How to Ride Downhill on a Skateboard

Ridding downhill on a skate board can be fun. But if you don't do it right, it can be very dangerous. If you are worried about safety, or just want to know how to do it right on your first try, then this How.com.vn is for you.

Steps

Download Article

1
Learn how to stop first! The most common and safe method is to footbrake. Take your back foot off of the board and slide it along the ground until you slow down and stop.^{[1]XResearch source}
- If you're comfortable enough on the board, you can also tailslide. With your back foot on the tail, push down on it so the tail drags along the ground. Lean forward so the board doesn't slide out. This is not recommended by most people because it tears up the tail of your board.
- An alternative to tail-sliding that doesn't tear up your tail is to heel-slide. It's the same thing as a tailslide except your back foot's heel is hanging over the back of the tail, so the heel of your shoe slides on the ground instead of the tail sliding on the ground.
Wobbles start in the back, so it is good to have the front trucks looser than the back trucks. Just make sure that they are not too tight or it might be harder to carve/turn. This is the best thing to do because this will help minimize your wobbling when you are going fast. As you get more comfortable with your abilities, you can start to loosen your trucks.
Advertisement
When you get nervous or afraid, you put tension in your muscles which can cause you to over correct each turn. If you stay relaxed and loose, the likelihood of getting speed wobbles is dramatically reduced.
Crouching with your knees while going downhill will also reduce speed wobbling. Don't crouch too low. Also remember to keep your legs fairly loose, otherwise you may get additional speed wobbles from your muscles tensing. If you begin to experience speed wobbles try to loosen up your legs and slowly straighten up your stance. Keeping your weight over your front trucks will also help to minimize speed wobble and give you better control over your board.
5
Bail out only if you absolutely have to. Otherwise, there are several things that you should always attempt first:^{[2]XResearch source}
- Try making very wide, deep carves to slow yourself down.
- Foot brake to lose some speed by lightly dragging your foot off the deck and on the ground. This is one of the easiest and most effective ways of scrubbing off speed, especially when there isn't enough room to carve. Bailing should be done only as a last resort, but if necessary try to bail onto grass or make sure that you roll when you fall.

Community Q&A

Search

Add New Question

Question
How do I deal with small objects and rough surfaces when riding downhill?
Community Answer
Try to avoid them! Don't turn too sharply, because that's dangerous, but check the hill for any debris you can remove and anything you need to avoid before riding. Don't ride on surfaces that could potentially be dangerous. Take it from me, I broke my arm riding my skateboard.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 32
Question
If i'm just starting out learning to skateboard, should my trucks be loose or tight?
Lukas Oštrec
Community Answer
Loose trucks will make your turning faster and sharper, but not so stable. Tight trucks are really stable, but turn slower. It's your choice, it depends on how well you can balance.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 23
Question
Why does my front foot start hurting if I skate for long periods of time?
Community Answer
The vibrations of the board combined with putting of all your weight on one foot while peddling will cause your foot to start hurting.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 33

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Before you attempt to ride downhill, check everything, like your wheels, bearings, and people that might get in your way.
Thanks
Helpful23 Not Helpful1
Make wide, steep carves to help slow yourself down.
Thanks
Helpful89 Not Helpful16
Learn to carve. If you don't know what that is then watch surfers, the wide turns they do are called carves. Chances are you know how to do this already because it's the only kind of turning besides kickturning, but it's good to practice.
Thanks
Helpful24 Not Helpful2

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Don't take on a big hill as a beginner, it is dangerous. Remember to be able to ride at higher speeds confidently before you take on a big hill.
Thanks
Helpful37 Not Helpful6
If you fall, rolling is the key.
Thanks
Helpful44 Not Helpful8
While dragging your foot on the cement slows you down, it can eat away at your shoe very quickly.
Thanks
Helpful49 Not Helpful10
Remember to wear your proper protective gear when riding your skateboard. It doesn't sound attractive, but in the long run it'll greatly reduce your risk of injury if you fall or have to bail out.^{[3]XResearch source}
Thanks
Helpful1 Not Helpful0