How to Solder Jump Rings

Soldering is the process of heating metals and permanently binding them through the use of an added solder. Whether you need to use this technique for jewelry making or a number of other household projects, soldering jump rings is a common technique for do-it-yourself enthusiasts. Read the following article to learn how to solder jump rings for your at-home projects.

Steps

Download Article

2
There is only one temperament of solder that requires a lower heat (called low-temperature solder). Jump rings, therefore, do not require a solder that melts at a very high temperature.
- Cut extra-easy solder into very small chips using tin snips that do not exceed .03 inch (1 mm) squares.
Advertisement
^{[1]XResearch source}
5
Apply flux to both ends of the opened jump rings with a small, fine paintbrush.
- Flux is an agent that assists the solder in flowing into the joint. Flux comes in a variety of forms, but one common form is borax.
^{[2]XResearch source}
7
Place your jump ring on a charcoal block.^{[3]XResearch source}
- Before soldering jump rings, the joint should be touching the block.
^{[4]XResearch source}
^{[5]XResearch source}
11
Heat the jump ring as well the charcoal block and do not directly heat the solder.^{[6]XResearch source}
- When you solder metal jump rings, the solder will flow to the hottest place.
12
Watch for the solder to melt.
- The solder will have a liquid appearance at this stage.
Immediately remove the heat.
15
Place the jump ring into a pickle solution.^{[7]XResearch source}
- A pickle is a solution that removes a layer of oxidation on the soldered metal.

Community Q&A

Search

Add New Question

Question
Can I use a soldering iron instead?
T. Chinsen
Top Answerer
As long as the temperature of the soldering iron can reach the temperature of the solder, it can be used to solder the ring. Keep in mind that the metal also has to absorb enough heat to melt the solder. The solder torch provides a burst of high heat, while an iron gives a slower rate of heat on its tip.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 14

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Fusing of metal jump rings is not necessarily as strong as the bond of metals fused by a solder that melts at a higher temperature.
Thanks
Helpful2 Not Helpful0
The color of hard solder most closely matches silver. Extra-easy solder does not perfectly match that of silver, but it is much easier to work with.
Thanks
Helpful1 Not Helpful2

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Don't use a pickle solution on silver-plated items as the solution can actually remove a layer of silver, exposing the base metal.
Thanks
Helpful7 Not Helpful1
Don't apply an overabundance of flux into the jump ring joint. When you solder jump rings, you apply a flame, and the flux can bubble up from the heat. This can displace the solder chip.
Thanks
Helpful4 Not Helpful1