Download ArticleDownload ArticleThis article was co-authored by Eric Shipe. Eric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 324,827 times.
These days, toilet seats come in standard sizes, but measuring your seat before buying a replacement is still wise. Start by measuring the seat from back to front. Buy a standard round seat if the length is around 16 in (41 cm). If it's around 18 in (46 cm) long, go with an elongated seat. Things get a little more complicated if your toilet is old or if you’re investing in a specialty seat. However, regardless of your situation, you should have no trouble measuring your seat and choosing the best replacement!
Steps
Measure the seat’s length from the bolts to the front. Hold one end of a measuring tape to the bolts at the back of the seat that secure it to the bowl. Draw the other end of the tape to the very tip of the front of the bowl, then note the seat’s length.[1] Be sure to take your measurement down the center of the bowl.[2]- For an accurate measurement, hold the measuring tape in line with the centers of the bolts. If necessary, snap up the plastic covers so you can see the bolts. If you can’t pry up the covers with your fingers, use a flat-head screwdriver.[3]
- Picture the toilet seat as a clock. Measure the length from the center of each side, or from 12 o’clock to 6 o’clock.
Tip: Write down your measurements and take them with you to the hardware store, especially if you have an old or non-standard toilet.
Find the distance between the bolts at the back of the seat. If flaps cover the bolts and you haven’t lifted them, pry them up with your fingers or a flat-head screwdriver. Then measure the bolt spread, or the length between the centers of the mounting bolts.[4]- In the U.S., the standard bolt spread is 5 1⁄2 in (14 cm), but there are a few models with spreads of 7 to 10 in (18 to 25 cm). If your toilet’s dimensions aren’t standard, you may need to order a seat directly from the manufacturer.[5]
- In Europe, the standard bolt spread is approximately 6 to 6 1⁄2 in (15 to 17 cm).
Advertisement
Take the seat’s width measurement. Measure the width to find the best-fitting replacement seat. Hold one end of the measuring tape at the center of the seat’s left side, then bring the other end to the right side. Keep the tape centered, and measure the length between the outer edges of the seats’ sides.[6]- Remember to measure from the centers of the sides, or from 9 o’clock to 3 o’clock.
- While sizes are standardized, there may be slight variations among brands. If you’re replacing the seat, measuring the width can help you find the closest match.
Find the length between the 2 bolt holes. Hold the measuring tape in line with the centers of the bolt holes. Measure the distance between the bolt holes’ centers as accurately as possible.[7]- The bolt spread is the most important measurement, especially if you’re buying a specialty seat. If your bolt spread isn’t an American-standard 5 1⁄2 in (14 cm) or a European-standard 6 to 6 1⁄2 in (15 to 17 cm), you may need to order a specialty seat from the toilet's manufacturer.
Measure the bowl’s length and width. Hold one end of the measuring tape in line with the centers of the bolt holes, and bring the other end to the front of the bowl. Note the length between the bolt holes and the tip of the bowl’s front edge. Then, as you would with the seat, measure from the outer edges of the bowl’s broadest points to find its width.[8]- If your toilet’s dimensions are standard, the bowl’s width isn’t quite as important as the length and bolt spread dimensions. However, measuring the width can ensure a proper fit, especially if you’re buying a specialty seat or have a non-standard toilet.
Determine the distance between the bolt holes and the tank. If you’re buying a specialty seat, measure between the centers of the bolt holes and the edge of the tank. Bidet attachments, raised seats, seat warmers, and other specialty seats require a minimum clearance between the bolt holes and the tank.[9]- Before investing in a specialty seat, look online to find specifications and minimum clearances for a product you're interested in purchasing. You wouldn’t want to shell out lots of money on a product that doesn’t fit your toilet.
Measure the existing seat if you're buying a snap-on attachment. Types of attachments include accessible raised seats for people with disabilities and potty training seats. Measure your existing seat's length and width, and choose a product with matching dimensions. Even if you can tell your toilet's shape just by looking at it, measure it to ensure the accessible or potty training seat fits snugly.- While most products clamp onto the seat, some attachments are hinged-fixed, or secured with the existing seat's mounting bolts. If necessary, measure your toilet's bolt spread in addition to the seat's length and width.
Tip: If your seat attachment has armrests or handles, make sure there's enough room between the toilet and any nearby walls or fixtures.
