will put it into neutral.
2. 
   2
   Locate the "clutch". This is the pedal furthest to your left. Unlike an automatic car, a manual requires the driver to use both feet. The left foot is responsible for the clutch and the right foot is responsible for the brake and gas pedals.
   Advertisement
3. 
   3
   Make sure the car is in neutral. Before starting the vehicle, make sure the gear shift is in the neutral position. This is when the gear shift is in the center position - you should be able to easily shake the gear shift. This is because it is detached from the transmission and should freely move.

   • Some drivers may leave their car in first gear when they put it into park just in case the brake gives out. If you were to start the car in first gear then it will cause the car to jump forward causing damage to the transmission of the vehicle, its exterior, and the vehicle's surroundings.
4. 
   4
   Put the key into ignition. However, do not turn the key just yet.
5. 
   5
   Place left foot onto clutch. Making sure the parking brake is still pulled up. Place left foot onto the clutch and push it down.
6. 
   6
   Turn ignition. While keeping left foot on clutch, turn the ignition. Wait for the engine to start before letting go of key. Once the engine is running, it is safe to take your foot off of clutch, but make sure the parking brake is pulled up.
Advertisement

Part 2

Part 2 of 2:

Stopping the Engine

Download Article

1. 
   1
   Get ready to park car. Once the car is in a position in which it can be parked, the driver should keep their foot on the clutch until the gear shift is in neutral. If the foot is removed from the clutch before the car is put into neutral, the car will jump.

   • Now that the car is in neutral, the driver can release the clutch while keeping their foot on the brake pedal.
2. 
   2
   Put car into park. Once the car is in a position in which it can be parked, the driver should keep their foot on the brake until the parking brake is pulled up. Once the parking brake is up, the driver can remove their foot from the brake. The car is now parked.
3. 
   3
   Turn off ignition. The key can now be taken out of the ignition.
4. 
   4
   Place car into first gear. This step is optional and an extra precaution. Once the ignition has been turned off the car can be placed into first gear as an extra precaution. This can be done by pushing down on the clutch and then placing the gear shift into first gear.
Advertisement

Expert Q&A

Search

Add New Question

• Question

  How do you change gears in a manual car smoothly?

  

  Ibrahim Onerli
  Driving Instructor

  Ibrahim Onerli is a Driving Instructor and the Manager of Revolution Driving School in New York City. His mission is to make the world a better place by teaching safe driving. Ibrahim trains and manages a team of over eight driving instructors. He specializes in teaching defensive driving and stick shift driving.

  

  Ibrahim Onerli

  Driving Instructor

  Expert Answer

  While the car is in motion, take your foot off of the gas pedal, press the clutch, and change your gear. Then, gradually take your foot off of the clutch and apply the gas.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 0Helpful 13

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Tips

• Practice in an open area to prevent any damage to vehicle or surroundings.
  Thanks

  Helpful1Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Advertisement

Warnings

• Make sure never to release foot from clutch when the car is not in neutral. This will cause it to jump and stall.
  Thanks

  Helpful8Not Helpful7

Advertisement