How to Shape a Beard

A full, luxurious beard makes an immediate statement. But if it’s not properly groomed, it may not be the one you want. Fear not—there are a few simple tricks you can draw on to help you figure out how best to wear your facial hair. A beard shape that offsets or accentuates your facial features will help create a look that's both masculine and mature. Once you've decided on a suitable style, you can maintain it by keeping it trimmed to a neat length and periodically touching up key areas like your sideburns, neckline, and cheeks.

Part 1

Part 1 of 4:

Choosing a Complementary Shape

Download Article

1
Identify your natural face shape. Take a look in the mirror and note what stands out to you. Do you have a chiseled jawline, or do your cheeks protrude slightly? Is your head a perfect oval or something that more closely resembles an inverted pyramid? Do a little creative visualization to determine what changes would be needed to achieve a more proportionate appearance.^{[1]XResearch source}
- If you really want to do your homework, measure your forehead, cheekbones, jawline, and find the distance between your crown and chin. The longest measurements will be an indicator of how your head and face are structured.^{[2]XResearch source}
- Zeroing in on the ideal beard style is largely a matter of knowing which features to highlight and which to draw attention away from.
- Regardless of your face shape, a beard can help balance out your nose, draw attention to your eyes, and make your chin look more defined.
2
Wear your beard longer to offset a round or blocky head. Crop the growth on your cheeks and sideburns closer to the skin and let the hair gradually get longer as it reaches your chin. A sleek taper will have a lengthening effect that makes each of your features appear more evenly balanced.^{[3]XResearch source}
- A small amount of beard oil or a low-hold pomade will help you maintain your carefully-crafted beard shape throughout the day.
Advertisement
3
Keep your beard bushy on the sides to fill out a thin, angular face. Some men have the opposite problem—a long, slender head shape that a pointy beard only exaggerates. If you’re one of these men, you can trim the hair on the tip of your chin to do away with excess length, but leave the thickest tufts around the cheeks and sideburns intact. This will add some volume around the sides of your face.^{[4]XResearch source}
- Your goal should be to sculpt a smooth, subtle curvature of the jawline.
- Be careful not to let your beard grow out too much on the sides, or it may push your face shape too far in the other direction.
4
Draw on more unique styles to hide thin, patchy areas. If your mustache doesn’t quite grow into your chin hair, you might dispense with it altogether and go for a swashbuckling style beard with a disconnected mustache and soul patch. Similarly, a no-man's-land between your goatee and the hair on your cheeks can be dealt with by deliberately leaving a strip of extra space on either side of your mouth.^{[5]XResearch source}
- Just because your facial hair isn’t thick and full all the way around doesn’t mean you can’t make what’s there work in your favor.

Part 2

Part 2 of 4:

Trimming Your Beard

Download Article

1
Comb out your beard. Run a fine-toothed beard comb or small hairbrush with flexible bristles through your facial hair from cheek to chin. Stroke the hair outward, away from your face, so that it all stands up in one direction. This will give you a better sense of how long your beard actually is and also make it easier to prune without making costly mistakes.^{[6]XResearch source}
- Daily combing is necessary to identify areas that need trimming, prevent tangles, and redistribute natural oils.
- Keeping your beard brushed out is also a useful way to create the appearance of added volume, since it gets the hairs fluffed up nicely.
Allan Peterkin, Master Barber
When shaping your beard at home, always start with properly washed and thoroughly combed facial hair. Use sharp, quality trimming tools, and take your time to trim in stages for even lines and proportions. Define edges with precision and detail work by feel versus sight alone. Finish with a boar bristle brush to blend and enhance volume and flow before styling as desired.
2
Use a beard trimmer to control how much you take off.^{[7]XExpert SourceTimmy Yanchun
Professional BarberExpert Interview. 22 January 2020.} Glide the head of the trimmer over your face slowly, using light pressure. If your goal is to thin out a bushy beard, use upward strokes, so that the blades of the trimmer cut square across the hairs. If you'd rather preserve more of the bulk you've been so committed to growing, move the trimmer downward in the same direction that the hair lays naturally.^{[8]XResearch source}
- Set the guard to about a 3 initially (which is usually somewhere around 9mm) and switch to a lower setting if you want to go shorter. That way, you can avoid accidentally shaving too much at once.^{[9]XResearch source}
- Beard trimmers offer a more customizable trimming experience because of their ability to cut hair to a consistent length with every pass, unlike scissors, which force you hack away at tufts piece by piece.
3
Work from the outside in. Start by buzzing both cheeks until you strike the desired balance between volume and tidiness. Once the sides look good, move the trimmer inward and go over your chin and mustache area. Double check that both sections are equally full, and that both halves of your face match.
- Most men's facial hair tends to be thicker around the goatee, so starting with the cheeks helps ensure that your beard comes out even without having to go shorter on the sides than you'd like.
4
Create transition with your sideburns. Sideburns are tricky, since they can be treated as either an extension of your beard or your head hair. Assuming that your head hair and facial hair are approximately the same length, you can let what's up top flow seamlessly into what's underneath. If one is significantly longer than the other, try fading your sideburns using increasingly smaller guards so that the difference isn't too jarring.
- For extremely short hairstyles like buzz cuts and shiny bald domes, blend your sideburns until they disappear around the top of your ear.
- Longer locks are a little simpler. Just keep your sideburns clean and neat, then leave everything above and below your ears as shaggy as you please.

