How to Plasti Dip Your Car and Car Accessories

In this guide, you will learn a step-by-step process to add a different look to your car and car accessories using plasti dip. Plasti dip is a substance utilized for wheels and cars to protect their original surfaces during the winter season. Plasti dip is a high quality product that is resistant to sun fading, winter ice, cold, and salt. It is also a durable yet removable substance that will peel off after a long period of time. Most importantly, anyone can use this product to display a clean and matte look for their car while completely remaining free of harm.

Steps

Download Article

Find an area that is large enough to house the car and is very well ventilated. A good suggested area would be an open garage,^{[1]XResearch source} but if that is not possible, outside under in the shade is a good idea. Avoid direct sunlight.
Gather the materials needed listed in the Things you’ll need section.
Advertisement
Before applying any type of plasti dip to the car, it must be clean. The plasti dip is an overlay so it will form a separate layer on top of any surface as well as dirt, raised surfaces, or bird poop found on the car. In other words, you want a clean surface to work with.^{[2]XTrustworthy SourceConsumer ReportsNonprofit organization dedicated to consumer advocacy and product testingGo to source}
After cleaning the area, dry it with a cloth of your choice. Try using a Meguiar's Water Magnet Drying Towel, but you can use any terry towel. Avoid using shirts with designs or logos and paper towels.These will create scratches.
^{[3]XResearch source} Although plasti dip is already easy to remove, you would want to prepare the area. Preparing the area you wish to apply the plasti dip reduces the hassle of removing the over spray later. Using painters tape and newspapers, cover windows and any designated area that you do not want to get plasti dip on.
As with any spray-on material, it will need vigorous shaking. Shake the can for one minute.
Painting in sections will allow for the fastest time (6-8 hours) through this process. For example, add a first layer to the hood, while the hood is drying add a first layer to the roof, etc. You do not need to start on the hood. You may start wherever you like. Important note! do not touch Plasti dip on the car at any point in time during the process as to avoid any mis-painted spots. Plasti dip is safe to touch after curing. It is recommended to wear a mask and eye protection.
^{[4]XResearch source} It is very important that this layer is a light dusting because the first layer is the bonding layer meaning it will be a 50 - 60% transparency. This will allow the rest of the layers to bond and stick to the paint. Spray in a clean sweeping motion, making sure to hold the can 6–8 inches (15.2–20.3 cm) away from the area. Allow plasti dip to dry 15-30 minutes depending on climate, before adding the next layer.
Increasing the layers on top of the first will only increase the durability of the plasti dip. The average number of layers is 4-5. Any additional amount of layers is up to personal preference. The layers after the first will be light layers in which you will fully coat the area. Spray in a clean sweeping motion, making sure to hold the can 6–8 inches (15.2–20.3 cm) away from the area. Remember Allow 15-30 minutes of drying time in between each layer.
^{[5]XResearch source} After the final layer is applied, immediately remove any painter's Tape or newspaper that may have been used, from the immediate area, and toss in the trash. Remove before plasti dip dries.
At this point the plasti dip will take four hours to fully cure. At ALL costs, avoid any form of liquid, or any substance that may cause damage to the area. It may ruin the curing process.
^{[6]XResearch source} For car accessories such as emblems and the grille, repeat steps 1 - 11. Spray onto emblems or grille only. important note - if the car is currently in the curing process, wait until car is fully cured before preparing the area. Spraying the car accessories can be done while painting the main body of the car.
^{[7]XResearch source} The cleanest way to apply plasti dip your rims is to remove the wheels completely from the car. Follow respective car manual on how to remove entire wheel from car. Repeat steps 1-11 for the rims. It is completely optional to cover the rubber of the wheel as plasti dip is easily removable. But covering the rubber ensures easy clean up. (Wranglerforum.com)

Community Q&A

Search

Add New Question

Question
How do I remove it from areas that got overspray?
Community Answer
You can either peel it (if it is thick enough) or rub vigorously with your finger or a towel, and it will wipe right off.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 10
Question
How many bottles do I need for 4 rims?
Community Answer
3 bottles of dupli•color custom removable coating (essentially plasti-dip) is a safe amount to go with. This is enough to do wheels, hubcaps, and any emblems you want.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 4
Question
Do I need to sand any of the materials I'm painting when plasti dipping my car and car accessories?
Community Answer
Obviously not! The purpose of applying a layer of plasti dip is to change the appearance of the object without damaging the current state. You should at all times be able to revert to the old (original) look by peeling off the layer of PD. Sanding before applying would only ruin the original paint. Just make certain - as explained - that the surface is clean and dry.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 1

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Shake cans really well before spraying. If not it will spray clear.
Thanks
Helpful1 Not Helpful0
It is recommended to use a professional spray gun from your local hardware and appliance store as well as a bucket of plasti dip instead of cans. But it can be done with the can and a regular spray trigger.
Thanks
Helpful1 Not Helpful0
Do not try to do this fast, because you will mess up.
Thanks
Helpful0 Not Helpful1

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Do not puncture or incinerate container.
Thanks
Helpful1 Not Helpful0
Extremely flammable harmful vapor. Irritates eyes, skin and respiratory tract.
Thanks
Helpful0 Not Helpful1
Wash hands after using.
Thanks
Helpful0 Not Helpful0
Keep away from heat sources, open flame, and sparks.
Thanks
Helpful0 Not Helpful0
Contents under pressure. “If ingested contact physician or Poison Control immediately. If inhaled remove to fresh air. Administer Oxygen or Artificial Respiration if necessary. If contact with: Flush with large amounts of water. If irritation persists, contact Physician”.
Thanks
Helpful0 Not Helpful0
Avoid skin and eye contact. Overexposure may cause numbness in extremities, which persist for some period of time and may be permanent.
Thanks
Helpful0 Not Helpful0
Do not store can above 120 °F (49 °C).
Thanks
Helpful0 Not Helpful0