Download ArticleSpike your hair to make it stand up and stay up
Download ArticleX
This article was co-authored by Kana Ishii. Kana Ishii is a Licensed Cosmetologist in the US and Japan, currently based in Beverly Hills. With more than 18 years of experience, she specializes in hair styling and coloring services such as balayage. Her work has been featured in Elle Girl Magazine, Cosmopolitan Magazine, and Modern Salon Magazine. She has also worked at major events, including The Academy Awards. Kana has won several hair competitions at some of the biggest beauty expos in the world such as the International Salon and Spa Expo and the Premier Orlando International Beauty Event.
There are 10 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 951,135 times.
Mohawks and Liberty Spikes are two versions of a classic punk hairstyle. They both start out as strip of hair running from the center of your forehead to the nape of your neck. The hair is then teased, spiked and hair sprayed into shape. This hairstyle is an attention-getter and not for the faint hearted, but it definitely makes a statement.
Things You Should Know
- Wash and blow dry your hair to remove tangles. If you're going for a genuine mohawk, trim the sides of your scalp with clippers.
- Lift the front section of your hair and spray it generously with hair spray. While still holding it up, blow dry it to set it in place. Repeat this in sections down your scalp.
- Style liberty spikes by tying your hair in 2–3 in (5.1–7.6 cm) sections. Then lift each section and spray it generously with hair spray, and blow dry it to set it.
Steps
Wash your hair. Hair spray will work better in clean hair, so it’s best to start the process fresh from the shower. Also, mohawks and liberty spikes can last for a few days, so you want to make sure the product from the last styling is completely gone.
Blow dry and remove tangles. You’ll want your hair to be light and fluffy for the actual styling, and blow drying will help create some volume. Make sure that your hair is free from any knots and tangles by running a comb through it as you blow dry.[1]Advertisement
Tease your hair if you need more volume. If your hair is still flat without enough body to support a hawk, run a comb backwards against the grain of your hair to give it a little more texture. Pushing more hair down to your scalp will also create a better foundation for the mohawk or spikes to rest on.[2]
Advertisement
Look for a good hair spray. While punks in the 80s used crazy products like glue and starch to keep their mohawks solid, there are plenty of sprays nowadays that won’t damage your hair. Use a hair spray with a tagline like “concrete”, “frozen”, or “solid”, or with a description of extreme styles with height.[3]
Get a gel for the tips of your spikes or mohawk. To make the tips of your spikes pointier and resistant to fraying, grab a gel as well. Again, look for "max hold" or "freezing" gels. You can also use super hard gel.[4]
Use gel only on the tips. Hairspray will form the basis of the hold for you style, but gel is only for the tips of your liberty spikes or outside edge of your mohawk. While gel gives a lot of hold to shorter styles, it's too heavy to use as a main product, and will cause your mohawk or liberty spikes to fall over.
Advertisement
Cut or trim your hair first. If you haven't already shaved the sides of your hair, you're going to need to do this for a real mohawk. You'll need clippers, the right size guard, and some rubber bands or masking tape.
Map out your hair. Visualize the strip that will be left behind and what will be shaved. Make sure the strip is wide enough to support the finished style, usually about 2-3 inches in width, centered on your head.- If your hair is shorter use tape to mark off where you want the mohawk: put the tape anywhere that you want hair to be left.
- If your hair is long, try using rubber bands. Use a comb to section off the hair that will make up your mohawk, then rubber band all of it into small ponytails or buns where the clippers can’t reach it.
Clip the exposed sides. Test the guard size to make sure it's the right length, then adjust if it's too long. Start shaving against the grain, starting with the front and moving to the back of your head. Shaving the front will be easy because you can see it as you shave, but for the back you’ll either need help, or a mirror positioned behind you.
Wash up. No one likes itchy hairs all over, and washing will give you a chance to get rid of any hairs that are still clinging to your scalp. Once you’re done, return to the mirror and check to see that your cuts are straight and everything looks good. Blow dry again, then get ready to style.
Lift the first section. Pick up a section in the middle of your head with your non-dominant hand. Keep holding the section and don’t move.
Spray the first section. Spray deep into the roots and throughout the top. Don’t be worried about using too much product: your hair will feel wet and sticky, but you're going to blow dry it soon. The bottom of your hair is going to hold the weight, so you want it to be extra stiff.
Lift and spray the next section. Move towards the back of your head and pick up the section of hair directly behind of the one standing up. Hold it with your non-dominant hand again, and make sure it lines up with the section in front of it. Hair spray it, again paying special attention to the roots of your hair.
Blow dry the section. Using the same technique as the last section of hair, blow dry the section of hair again. As it firms up, use your free hand to adjust the two sections to meet: you don’t want any gaps in your mohawk.
Work towards the back. Use the same technique again for the final sections of your mohawk: lifting, spraying and then blow drying. But while you can see the front in the mirror, the back is a little trickier to manage. Position a mirror behind you, or take frequent breaks as you’re styling to check out the hawk from the side.[7]
Finish all remaining sections. Use the same technique for each section of hair: lift, spray and blow dry. Don’t change your technique for any of the sections, even if your hands get tired from so much lifting. Take a break if you feel your arms getting fatigued.
Touch up the mohawk. When you’re finished, check the mohawk out from both sides and make any adjustments that you need to. If there are big gaps or open holes in your hair, carefully close the sections together, apply more hairspray, and blow dry again. Repeat for any remaining gaps. Use some gel to solidify and connect the outside edge of your mohawk if you want.
