How to Remove Paint from Light Fixtures

Sometimes, in the course of painting a room or ceiling, a small amount of paint will end up on a light fixture. Or maybe it was painted on purpose to create a new look. Either way, if you want to remove it, you can easily strip it from both the fixture and glass with a little elbow work and patience.

Part 1

Part 1 of 3:

Creating a Safe Workspace

Download Article

1
Shut off the power. Whether you are removing the light fixture from the ceiling or wall, or stripping it as it is, cut off the electricity before you start. Go to your circuit breaker or fuse box. Switch off the appropriate circuit or unscrew the correct fuse. Eliminate the risk of electrical shock and injury.^{[1]XResearch source}
- If your circuits or fuses are missing labels, either shut off all the power or test each one until you find the correct one.
2
Remove the light fixture. If possible, favor taking it down over cleaning it where it is. Reduce the chance of stripping paint from the ceiling or wall by accident. Work in an area of your choosing, with proper ventilation and safer footing than a ladder. Exact instructions for removing light fixtures will vary according to their design, but generally they follow these points:^{[2]XResearch source}
- Taking light bulbs out to avoid damage.
- Unscrewing the plate from the mounting bracket in the ceiling.
- Using a circuit tester to confirm that the wiring is powerless.
- Disconnecting the wiring.
Advertisement
3
Protect other surface areas. Lay down a dropcloth, tarp, newspapers, or similar material over the floor. If you have removed the light fixture, also cover your worktable. If you are using more than one covering, check for gaps between them. If you are keeping the fixture in place, apply painter’s tape around it to protect the ceiling or wall.^{[3]XResearch source}
- Drips from the cleaning agent may strip paint or otherwise mar other surfaces.
4
Protect yourself. Wear cleaning gloves. Protect your eyes with safety glasses, especially if you are working from underneath the fixture. If using a ladder, make sure it is high enough to work safely, rather than overreach and lose balance on a shorter ladder. Open windows and use fans to create cross-breezes for circulation.^{[4]XResearch source}
- Fumes from cleaning agents may be overpowering or poisonous. For long projects or areas with poor ventilation, wear a ventilation mask, especially if you are working on a ladder.

Part 2

Part 2 of 3:

Stripping Paint from Fixtures

Download Article

1
Determine the type of paint. If you painted the fixture yourself, ask yourself what you used: latex, acrylic, or spray paint.^{[5]XExpert SourceJeff Baldwin
Residential PainterExpert Interview. 1 March 2021.} For latex or acrylic, you will need rubbing alcohol to strip it.^{[6]XResearch source}^{[7]XResearch source} For spray paint, you will need acetone.^{[8]XResearch source} If someone else painted it, look for brush strokes, which indicates latex or acrylic paint.
- If you are still unsure, select two separate areas to test each chemical.^{[9]XExpert SourceJeff Baldwin
  Residential PainterExpert Interview. 1 March 2021.} Do not mix rubbing alcohol and acetone by applying it to the same area. Wipe off whichever one doesn’t work, wipe again with clean water to rinse, and let it dry before using the other.
2
Soak your cleaning cloth. If the area to be cleaned is very small, simply wet a corner with rubbing alcohol or acetone. For larger surface areas, pour the agent into a plugged sink or bowl and soak the whole cloth. Wring out any excess to reduce the chance of accidental drips.^{[10]XResearch source}
- Both rubbing alcohol and acetone may affect other surfaces if they come into contact by mistake.
3
Rub the paint. Scrub the surface area with your soaked cloth.^{[11]XResearch source} Soak the paint first so the cleaning agent has time to be absorbed and loosen the paint’s bond. Then scrub more forcefully to remove the paint.^{[12]XExpert SourceJeff Baldwin
Residential PainterExpert Interview. 1 March 2021.}
- Due to the heat generated by light bulbs, the paint may have baked onto the surface, which may make rubbing ineffective.
- However, always start with cloths to see if that works, since harder tools may damage the metal, wood, or plastic.
4
Soak the paint with mineral oils if necessary. If rubbing with a cloth doesn’t work, use a utility knife to cut X’s in the paint. Apply as little pressure as possible to avoid nicking the fixture’s original surface. Then soak a new cleaning cloth with mineral oils and wipe it over the paint. Give it a half-hour or more to sit. Then try rubbing the paint off again. Repeat as needed.
- Depending on how thick the paint it is, this may require several soaks. Very thick coats may require a few days’ worth of repeated applications.

Part 3

Part 3 of 3:

Removing Paint from Glass

Download Article

Pour equal parts white vinegar and clean water into a pot. Stir to mix. Set the pot on an oven burner and turn the heat to medium-high. Bring the solution to a boil.^{[13]XResearch source}
First, put on a pair of heat-resistant cleaning gloves. Protect your hands from scalding, since you want to use the solution while it’s still hot. Immerse a portion of your cleaning cloth into the water. Squeeze out the excess to avoid dripping boiled water on yourself.^{[14]XResearch source}
Gently rub the cloth over the painted area, rewetting as necessary. Worry less about removing the paint at first and more about soaking it. Let the heated solution weaken the paint’s bond to the glass for easier removal.^{[15]XResearch source}
Rewet your cloth. Scrub the painted area a second time. Apply more pressure this time, but be careful not to break the glass. Scrub the paint clear of the glass as it continues to loosen. Rewet your cloth and repeat as needed.^{[16]XResearch source}
If any paint refuses to budge, wet the surface area again with your solution. Depending on how long you’ve been working, it may have cooled off by now, so reheat it if you need to. Wait a moment for the paint to soak it in. Then gently scrape the paint off with a utility knife. Work slowly and surely to avoid scratching the glass.^{[17]XResearch source}

Expert Q&A

Search

Add New Question

Question
How do you remove paint from vinyl?
Jeff Baldwin
Residential Painter
Jeff Baldwin is a Residential Painter and the Owner of Baldwin Custom Painting, based in San Francisco, CA. With two decades of painting experience, Jeff specializes in high-end residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and lead-safe certified services in residential painting, light commercial painting, and wood refinishing.
Jeff Baldwin
Residential Painter
Expert Answer
Spray some latex paint remover on the dried water-based paint. Leave it for a few minutes. Then scrub it with a cloth and warm water.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0
Question
What should I do to remove acrylic paint from various surfaces and clothing?
Jeff Baldwin
Residential Painter
Jeff Baldwin is a Residential Painter and the Owner of Baldwin Custom Painting, based in San Francisco, CA. With two decades of painting experience, Jeff specializes in high-end residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and lead-safe certified services in residential painting, light commercial painting, and wood refinishing.
Jeff Baldwin
Residential Painter
Expert Answer
You can use a latex paint remover and a small firm bristle brush to remove acrylic paint from various surfaces and clothing.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 1
Question
I have an electrified Moroccan lantern made of tin. The paint has come off in a few places. Could I use an electric stripper?
Community Answer
Yes, that can work. Along with what the article says, paint strippers are a good alternative.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Contact a professional electrician to remove light fixtures if you aren’t certain on how to do it.^{[18]XResearch source}
Thanks
Helpful0 Not Helpful0
Rubbing alcohol and acetone are both flammable.^{[19]XResearch source}
Thanks
Helpful0 Not Helpful0
Prolonged inhalation may cause dizziness, headaches, increased heart rate, and nausea.^{[20]XResearch source}
Thanks
Helpful0 Not Helpful0
Inhalation and direct contact with acetone may also cause acetone poisoning in rare cases.^{[21]XResearch source}
Thanks
Helpful0 Not Helpful0