How to Root the Samsung Galaxy Tab 3

Download Article

Preparing the Tablet

|

Installing Odin

|

Rooting Your Tablet

|

Q&A

This How.com.vn teaches you how root your Samsung Galaxy Tab 3 using free tools called Odin and SuperSU. Rooting requires a bit of technical know-how and is not supported by Samsung or Google. You'll need a PC running Windows and a USB cable to complete the rooting process.

Samsung Galaxy Tab 3 Rooting Overview

Charge your tablet and back it up, then put your tablet in Developer Mode. Install Odin, SuperSU, and the drivers for your Galaxy Tab 3 on your PC. You'll also need the root package for your Galaxy Tab 3 model. Put your tablet in Download Mode and connect to your PC, then run Odin and follow the on-screen guide.

Part 1

Part 1 of 3:

Preparing the Tablet

Download Article

1
Charge your tablet to at least 75%. The rooting process may take up to several minutes to complete and requires near-full battery life.^{[1]XResearch source}
- Rooting is not supported by Android or Samsung. It is also not guaranteed to work successfully on all tablets. Keep this in mind when attempting to root and do so at your own risk. If your Galaxy Tab 3 becomes bricked or inoperable after rooting, see this How.com.vn for more information.
- Rooting your Galaxy Tab 3 will void the manufacturer’s warranty. To reinstate your warranty, or to undo rooting, follow these steps to unroot your Android and restore the original factory settings.
2
Back up your personal data. Rooting erases all of your data, so you'll probably want to back up everything on your tablet. You can use Google’s servers, an SD card, your computer, or a third-party cloud storage service to back up your data.
- See this How.com.vn for more information on backing up your Samsung Galaxy.
Advertisement
You'll find it in the app drawer.
It's at the bottom-left corner of the screen.
After the 7th tap, you'll see a message that says you are now a Developer.
This menu appears only after tapping the build number 7 times.
This allows you to make changes to your tablet after connecting the device to your computer via USB.
There are three different versions of this tablet: 7.0, 8.0, and 10.1. The model numbers refer to the tablet's screen size in inches. If you're not sure of your tablet's size, you can find it in the About device section of the Settings app.

Part 2

Part 2 of 3:

Installing Odin

Download Article

Go to https://odindownload.com in your PC's web browser. This is a download site for Odin, a tool you'll need to install to root your tablet.
2
Click the version of Odin you want to install. The version you select depends on the version of Android that's running on your tablet.^{[2]XResearch source}
- If you're using Jellybean or KitKat, select 3.09.
- For Lollipop, select 3.10.7.
- For Marshmallow, select 3.11.1.
Depending on the version, you may have to click Download now or select the version again first. This downloads a ZIP file containing Odin to your computer.
You can do this by right-clicking the downloaded folder, selecting Extract All, and then choosing a destination.
5
Download the root package for your Galaxy Tab 3 model. The package you'll need varies depending on whether you have the 7.0, 8.0, or 10.1 model.
Go to https://www.samsung.com/us/support/downloads on your computer. Now you'll need to install some files on your computer that allow you to connect to the tablet via USB.
To do this, select Mobile, click Tablets, then Galaxy Tabs, and then choose your version from the "MAKE SELECTION" drop-down menu.
A list of downloads will appear.
This downloads the drivers as an installation program.
Double-click the downloaded file (it should begin with "SAMSUNG_USB_Driver" and end with ".EXE"). You may have to give the app permission to run. Once you do, follow the on-screen instructions to complete the installation.
You can download the latest version of SuperSu zip here. This saves a ZIP file to your PC. You won't need to unzip it, but remember where it's located.

Part 3

Part 3 of 3:

Rooting Your Tablet

Download Article

1
Put the tablet into Download Mode. Follow these steps to do so:^{[3]XResearch source}
- Turn off your tablet by pressing and holding the Power button.
- Press and hold the Volume Down + Home + Power buttons on your tablet.
- After about 2-3 seconds, lift your fingers from these buttons.
- Press the Volume Up key when you see the warning screen with an exclamation point. The tablet is now in Download Mode.
You can do this by right-clicking the file called Odin.exe on your PC, selecting Run as administrator, and then following the on-screen instructions.
Odin will take a moment to detect your tablet. Once detected, it'll appear as “Added” in the Odin message box.
4
Click the PDA or AP button and select your root package. This is the file you downloaded earlier that's specific to your model.
- The name of this button varies depending on the version.
^{[4]XResearch source}
Odin will begin rooting your tablet, which may take several minutes to complete. When the installation is finished, you'll see "Pass" in the Odin message box.
Don't unplug the USB cable, as you'll need to flash SuperSU next.
8
Boot into recovery mode. Follow these steps to do so:
- Press and hold Volume Up + Home + Power buttons on the tablet.
- When you see the Samsung logo, release the Power button but continue holding down the Volume Up and Home buttons.
- Lift your fingers from the remaining buttons when you see the screen with "TWRP" at the top-left corner.
A list of files will appear.
A confirmation message will appear.
This flashes SuperSU to your tablet, which will give you root access. Once the flash is complete, move to the next step.
12
Reboot your Galaxy Tablet. You can do this in the Reboot section under System. Once your tablet reboots, the SuperUser app will appear in your app drawer, which indicates that the rooting was successful.
- You can disconnect the tablet from your computer now as well.

Community Q&A

Search

Add New Question

Question
What happens if it says fail in the box that is supposed to say pass?
ThomasM10
Community Answer
If the process initiated through Odin fails, your phone or tablet will most likely restart (because of auto restart feature being checked by default). If you can see the lock screen, good news, your device has survived the failed process. If it bricks, however, meaning that it becomes unusable, renew the procedure via Samsung's own recover utility: Samsung Smart Switch.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 8
Question
I'm at part 3 step 10. I see a supersu folder on the tablet but no file.
Ben Tuitama
Community Answer
The "11 Download SuperSU to your PC" requires you to copy the file from your PC to the tablet either into the internal storage or SD card.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 8