Advertisement
Section off your spikes. Once the hair is dry, you’ll want to decide how big you want your spikes to be: 2-3 inches is the norm. It’s really up to personal preference, but you’ll also want to make sure that the base of the spike can support the weight of the hair.[8] Using a comb and rubber bands, make a clean part to section off each spike and then rubber band it to keep it separated.
Tease the first spike. Take your comb and run it against the grain of your hair, from the top of the spike to the bottom. If you tease too much and you end up with a ball of hair near your scalp, twist it back into a spiked shape.[9]
Lift and spray the first teased spike. Undo the rubber band, then lift the section up in the direction that you want it to face. Some wearers of liberty spikes have the first spike pointing straight up from their forehead, while others prefer it to be angled downwards. Once you’ve decided which you prefer, hold the hair out with your non-dominant hand and apply hair spray with your dominant hand. Apply extra spray to the base, then spray up along the length of the spike.
Blow dry the spike. Set down the spray and pick up the blow dryer with your free hand. Blow dry along the length of the spike and straight into the base as well. When you feel the spray begin to set, after about 30 seconds, let go and continue drying for an extra few seconds.[10]
Tease the next spike. As with the first spike, comb your hair downwards to give it more texture and body, then sculpt it back up into the spiked shape you want. This will help it hold the spray better and have more structure on its own.
Lift and spray the next spike. Continue with the same steps all the way to the back of your hair. Unband the section, tease it, lift it, then spray and blow dry.
Use mirrors to see the back. Once you get to your final few spikes, it might be hard to see what you’re doing. Position a mirror behind your head so that it reflects the back of your head to your main mirror, or turn your head every once in a while to look as you spray.
Make adjustments. While it’s harder to adjust liberty spikes than a mohawk once you’re done, you’ll still be able to see which spikes are angled the wrong way. If they are, comb as much of the product out as you can, then lift it to the right angle. Re-apply the hair spray and blow dry again. Repeat your adjustments as necessary.
Style the tips. If you want the tips of your liberty spikes to be extra pointy, apply a bit of hair gel to the ends. This will keep them from separating and give your style a little more of an edge.[11]
Advertisement
Community Q&A
Search
- QuestionCan I wear my hair in liberty spikes if my hair is just past shoulder length?
Community AnswerThose are going to be some long spikes, but it's possible. - QuestionIs there an optimal length before styling?
Community AnswerIt is easiest if your hair has the ability to go down your forehead at least 2 inches. - QuestionCan a geek wear a mohawk?Community AnswerYes, certainly. If you're into punk music, then even better.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
SubmitAdvertisement
Video
Tips
- Ask for help if you need to, especially when cutting your hair. It's always hard to see the back and while mirrors can help, they're never as good as an extra set of eyes.Thanks
- If you have curly or very frizzy hair, use a flat iron to straighten your hair after blow drying and before applying product.Thanks
- If you're not quite ready for a Mohawk, try a faux-hawk.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Take care of your hair! Excessive styling and products can be rough on your hair, as can teasing. Make sure to wash the hairspray out as soon as you're in for the night, and use conditioner and shampoo for distressed or damaged hair. If your hair is bleached and dyed, try a special shampoo for that as well.Thanks
- Be prepared for the attention you're going to get. While some people may love your style, others may heckle or bother you while you're out and about.Thanks
Advertisement
Things You'll Need
- Fine tooth comb
- Hair clippers
- A blow dryer
- Good hairspray
- Hair rubber bands
- Hair glue (optional)
- Flat iron (optional)
References
- ↑ https://www.youtube.com/watch?v=GYJlVt2J764
- ↑ http://www.makeup.com/how-to-tease-hair
- ↑ http://www.hairfinder.com/hair/strong-holding-mohican.htm
- ↑ Kana Ishii. Licensed Cosmetologist. Expert Interview. 22 December 2021.
- ↑ Kana Ishii. Licensed Cosmetologist. Expert Interview. 22 December 2021.
- ↑ http://www.gothpunk.com/howtos/care-feeding-mohawks.html
- ↑ https://www.youtube.com/watch?v=4v2913q04Sc
- ↑ http://coolmenshair.com/2011/07/benji-madden-liberty-spikes-hairstyle.html
- ↑ https://www.youtube.com/watch?v=7YwQbTBCBKs
About This Article
Licensed Cosmetologist
This article was co-authored by Kana Ishii. Kana Ishii is a Licensed Cosmetologist in the US and Japan, currently based in Beverly Hills. With more than 18 years of experience, she specializes in hair styling and coloring services such as balayage. Her work has been featured in Elle Girl Magazine, Cosmopolitan Magazine, and Modern Salon Magazine. She has also worked at major events, including The Academy Awards. Kana has won several hair competitions at some of the biggest beauty expos in the world such as the International Salon and Spa Expo and the Premier Orlando International Beauty Event. This article has been viewed 951,135 times.
Co-authors: 72
Updated: August 23, 2023
Views: 951,135
Categories: Featured Articles | Hairstyles
Article SummaryX
Mohawks and Liberty Spikes are classic punk hairstyles that both start as a strip of hair running from the center of your forehead to the nape of your neck. Since hairspray works best in clean hair, start your Mohawk by washing your hair. Next, blow-dry your hair to make it light and fluffy for the actual styling. If your hair is falling a bit flat, tease it by running a comb backward against the grain to give it more texture and volume. Pick up a section of hair from the middle of your head and spray it with a strong-hold hairspray. Then, immediately blow dry it for a minute or so to stiffen your spike. Continue to lift, spray, and blowdry each section as you move back toward the nape of your neck. To learn how to style your Liberty Spikes, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 951,135 times.
Reader Success Stories
"Excellent detailed instructions, including how to pick up a blow dryer. "
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
Advertisement
