How to Fix a Parking Brake Light That Won’t Turn Off

Download Article

Troubleshoot your stubborn parking brake light with these 5 tips

Download Article

Resetting the Parking Brake Light

|

What does the parking brake light mean?

|

What should I do when my parking brake light comes on?

You’re leisurely driving down the road when you see your parking brake light illuminating your dashboard. You swear you put your parking brake down, so how can you get rid of this warning? In this article, we’ll go over several different ways to troubleshoot why your parking brake light might still be on. Then, we’ll answer your questions about what the parking brake light means and what to do when it comes on as you’re driving.

Things You Should Know

Double check that your parking brake is fully disengaged.
Fill up your brake fluid reservoir with brake fluid if it’s below the max line.
Look underneath your parking brake for loose and frayed cable connections. If you see any, take your car to a mechanic to fix them.
Unplug the brake fluid sensor below the brake fluid reservoir to see if the light turns off. If it does, contact your mechanic to replace the sensor.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Section 1 of 3:

Resetting the Parking Brake Light

Download Article

1
Check that the parking brake is disengaged. It might seem obvious, but the first thing to do is make sure that the parking brake is switched off. Whether you have a parking brake with a hand lever, floor pedal, or electronic switch, make sure it’s in the off position. A parking brake that is even slightly nudged into the on position can trigger your light to come on.^{[1]XResearch source}
- After ensuring that it’s disengaged, turn your car off and on again. If your parking brake light is still on after idling for a minute, troubleshoot further with the methods below.
2
Fill up on brake fluid if it’s low. This is one of the most common reasons why your parking brake light stays on or flickers as you drive. While the parking brake light’s primary job is to warn you that it’s still engaged, it can also come on when your regular brakes need more fluid. When it’s low, you might notice that your brake doesn’t resist you as much or feels soft and spongy when you press it down.^{[2]XResearch source}
- To check your brake fluid, turn off your car, let it cool, and open the hood. Find the white fluid reservoir on the driver’s side, which is usually above the master cylinder. If the fluid is below the max line, fill it back up with the fluid specified for your car. Then, let your car run to see if the light turns off.
- Spongy brakes and low fluid can also be a sign of a leak. Check underneath your car for colorless, dripping fluid. Leaks often come from under the wheels or near your brake line. If you’re comfortable, fix the leak yourself, or take your car to a mechanic.^{[3]XResearch source}
- If your brakes are squeaky or your car pulls off to one side, it’s also a good idea to check your brake pads. If they are thin and well worn, replace them.
Advertisement
3
Check your parking brake switch for loose, damaged wires. If adding brake fluid doesn’t turn off your light, your parking brake switch might be faulty. Look for the switch below your parking brake, pulling up the driver’s side floor mat or middle console if you have a floor pedal or hand lever. If you see any frayed or loose wires coming out of the brake, take your car to a mechanic to get it checked out.^{[4]XResearch source}
- To confirm that you have a faulty switch, use a multimeter to test the switch’s continuity when the parking brake is engaged.
- Your parking brake switch sends a signal to your car when the parking brake is on or off.
The brake fluid sensor notifies you when your brake fluid levels are low. If it’s damaged, it might keep your parking brake light on. With your car off, look for the sensor under your car’s hood. It’s usually located under the brake fluid reservoir and looks like a black electrical connector. Unplug the sensor and turn your car on. If the light turns off, the sensor is likely faulty and needs to be replaced by a mechanic.^{[5]XResearch source}
If you notice “ABS” lit up on your dashboard, or none of the other solutions reset your parking light, there might be an issue with your ABS system. The ABS system is made up of various parts and sensors that help prevent your wheels from locking up when you make a sudden stop. Because it’s a pretty complicated system, go to your mechanic to get your car checked out.^{[6]XResearch source}

Section 2 of 3:

What does the parking brake light mean?

Download Article

The parking brake light usually means that your brake is engaged. When this indicator lights up on your dashboard, which is usually a red “P” enclosed in a circle, it’s warning you that your parking brake is still on. When you push the parking brake hand lever, floor pedal, or switch back into place, the light usually turns off.^{[7]XResearch source}
- Your parking brake is separate from your car’s regular brakes. When you use the parking brake, steel cables tighten around your wheel’s brake rotor. This prevents your wheels from moving or turning.

Section 3 of 3:

What should I do when my parking brake light comes on?

Download Article

If your light turns on, pull over and disengage your parking brake. Pull over in a safe spot, like the shoulder of the road or a nearby parking lot. Make sure that your parking brake is off by pushing the hand lever, floor pedal, or eclectic switch down. If your light is still on when you turn on your car, call a towing service to take your car to your home to troubleshoot the issue, or to a mechanic.^{[8]XResearch source}
- Do not drive when your parking brake light is on. Driving with the parking brake engaged can cause damage to your transmission that’s costly to fix.