How to Stain Veneer

Download Article

Explore this Article

methods

1Oil Stain Veneer

2Water Stain Veneer

Other Sections

Questions & Answers

Video

Things You'll Need

Related Articles

References

Download Article

Veneer is very thin sheets of hardwood sliced from logs for use mainly in the furniture industry. Veneer allows a craftsman to finish a woodworking project with a beautiful exotic wood that might not otherwise be affordable or attainable. Since veneer is real wood, it is stained in much the same manner as a solid piece of wood, but there are differences in technique between the 2 that should be noted.

Steps

Download Article

1. 
   1
   Choose your stain for the project. You have a choice of oil based, water based and gel stains. Each one has slightly different qualities that make it ideal for one wood but not another.

   • An example of this is that some trees, such as teak and rosewood, have more natural oil in them than other woods such as oak or hickory. The oily wood will not take a water based stain as well as one of the less oily woods, so this has to be considered when choosing stains.
   • The basic steps for staining veneer are the same but setting and waiting times are different for each of the stains, gel, oil and water.
2. 
   2
   Check the veneer carefully to see that it is smooth. Most mill sawn veneer and backed veneer will not need sanding. Mill sawn veneer is very thin, 1/42 inch (0.60 mm) and will not stand up to heavy sanding.
   Advertisement
3. 
   3
   Sand carefully if necessary, starting with a 180 grit sandpaper and being sure to follow the direction of the wood grain. Stop and check frequently to avoid damaging the veneer.
4. 
   4
   Clean veneer thoroughly.
5. 
   5
   Stir stain vigorously before use and every 30 minutes while working. Test for correct color on a piece of scrap veneer or in an inconspicuous spot.
6. 
   6
   Brush on a wood conditioning product if your veneer is a soft or porous wood such as pine. Allow the conditioner to stand for 5 to 15 minutes, and wipe off with a clean rag. Do not wait more than 2 hours before applying gel stain.
7. 
   7
   Apply stain to veneer with a rag, soft bristle paint brush or a foam brush, following the wood grain. Allow it to set for 3 minutes and wipe off stain with a clean rag, again following the grain of the wood.
8. 
   8
   Allow to dry for 8 to 10 hours. If the color is not deep enough, apply additional coats in the same manner as the first until you have the desired look.
9. 
   9
   Allow to set up for 24 hours before applying a sealer if desired.
Advertisement

Method 1

Method 1 of 2:

Oil Stain Veneer

Download Article

1. 
   1
   Apply oil stain with a cloth or soft bristle brush, following the grain of the wood. Wait 5 to 15 minutes to allow stain to penetrate the veneer, and then wipe off excess stain with a clean cloth, again following the grain of the wood.
2. 
   2
   Apply second coat of stain, if needed, once the 1st coat has set up, usually 4 to 6 hours.
3. 
   3
   Allow to dry for 8 hours before applying a sealer if desired.
Advertisement

Method 2

Method 2 of 2:

Water Stain Veneer

Download Article

1. 
   1
   Apply a pre-stain conditioner and let it set up for 1 to 5 minutes. Conditioner is usually necessary when using a water based stain. Wipe off excess with a clean cloth.
2. 
   2
   Apply water stain with a cloth, synthetic bristle brush, paint pad or foam brush, following the grain of the wood. Allow stain to penetrate for no more than 3 minutes before wiping off excess with clean cloth that is slightly dampened with the stain, again following the grain of the wood.
3. 
   3
   Apply second coat of stain, if needed, once the 1st coat has set up, usually 2 hours.
4. 
   4
   Wait at least 3 hours before applying a sealer coat if desired.
Advertisement

Community Q&A

Search

Add New Question

• Question

  If I want to stain something darker, do I go through the same steps as the bare veneer?

  

  Community Answer

  Nope, just add the stain to darken it up. You'd only start from scratch if you wanted to go lighter, which you don't because it's veneer.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 6Helpful 4
• Question

  I want to use veneer tape on the edge. Do I put it on before or after I stain my shelf?

  

  Community Answer

  You put the edge banding on before you stain, then you stain the shelf and the edge at the same time. This makes for a more uniform color.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 0Helpful 4
• Question

  How do I remove old wax from a walnut veneer table?

  

  Community Answer

  You can use a torch or heat gun, but that might release the veneer glue. Any stripper from Home Depot or Lowes would work, but make sure you rub the surface with ScotchBrite and lacquer thinner. Then, scrub the surface with a new ScotchBrite and Naptha. If the Naptha doesn't flash off (evaporate) immediately, you must repeat above steps.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn

  YesNo

  Not Helpful 0Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Things You'll Need

• Paint brush
• Foam brush
• Paint pad
• Sandpaper
• Stain
• Wood conditioner
• Clean cloths
• Wood sealer