How to Melt a Soap Bar

There are so many things you can do with melted soap! It’s a great way to save money on liquid hand soaps and other toiletries. By melting down scraps of soap that would otherwise be thrown away, you can make your own cheap hand soap or body wash. With a few simple steps, you can have melted soap to use for any project you have in mind.

Method 1

Method 1 of 3:

Liquefying Soap Scraps on the Stove

Download Article

These should be equal to a weight of 4 ounces, which is the weight of an average bar of soap. You can also use an entire bar of soap, if you prefer. Any bar soap, whether whole or in pieces or scraps, will work. ^{[1]XResearch source}
2
Shred the soap using a cheese grater. A regular, four-sided standing metal cheese grater works perfectly, but a smaller hand-held cheese grater would also do the trick. The idea is to reduce larger pieces into smaller shreds that will be easier to melt. ^{[2]XResearch source}
- A citrus zester or a potato peeler could also be used if you don’t have a cheese grater on hand.
Advertisement
3
Heat the soap pieces in a pot with 8-9 cups of water. In a large saucepan over low to medium heat, heat the soap pieces until melted. If you’re planning on making a creamy body wash instead of a liquid hand soap, use less water. The more water you use, the thinner the end product will be. ^{[3]XResearch source}
- If you’re concerned about reusing your saucepan for cooking and possibly contaminating food with soap ingredients, you might want to designate an old pot just for melting soap, or pick up a cheap, used one at a thrift store.
4
Remove the soap from the stove. Let it sit covered for 12-24 hours. The soap will thicken overnight. If the soap is not at the consistency you prefer, you can reheat it and make adjustments as necessary. ^{[4]XResearch source}
- If you’re still not sure of the consistency, use a whisk or a blender to mix it together further.

Method 2

Method 2 of 3:

Softening Soap in the Microwave

Download Article

1
Cut your soap base into cubes and put them into a glass bowl. Glassware is better than plasticware, as plastic may leech out any fragrance oil in your soap.
- If you’re planning on making bar soaps as your end project, weigh out the amount of soap in advance so that it matches the mold you’ll be using.
- If you’re unsure of how much your mold holds, fill it with water and then dump it into a measuring cup.
- It’s best to use ½ to 1 ounce more than what the mold holds. ^{[5]XResearch source}
2
Cover the glass bowl with plastic wrap and put it in the microwave. Covering the bowl helps to keep the moisture sealed inside. Heat your soap at 30 second intervals.
- It’s important not to overheat your soap base as it could ruin the integrity of the soap.
Check for clumps of soap. If you find any, recover the soap and microwave for another 30 seconds.

Method 3

Method 3 of 3:

Melting Soap Using Boiling Water

Download Article

1
Use a cheese grater to shred the soap. You can also use a potato peeler. Reducing large pieces of soap to a smaller size will make it easier to melt. ^{[6]XResearch source}
- Alternately, if you have bars of soap, you can cut them into cubes. ^{[7]XResearch source}
A double boiler works well for this, if you have one. Otherwise, you can use a medium saucepan. ^{[8]XResearch source}
3
Put the soap shreds or cubes into a glass bowl. Place the bowl on top of the double boiler or saucepan. The heat from the boiling water will gradually begin to melt the soap.
- If you’re using goat milk soap, adding 1 tablespoon (14.8 ml) of water for every 2 cups of soap will help the soap scraps or pieces bind to each other. ^{[9]XResearch source}
4
Stir the soap every few minutes. Stir frequently enough that the pieces begin to melt into each other. However, stirring too frequently or too hard could cause bubbles. The best thing to do is just stir the soap every couple of minutes or so.
- If the soap shreds or pieces are not melting into each other, add 1 additional tablespoon of water at a time, up to 3 teaspoons. ^{[10]XResearch source}
Note that the soap is unlikely to be completely, perfectly smooth. Some texture is expected. ^{[11]XResearch source}

Community Q&A

Search

Add New Question

Question
Can you melt Dove soap?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
You can melt down Dove soap bars, but they behave differently from other types of bar soap because of the high moisturizer content. If you want to use the liquification method (putting shavings of soap directly into water), then you need to reduce the amount of water or increase the amount of soap to avoid getting a very watery result.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 23
Question
Can you melt down a bar of soap and then remold it?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
Yes, you can pour the melted soap into a silicone mold and allow it to cool and harden into a new bar. If you like, stir in some new ingredients, such as a few drops of your favorite essential oil, some mica or biodegradable glitter for shimmer, or oatmeal for exfoliation.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 33
Question
Is it dangerous to microwave soap?
How.com.vn Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
How.com.vn Staff Editor
Staff Answer
No, it’s not dangerous, but it could leave your microwave smelling soapy! Some types of soap expand in the microwave, so take care to cut them into small pieces and keep them covered.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 8 Helpful 23