Download ArticleDownload ArticleThis article was co-authored by Matt Mimnagh and by How.com.vn staff writer, Janice Tieperman. Matt Mimnagh is a Master Carpenter and Owner of Castleguard Home Services based in Charlotte, North Caroline. Castleguard specializes in finish carpentry including the installation of moulding, trim, and built-in cabinetry. They also offer kitchen, bathroom, and other remodeling services.
There are 8 references cited in this article, which can be found at the bottom of the page.
How.com.vn marks an article as reader-approved once it receives enough positive feedback. In this case, 100% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 379,931 times.
Unlike smaller pieces of furniture, bookcases are usually filled with heavy objects and pose a safety risk if they fall. Attaching them to a wall is the best way to avoid accidents. All furniture should be secured in areas that have young children using them for support, or areas that are prone to earthquakes or other natural disasters.
Steps
Purchase a set of Velcro straps.[1] They should include long screws and wall anchors that will hold the straps firmly to your wall. You will not need to drill into the case itself using this method.
Use a stepladder and a pencil to draw a horizontal line where your bookcase meets the wall.[2]Advertisement
Remove the books and move the bookcase away from the wall. Use a stud finder to search for wall studs. If possible, find two studs and secure the bookcase with two straps to ensure a good hold.[3]- Secure the bookcase into wall studs whenever possible, instead of using wall anchors.
- It is best to secure the bookcase without the books in it, and then fill it up once you are finished.
Mark the stud locations with a pencil. Draw a vertical line. The two crosshairs are the locations where you will drill your wood screws into the wall.
Ask someone to line up the straps vertically and hold them in place. Make sure the adhesive layer is facing down. You will peel back the clear plastic cover after you are done drilling.
Drill the wood screws into the center of the straps, where there are holes for the screws. Use a cordless drill. The number of screws may depend on the brand of Velcro straps you use.[4]- If you couldn’t find a stud, you will need to make pilot holes and insert the wall anchors. Then, screw the wood screws directly into the wall anchors, where your lines meet.
Move your bookcase back into place, at the level where your screws are placed in the wall. Peel back the clear cover from the sticky adhesive and press the strap onto the top of the bookcase. For best results, don’t remove the adhesive strip to realign, or it may lose some of its hold.[5]
Remove the books. Move the bookcase out of the way.
Use a stud finder to locate studs in your wall. Use a yardstick to mark the center of the stud with a vertical line.[6]
Replace your bookcase, positioning it at a point right between the wall studs. If this is impossible, you can attach your brackets at the top, into a center stud.
Use a stepladder to gain access to the top of the shelf. For tall shelves, this is the best place to secure a bookcase into a stud because it is the least noticeable place.
Place an “L” bracket so that it is flush with the wall and the shelf. You can also use door chain latches in place of L brackets if you want to move the shelf regularly. Install the chain on the wall and the slide on the top of the shelf.[7]
Drill the L bracket into the top of the shelf with your cordless screwdriver using screws that will go all the way through the top of the shelf.
Ask a friend to hold the bookcase flush with the wall if it is tipping forward. Drill the other side of the L bracket into the wall with washers and three-inch wood screws. Drill until the screw head is almost even with the bracket, but avoid stripping the screw.- If you can’t find a stud, you should install wall anchors before you drive screws into drywall or masonry. Drill a pilot hole into the wall and push the wall anchor in. Then, align the brackets and drill with three-inch screws.
Repeat on either side of the shelf. Place an L bracket between the wall and the side of your shelf, where it will hit a stud. Repeat the same procedure on either side of the shelf.[8]
Community Q&A
- QuestionWhy do I need to find the studs? Can I secure the bookcase with brackets without finding the stud?
Community AnswerYou could use drywall anchors, preferably toggle bolts. Even with anchors, drywall is not as strong as wood and could potentially rip out. You should drill at least one side into a stud. - QuestionWhere do I get Velcro that comes with screws?
Ashton GilmoreCommunity AnswerYou would have to get the Velcro and screws separately. - QuestionWhat if it is on an outside wall?Community AnswerIt makes no difference if you secure the furniture to an outside wall. There will still be regularly placed studs within the wall. The only difference with an outside wall is the presence of insulation between the studs, which should have no impact on the anchoring process.
Tips
- Keep the tops of your bookcases free of items to reduce the risk of danger during an earthquake. Also, avoid stacking the books so that the shelf is top-heavy, or it may push away from the wall.[9]Thanks
- Use Velcro strips to secure objects to the shelves themselves. Adhere the bottom side to the top of a shelf and attach the other side to knick knacks or vases.Thanks
- For metal or plastic bookcases, use three-inch machine screws with washers to attach your brackets.Thanks
Things You'll Need
- Cordless drill
- Stud finder
- 3-inch (7.5cm) wood screws
- 3/8-inch screws
- Plastic wall anchors
- Washers
- L-Brackets
- stepladder
- Velcro straps
Expert Interview
Thanks for reading our article! If you’d like to learn more about woodworking, check out our in-depth interview with Matt Mimnagh.
References
- ↑ https://www.earthquakecountry.org/step1/bookcases/
- ↑ https://youtu.be/AXbFRtaTi0I?t=24
- ↑ https://youtu.be/AXbFRtaTi0I?t=39
- ↑ https://youtu.be/AXbFRtaTi0I?t=73
- ↑ https://www.youtube.com/watch?v=AXbFRtaTi0I
- ↑ https://www.earthquakecountry.org/step1/bookcases/
- ↑ http://www.familyhandyman.com/woodworking/bookcase/bookcase-and-shelf-tips/view-all#step3
- ↑ https://www.todayshomeowner.com/video/how-to-secure-tall-furniture/
- ↑ https://www.fema.gov/press-release/20210318/tips-reduce-earthquake-damage
About This Article
To secure a bookcase to a wall with brackets, start by using a stud finder to locate the studs in your wall. When you find a stud, mark the center of it with a vertical line using a yardstick and pencil. Then, position your empty bookcase at a point between the wall studs. Once the bookcase is positioned, place an "L" bracket on top so it is flush with the wall and shelf and use a drill to attach the bracket to the top of the shelf. Finally, use a drill to attach another "L" bracket between the wall and the side of the shelf. For more tips, like how to secure an antique bookcase to a wall using Velcro, read on!
Reader Success Stories
"Thank you for your time and dedication. I haven't yet started installing my bookshelf, but thanks to this site, I now have a great chance of success."..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
