How to Prepare Exterior Wood for Painting

Getting an outdoor wood surface ready for a fresh coat of paint isn’t difficult, but it does require a little prep work to ensure that the new paint has a smooth, stable surface to cling to. Your first step will be to give the entire surface a thorough cleaning to remove the stubborn dirt and grime that’s built up over the years. Next, move on to patching holes and cracks with a strong wood filler and scrape flaking paint to clear the way for the new coat. Finish by priming the surface with a resilient exterior primer and using caulk to seal any openings that could leave the wood vulnerable to the elements.

Things You Should Know

Cover openings with plastic, thoroughly wash the wood, and patch holes (including nail holes) with wood filler.
To prepare wood for paint, scrape off flaking paint, treat knots with the necessary specialized primers, sand the entire surface, and wipe the surface clean.
Brush on a coat of latex-based primer, allow the primer to dry completely for 2-6 hours, and if there are gaps and cracks, seal them with caulk.

Part 1

Part 1 of 3:

Cleaning and Repairing the Wood

Download Article

1
Mask any doors, windows, or other openings with plastic. Before you begin scrubbing, scraping, and sanding, take a few minutes to make sure your work area is protected. Cut sheet plastic to fit over each opening and secure the edges using painters tape. Not only will this keep the areas you don’t want to paint covered, it will also help protect more delicate fixtures from damage.^{[1]XResearch source}
- It may be a good idea to lay some sheeting at the base of the structure as well to catch wood shavings or flecks of paint that come loose during the project.
2
Clean the wood surface thoroughly. Use a long-handled scrubber brush and a mild detergent to gently scrub away accumulated dirt, grime, mold, and other residue. When you’re satisfied with the wood’s appearance, rinse the exterior from top to bottom with a garden hose. Give the surface a full day to dry before moving on.^{[2]XResearch source}
- Whatever you're painting has to be clean of any grease, dirt, or debris before you can paint it. Remember to check for things like vine roots that might be growing along the surface, as well.^{[3]XExpert SourceAndres Matheu
  Commercial PainterExpert Interview. 28 July 2020.}
- Pressure washing may be a more efficient option for renewing larger surfaces, especially areas like fences that may have algae, moss, or mildew growth.^{[4]XExpert SourceAndres Matheu
  Commercial PainterExpert Interview. 28 July 2020.} Pressure washers are typically available to rent at hardware stores and home improvement centers.^{[5]XResearch source}
- Avoid using stiff brushes or scrubbers like steel wool. It’s possible for these tools to leave behind permanent scratches in softer woods.
Advertisement
3
Patch large holes and gouges with wood filler. Apply the filler material using the tip of a putty knife or hand trowel, then go over it with the flat edge to smooth it. Smaller spots can be treated the same way, or you can purchase an exterior spackling compound, which won’t require any additional mixing. For most basic applications, the wood filler will dry in a few hours.^{[6]XResearch source}
- Two-part resin systems tend to stick to exterior wood better than ordinary fillers.
- Repairing damaged and uneven areas to ensure that the surface you’re painting is uniform and structurally sound.
4
Fill visible nail holes. While you’ve got your wood filler handy, spread a small glob into any recessed nail holes you come across, then carefully blend the material into the surrounding surface. Bringing the holes to level will keep them from being visible under the new paint.^{[7]XResearch source}
- If there are any nails sticking out of the exterior, remove them (if they’re not necessary) or drive them ¹⁄₄ inch (0.64 cm) into the face of the wood to get them out of the way before filling the holes.^{[8]XResearch source}

Part 2

Part 2 of 3:

Preparing the Surface to Accept Fresh Paint

Download Article

1
Scrape off flaking paint. If you’re going to be refinishing a surface that’s been painted previously, it will first be necessary to take off any worn patches of paint that might interfere with the new coat. Run a hooked scraper along the places where the old paint is peeling to shave it away. Make sure you keep your strokes moving with the grain—otherwise, you run the risk of splintering the wood.
- Continue scraping until there are no protrusions on the face of the exterior.
- The sharper the scraper, the easier it will be to remove the failing paint. For best results, equip yourself with a scraper that has a hardened steel or carbide edge.^{[9]XResearch source}
2
Sand down the edges of bare spots. After scraping, you’ll notice that the remaining paint forms a ridge around the exposed wood. You can do away with these imperfections easily using a handheld power sander. Start with a low-grit sandpaper of around 60-grit or so to grind down sharper edges. Then, switch to a high-grit paper (100-grit or higher) and smooth the paint down to the underlying wood.^{[10]XResearch source}
- It’s not necessary to sand the contours all the way down to the wood—just “feather” them lightly so that the edges gradually disappear.
- If ignored, old paint lines can create seams under the new topcoat, which can become prone to cracking as a result.
3
Treat exposed wood knots separately with a preliminary primer. Certain types of wood, like pine and cedar, give off sappy resins that can bleed through thin and light-colored paints. These spots should be brushed with a special resin-blocking primer to prevent discoloration. Apply the primer over any sections of the wood where the grain looks particularly dark or wet.^{[11]XResearch source}
- Even with a resin-blocking primer, it’s advisable to use 2-3 coats to conceal potential bleeding when it comes time to paint the surface.
4
Sand the entire surface. Sweep an orbit sander over the wood in wide circular strokes. The light scuffing action will produce a more textured surface that promotes proper paint adhesion.^{[12]XResearch source}
- Be sure to hit corners, recesses, molding, and any other features you intend to paint, as well.
- Be sure to sand away any wood splints, as well.^{[13]XExpert SourceAndres Matheu
  Commercial PainterExpert Interview. 28 July 2020.}
- It’s not necessary to remove the old paint. A thorough sanding should rough up the exterior enough to help fresh coats stick.
5
Wipe the surface clean. Sweep the wood with a stiff-bristled brush or dry cloth to remove the dust generated by sanding. Blow sharply to force lingering dust out of narrow cracks and holes. The surface should be totally free of debris when you're finished.^{[14]XResearch source}
- A shop vacuum with a brush attachment might help you collect more dust from broad areas.
- Drag your finger along the wood to make sure no traces of dust remain. Paint has a hard time adhering to surfaces that are coated with lots of fine particles.