Purchase a round seat if your bowl’s length is about 16 1⁄2 in (42 cm). In the U.S., modern seat sizes are standardized. If your seat is between 16 and 17 in (41 and 43 cm), it’s round. More likely than not, you can just look for a round seat at the hardware or home improvement store and it’ll fit your toilet.[10]- You can usually tell the difference between round and elongated seats with the naked eye, but it never hurts to double check. Taking measurements could save you a second trip to the store.
Go with an elongated seat if the bowl’s length is around 18 1⁄2 in (47 cm). In the U.S., the standard size for elongated seats is 18 to 19 1⁄2 in (46 to 50 cm). Elongated seats are easily recognizable but, as with round seats, it’s wise to measure the seat’s length, bolt spread, and width just to be safe.[11]
Select a seat that matches the bowl shape if you have a European toilet. European bowls are usually rounded, pointed, or D-shaped; these shapes are fairly easy to identify with the naked eye. For each shape, the standard length is about 17 in (43 cm), so choosing a replacement seat comes down to finding the right shape.Identifying European bowl shapes: As the name implies, D-shaped seats resemble the letter D and are easy to spot. Pointed seats are slightly elliptical in shape and are typically about 1⁄4 in (6.4 mm) longer than round seats, which are nearly perfect circles.
Find your toilet’s make and model if it’s non-standard. While modern seat sizes are standardized, you might find that your older toilet’s dimensions are completely different. You may be able to find older seats online or at specialty plumbing suppliers. Search online for your toilet’s make and model, or try entering keywords such as “toilet seat 8 in (20 cm) bolt spread.”[12]- A few contemporary models also have non-standard dimensions. For these toilets, search for matching seats online or order one directly from the manufacturer.
- To find your toilet’s make and model, lift the tank lid, flip it over, and look for a brand name and model number. If you can’t find the make and model on the tank lid, grab a flashlight and check inside the tank.
Expert Q&A
- QuestionIs there a standard size for toilet seats?
Eric ShipeEric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
Home Improvement SpecialistRound toilets are around 16-17 in (40.6 - 43.2 cm) from the center front of the bowl to the center of the hinges, while elongated toilets are around 18-19 in (20.3 - 48.3 cm). - QuestionHow do you know if a toilet seat is matching?Eric ShipeEric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
Home Improvement SpecialistTake 3 specific measurements of your toilet. First, measure between the bolt holes, from center to center. Then, measure the width of the toilet bowl at its broadest point. For your final measurement, measure the length of the toilet from the center front of the bowl to the center front of the hinges. - QuestionHow far apart are toilet bolts?Eric ShipeEric Shipe is a Kitchen and Bath Designer and the Owner of Bath + Kitchen based in Washington DC. Eric and his team specialize in cabinetry, design, and remodels. They serve homeowners, interior designers, architects, and contractors with a refined process, creative ideas, 4K photo-realistic renderings, and 360 Panoramic views. Bath + Kitchen was featured in Best of Houzz 2017-2020. Eric holds a BA in Economics and Business Administration from Ursinus College.
Home Improvement SpecialistToilet bolts are usually 5.5 in (14 cm) apart. You can find them on the back of your toilet seat.
Tips
References
- ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
- ↑ https://flushguide.com/how-to-measure-for-a-new-toilet-seat/
- ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
- ↑ https://flushguide.com/how-to-measure-for-a-new-toilet-seat/
- ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
- ↑ Eric Shipe. Home Improvement Specialist. Expert Interview. 11 June 2021.
- ↑ https://flushguide.com/how-to-measure-for-a-new-toilet-seat/
- ↑ https://images.homedepot-static.com/catalog/pdfImages/85/854a8015-17a2-4979-bd3c-aaffa583b541.pdf
- ↑ https://www.youtube.com/watch?v=rOPV7bU_9FM&feature=youtu.be&t=63
About This Article
To measure your toilet for a replacement seat, hold one end of a measuring tape to the bolts that secure the back of the seat to the bowl. With the end of the measuring tape in place, draw the tape to the very tip of the bowl and note the seat’s length on a piece of paper. For an accurate measurement, hold the tape in line with the center of the bolts. If there are flaps covering the bolts, lift them with your fingers or a flat-head screwdriver to get a more accurate measurement. Then, measure the length between the centers of the mounting bolts and write this number down as well. Finally, measure the width of the seat by measuring across the center of the seat from left to right. With these measurements written down, head to a hardware store to find your brand new toilet seat! For more tips, including how to measure for specialty seats, read on.
Reader Success Stories
"I didn't know my toilet was a European one. I found it out when I read this information and measured the seat."
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
