How to Prune Succulents

Succulents are some of the easiest plants to prune and generally don't require too much maintenance. The extent of your pruning will usually be light trimming to keep them healthy and in an appealing shape. For sprawling plants or those that are starting to get dead leaves, take a moment to familiarize yourself with the best pruning techniques and tips.

Part 1

Part 1 of 3:

Maintaining Health and Size

Download Article

1
Pull off older leaves regularly. You will typically find dead leaves on the lower parts of your succulents. Remove these leaves gently with your fingers to help your plant grow. If you leave them on the stem for too long, the soil below the plant will take longer to dry, which can lead to rot.
- Keeping your plant free from dead leaves can also promote new growth on the stem (you might even notice some when you pull off the dead leaves).
2
Prune your succulents at the beginning of the growing season. Although succulents can be pruned at anytime, the beginning of the growing season is ideal due to the high level of growth. Near the end of the season, you probably won't see new growth as fast. Succulent growth periods vary, so be sure to double-check the growing season for your type.
- In general, flowering varieties should be bloomed after they bloom, or during the winter when they are dormant.
- Take a look at dormancies here: https://www.succulentsandsunshine.com/succulent-dormancy-table/
Advertisement
3
Avoid watering your succulents 1 to 2 days after pruning to allow growth. You need to give the plants and roots time to adjust and heal following pruning. At least 1 day without watering is ideal. When you do water your plants, give them enough time dry afterwards.
- With the right pruning and a lot of indirect sunlight, you will only need to prune your succulents every few months to a year.
- Overwatering succulents can lead to root rot.

Part 2

Part 2 of 3:

Creating a Desirable Shape

Download Article

1
Maintain the natural form of your succulents. How you do this depends on the succulent in question. For example, don't remove bloom spikes from yuccas, nolinas, hesperaloes, and dasylirions until blooming is complete. For agave, never remove their spikes until after blooming (or when you notice agave weevils, a type of beetle from the Curculionoidea superfamily). And cacti like those from the Opuntia/Cylindropuntia genus should be pruned at the point where the pads connect.
- Removing armament, such as spikes or spines, is recommended. Although these are natural defenses from other animals in the wild, they can be hazards if they are located close to driveways, sidewalks, and other high-traffic areas.
2
Cut individual branches to shape your succulents. This allows you to gradually shape your trees the way that you want. Chopping your plants to the same height is called "topping," and is severely damaging to the tree's health. This is often done to plants that outgrow the space they're in, although this is less problematic with succulents given their manageable size.^{[1]XResearch source}
- If any of your plants are outgrowing their space, consider a more suitable plant for the location.
3
Locate leafs or nodes that are pointing in the direction of desired growth. Cut the stems right above the node within ¹⁄₂ inch (1.3 cm) at a 45-degree angle. The new growth should extend into the direction of the leaf or node where it was removed.^{[2]XResearch source}
- Remove a maximum of a 1/3 of the stem length for each leaf. Vary the lengths to give your plant more variation.
- This technique works best for multi-branched, long-stemmed succulents like crassula and echeveria.
4
Remove elongated plants that are tilted to one side and repot them. Since these are trouble for the natural shape of your plant, they should be pruned down to a small size that doesn't lead to tilting and grown in new soil. The plants should be tucked tightly into the new soil and spaced apart by about 1 inch (2.5 cm) to allow room for growth.^{[3]XResearch source}
- Map out the new space before repotting so that you can accommodate each plant.^{[4]XResearch source}

Part 3

Part 3 of 3:

