How to Pair and Set Up a Smart Watch with an Android

Download Article

Using the Galaxy Wearable App

|

Using the WearOS App

|

Pairing Other Watches

|

Q&A

This How.com.vn teaches you how to pair different types of smart watches to your Android phone or tablet. If you're using a WearOS compatible watch, you can install the WearOS app from the Play Store and let it guide you through setup. Samsung Galaxy Watch owners can use the Galaxy Wearable app, also available from the Play Store, for both pairing and managing. If you're using a different watch manufacturer, you can usually find its app available for free at the Play Store and use it to pair, but if that doesn't work, you can pair it in your Android's settings.

Method 1

Method 1 of 3:

Using the Galaxy Wearable App

Download Article

Charge your Samsung smart watch and power it on. The watch should be fully charged before you begin the setup process.
2
Install the Galaxy Wearable app on your phone or tablet. You can download it from the Google Play Store.^{[1]XResearch source}
- To download the app, open the Play Store app in the app drawer, search galaxy wearable, then tap INSTALL once you find it.
Advertisement
Once it's installed you'll see its orange icon with the word "wear" in white letters in the app drawer. If you're still in the Play Store, just tap Open to launch it now.
One of these options will appear at the bottom of the screen.
If prompted to give the app permission, tap Allow. The app will display a code, as will your Samsung Smart Watch.
6
Make sure the codes match and tap Pair or Connect. One of these two options will appear in the app.
- If your Android is not a Samsung model, you'll be prompted to install an additional app. Follow the on-screen instructions to complete the setup process.
The remaining options will vary depending on the watch model and the services you want to enable. Once you're finished with the process, your smart watch will be ready to use with your Android.

Method 2

Method 2 of 3:

Using the WearOS App

Download Article

1
Install the WearOS app from the Play Store
. You'll find the Play Store app in your Android's app drawer.^{[2]XResearch source}
- Many smart watch manufacturers, including Fossil, TicWatch, Armani, and Michael Kors, use Google's WearOS operating system. Check your watch's packaging and/or manual if you're not sure whether it's running WearOS.
- To download the app, search for wearos in the Play Store app, and then tap INSTALL once you find it.
After a few seconds, a message will appear on the screen.
A link to the full terms will appear on the screen. Continuing with this method confirms that you agree to these terms.
Now that it's installed, you'll find its multicolored "W" icon in the app drawer. If you're still in the Play Store, you can just tap OPEN to launch it.
It's the blue button at the bottom-right corner of the screen.
You can deny sharing your data if you wish. Once you make a selection, the app will scan for your watch.
It may take a few moments for the watch to show up. This will bring up a code on both the Android and the watch.
10
Verify that the codes match and tap Pair. You'll do this action on the Android.
- The codes on both the watch and the Android should be identical. If they aren't, restart the watch and try again.
Once completed, your watch will be ready to use with your Android.

Method 3

Method 3 of 3:

Pairing Other Watches

Download Article

1
Install your app's watch on your Android. Most smart watch manufacturers provide a free app that will walk you through the setup process. You will find information about the app in your watch's packaging, on the manufacturer's website, or by searching for the watch name on the Google Play Store.
- Once you download the app, launch it and try to follow its on-screen instructions to pair your watch. If there's no feature to pair within the app, continue with this method.
2
Enable Bluetooth on your Android. If there is no specific app for your watch model, you should be able to pair it via your Bluetooth settings. To enable Bluetooth on your Android:^{[3]XResearch source}
- Open the Settings app, which is the gear icon in your app drawer.
- Tap Connections or Bluetooth.
- Toggle the Bluetooth switch to the On (green) position.
- Select the option to make your Android discoverable. It should be near the switch.
Depending on the watch model, it may be discoverable as soon as you turn it on. Other models may require you to tap a Get Started option or something similar to enter pairing mode.
If it doesn't automatically display your watch's name try refreshing the list or tapping Search for devices. A code will appear on the Android's screen, as well as on the smart watch.
5
Verify that the codes match and tap PAIR on the Android. You may also have to tap a checkmark or other option on the watch face to confirm.
- Check that this code and that on your smartwatch matches, then tap the checkmark on your smartwatch to confirm. Tap “Pair” on your phone to connect the two devices.
Now that the watch is paired, you can use the app provided by the watch manufacturer to set up its features and functions.

Community Q&A

Search

Add New Question

Question
How do I set my smartwatch?
Community Answer
This will depend on the exact model of the smartwatch you bought, so read the instructions that came with it. If you can't find or don't have them, look for your smartwatch model online to find the manual.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 18