Part 3

Part 3 of 4:

Structuring Your Neckline

Download Article

1
Place two fingers just above your Adam’s apple. Hold the fingers sideways, so that they lay across your throat. This is the sweet spot where you should begin your neckline. You’ll be leaving just enough growth beneath your jaw to ensure a natural transition without letting it get out of control.^{[10]XResearch source}
- If you’re having trouble finding the exact point, feel for the rigid lump in your windpipe, then slide your fingers up until they rest in the little groove at the top.
- Most stylists recommend that a beard should terminate about 1–1.5 inches (2.5–3.8 cm) above the midpoint of your neck.^{[11]XResearch source}
2
Shave all the hair below your upper finger. Take a mental snapshot of the exact point, or make a small mark with your clippers to serve as a reference. Shear off the beard’s lower extremities so that it forms one clean line straight across.
- Your neckline is every bit as important as the rest of your facial hair. A sloppy-looking neckbeard can sabotage an otherwise sophisticated style.
3
Shape your neckline in a gentle curve from ear to ear. Now it’s time to apply the finishing touches. Picture an imaginary line running beneath your chin in a shallow “U” shape. Using your clippers, chip away at the remaining hair on both sides of your Adam’s apple. When you’re finished, your neckline should roughly mirror the shape of your jaw.
- Be careful not to start your neckline too high up. A lower jaw that’s completely hairless can make your beard look like it lacks coverage.^{[12]XResearch source}
4
Remove any remaining stubble with a manual razor. Go back over the area you just buzzed to cut the coarse hair down to the skin. Not only will this leave your neckline looking pristine, it will also keep unwanted growth from returning quite so fast.
- To prevent irritating razor burn, lather up with moisturizing shave gel and make your strokes with the grain, not against it.^{[13]XTrustworthy SourceAmerican Academy of DermatologyProfessional organization made of over 20,000 certified dermatologistsGo to source}

Part 4

Part 4 of 4:

Keeping Your Beard Neatly Groomed

Download Article

1
Wash and dry your beard before shaping it up. Use shampoo and conditioner to clean and soften your facial hair regularly.^{[14]XExpert SourceTimmy Yanchun
Professional BarberExpert Interview. 22 January 2020.} After showering, hold off on trimming or styling until your beard has had time to fully dry and reassume its original form. This is when it will be most manageable, as it will have a little extra volume and look like it will when you’re out walking around.
- A few passes with a blowdryer on a low heat setting can help speed up the drying time.
- Attempting to shape a wet, limp beard is risky because the hairs will draw up and change shape as they dry.^{[15]XResearch source}
2
Clean up the lines of your cheeks. Guide your clippers along the upper perimeter of your beard to get rid of fuzzy overgrown edges. Ideally, your facial hair should be just as thick at the top as it is at the bottom instead of becoming sparse and fading away. The same rules apply even if you decide to trim it down nearer to your jawline.^{[16]XResearch source}
- Generally, it’s best not to let your beard climb any higher than the points of your cheeks. It may help to visualize a line running from the top of your mustache to your sideburns.
- When it comes time to manicure the top half of your beard, you’ll want to follow your natural contours rather than choosing an approximate stopping point like you did with your neckline.
3
Trim stray hairs to an even length. Use a pair of scissors to snip any scraggly or overly-long strands that have managed to escape your clippers.^{[17]XExpert SourceTimmy Yanchun
Professional BarberExpert Interview. 22 January 2020.} Tilt your head at different angles so you can more easily see hairs that are sticking out. Each part of your facial hair should be a uniform length.^{[18]XResearch source}
- Gently tease out longer sections with a comb to make them easier to clip.
- It’s perfectly acceptable to have a mustache or goatee that’s longer than the rest of your beard, as long as these sections are a consistent length.

Expert Q&A

Search

Add New Question

Question
How do I trim and shape my beard?
Laura Martin
Licensed Cosmetologist
Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.
Laura Martin
Licensed Cosmetologist
Expert Answer
Comb out your beard to separate, smooth, and detangle. Use clippers with a guard for the most even shape.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 3
Question
Where should my beard line be?
Laura Martin
Licensed Cosmetologist
Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.
Laura Martin
Licensed Cosmetologist
Expert Answer
That depends on both your face shape and your natural growth patterns, but generally, your beard should stop parallel to your ear lobes at the place where your neck meets your jawline.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 4
Question
How do you trim facial hair?
Laura Martin
Licensed Cosmetologist
Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.
Laura Martin
Licensed Cosmetologist
Expert Answer
You can use a clipper or scissors. For small trims, scissors provide the most customization and control. Comb the hair first then simply trim away hairs that extended beyond the desired outline.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Get in the habit of touching up your beard every 2-3 weeks, depending on how fast it grows and the look you’re going for.
Thanks
Helpful0 Not Helpful0
Follow up with a quality beard oil to restore moisture, fight itchiness and irritation, and keep your facial hair looking healthy.
Thanks
Helpful0 Not Helpful0
Don’t be afraid to try out different styles. If growing a beard has always been a frustrating experience for you, it could be that you just haven’t found the right way to tailor it to your face yet.
Thanks
Helpful1 Not Helpful0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Shave cautiously to avoid nicks, scrapes, and other mishaps.
Thanks
Helpful3 Not Helpful0
If you end up taking too much off, there may be no way to salvage it but to shave it off and start over.
Thanks
Helpful3 Not Helpful1