Part 3

Part 3 of 3:

Priming the Wood Surface

Download Article

1
Choose a latex-based primer designed for exterior use. These products hold up better to the sort of heat, moisture, rubbing, and swelling that outdoor wood surfaces are often subjected to. They have the ability to flex a little, which makes them less likely to crack than paints that dry into a hard shell. As a result, your paint job will look better and last longer.^{[15]XResearch source}
- You should be able to cover about 400 square feet (about 37 square meters) with a single gallon of primer.
- Make sure it's between 50–90 °F (10–32 °C) outside when you apply the primer. If it's too hot or too cold, it may not dry with the right consistency.^{[16]XResearch source}
2
Brush on a coat of primer. A roller will make it easier to spread the primer over broader areas. For smaller surfaces and tricky structures like railings, a handheld brush will offer the greatest amount of control. Apply the primer in an even layer thick enough to completely conceal the wood grain underneath.^{[17]XResearch source}
- Use the tip of the brush to work the primer deeper into dips and divots in rich wood grain.
- Start at the top of the structure and work your way down. That way, any drips will be erased as you go back over them.
3
Touch up missed spots. When you’re done priming, inspect the surface for any spots, seams, or bare patches you may have overlooked. A few strokes with a handheld brush will make them disappear.
- Paint may peel or wear away faster in places without a primer foundation.
4
Allow the primer to dry completely. Most primers will take from 2 to 6 hours to dry to the touch. After about 12 hours, the primer will have set enough to paint over with a followup coat, if desired. To minimize the chances of smudges and transfer, avoid handling the wet primer during this time.^{[18]XResearch source}
- Leave the primer to dry overnight before applying your first coat of paint to ensure that it has time to absorb into the wood.
5
Use caulk to fill any visible openings. Once the primer is dry, walk around the structure and look for any gaps or cracks that might cause an issue down the line. Seal each opening using a caulk gun loaded with silicone sealant. The caulk will harden within an hour, keeping the structure off-limits from rain, mold, bugs, and drafts.^{[19]XResearch source}
- The caulk you use should be paintable, able to withstand both high and low temperatures, and suitable for the materials it’s binding.^{[20]XResearch source}
- Pay close attention to potential problem areas, like the spaces beneath board laps, around window frames, and in-between trim and siding.

Expert Q&A

Search

Add New Question

Question
Do I need to sand before painting exterior wood?
Andres Matheu
Commercial Painter
Andres Matheu is the Owner of Hömm Certified Painting Systems, an Interior and Exterior Residential painting business based in the Washington, DC Metro area. Andres specializes in interior and exterior residential painting, color consultations, cabinet refinishing, wallpaper removal, and epoxy flooring among other services. An EPA Lead-safe Certified Firm, Hömm Certified Painting Systems has been awarded the Best of Houzz 2019 Service, Angie's List Super Service Award 2019, and Northern Virginia Magazine's 2018 Best Home Experts (painters) award.
Andres Matheu
Commercial Painter
Expert Answer
Yes. First, clean the surface thoroughly. It may help to use a power washer, especially if you have accumulated algae, moss, or mildew. Then, sand the entire surface a little to make sure there are no wood splints. That will also give the wood a little texture for the paint to adhere to.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 4

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Schedule the painting and priming phases of your project for a stretch of days with clear, dry conditions to keep humidity from causing delays.
Thanks
Helpful2 Not Helpful0
Trisodium phosphate (TSP) can be useful for dissolving stuck-on gunk when a regular hose down or power washing isn’t enough to get it done.
Thanks
Helpful1 Not Helpful2
If you live in an area with high year-round humidity, try adding about 2 ounces of mildewcide product to every gallon of paint you use, including the primer. The additive will make it much harder for mold-causing bacteria to grow on the newly-painted surface.
Thanks
Helpful2 Not Helpful0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Attempting to sand, patch, or prime wood while it’s still damp could prevent proper adhesion or even cause unintended structural damage.
Thanks
Helpful2 Not Helpful2
If the structure you’re working on was last touched up before 1978, it’s possible that the paint contains lead. In this case, it will be safest to remove every last trace of the old paint. Pick up a home lead-testing kit to determine whether it will be necessary to completely strip the surface prior to layering on a fresh coat.
Thanks
Helpful2 Not Helpful2