Using Plant-Specific Pruning Techniques

Download Article

1
Cut off damaged leaves from yuccas and nolinas. Similar to agaves, these kinds of succulents should only be pruned for dead leaves, as well as armament located on the ends of their leaves. Never remove green leaves, as they are necessary for food production, as well as the general growth and health of the plants.
- Leave dead leaves on the trunk of taller yuccas and nolinas to protect from water loss during the summer and low temperatures during the winter.
2
Remove only damaged leaves from dasylirions. These succulents have similar growth patterns as yuccas and nolinas. Cutting off dead leaves is not necessary, but good for improving appearance. Otherwise, prune minimally and never cut off green leaves.
- Don't sculpt these plants into patterns, such as spirals it's unnatural—and can hinder growth.
3
Cut off spent flower stems and dead foliage from hesperaloes. As one of the easiest succulents to maintain, focus on keeping fresh, growing heads and stems. These plants require minimal pruning, so don't trim them just for the sake of it.
- Never remove flower spikes before they have bloomed (this means never pruning them into squares or balls).
4
Trim ocotillo stems that have died or become too tall. Focus on individual stems that are dead or unruly by cutting them back to their base and let remaining stems continue growing to produce flowers. Never cut them off at the top, as it will stunt plant growth and lead to unnatural form and height.
- Cutting ocotillos too high leads to thin and irregular branches as opposed to sturdy ones.
5
Trim cacti at the joints where the pads connect. Never trim parts of the pads off—always remove full pads. As a general rule, it should always be easy for viewers to determine where the plant was pruned recently.
- Remove stems that are broken or diseased.
- The small cacti characterized by columns, such as Cleistocactus, Echinocereus, and Stenocereus, should always be pruned at ground level—never the top. This ruins their natural shape and leaves numerous cuts that are susceptible to disease.
- Never use cacti as hedges, as their armament can cause harm.
6
Remove spines at the end of agave leaves. Cut the tips from the end of the leaves as they unfold. Pruning spines can cause browning on the tip of some leaves, but it's nothing to worry about. Focus on pruning these succulents after they bloom, and only remove the whole leaves if they are dying or dead.
- Planting agave without any armament on their leaves and planting them away from high-traffic areas can eliminate the need for pruning.
- If agaves become infested with weevils, the whole plant will need to be removed.

Expert Q&A

Search

Add New Question

Question
Can succulents outgrow containers?
Chai Saechao
Plant Specialist
Chai Saechao is the Founder and Owner of Plant Therapy, an indoor-plant store founded in 2018 based in San Francisco, California. As a self-described plant doctor, he believes in the therapeutic power of plants, hoping to keep sharing his love of plants with anyone willing to listen and learn.
Chai Saechao
Plant Specialist
Expert Answer
Yes! If you have a succulent in a terrarium, I recommend trimming it regularly. Otherwise, it could quickly outgrow its environment.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 2
Question
How can I prune an overgrown Opuntia Robusta (Prickly Pear cactus)?
Chris
Top Answerer
It's not necessary to prune this type of cactus. However, if it's becoming overgrown, you can cut individual pads off at the joint, where they meet the next pad. These pads can then be propagated into new cacti.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 1
Question
How do I prune euphorbia?
Chris
Top Answerer
Pruning euphorbia is a very easy task, as they only need a light pruning once a year. After the flowers have bloomed and turned brown, simply cut the flowering stem down to the first ring of leaves. Please be sure to wear gloves while handling euphorbia, as it produces a sap that is irritating to the skin and eyes.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Things You'll Need

Garden pruners
Gardening gloves
Long-handle tweezers
- Cactus catch-all tray

Tips

Purchase pruning shears or bonsai scissors. Bonsai scissors are a specific type of scissor that are light weight and sharp, which makes them perfect for cutting succulents. Always make sure to clean them before using them—dirty scissors can lead to diseases.
Thanks
Helpful0 Not Helpful1
Wear gloves when pruning to stay clean. Some succulents, including Euphorbia, create a sap that can irritate you skin. Always wear gloves to protect your skin when pruning these succulents. Or, just to be safe, wear gloves when pruning any of your plants.
Thanks
Helpful0 Not Helpful0
Gardening gloves can be purchased from local garden and home hardware stores.
Thanks
Helpful0 Not Helpful0