How to Measure a Baseball Glove: Positions, Sizing Charts, & More

A baseball player’s glove is among the sport’s most essential pieces of equipment. Finding the size of a glove is easy enough, but choosing the right baseball or softball glove can be a little trickier. When buying a glove, consider the player’s age and position, as well as their own personal preference. We’ll guide you through how to measure and choose a baseball glove to make sure you get the right one for your needs, and we’ll give you some handy buying tips and terminology to make sure you know what you need to know before you get on the field.

Things You Should Know

Measure a baseball glove from the tip of the index finger to the base of the palm.
Measure a catcher’s mitt by wrapping a measuring tape horizontally around the center of glove.
Choose a glove based on the age and position of the player.

Section 1 of 4:

How to Measure a Baseball Glove

Download Article

1
Measure from the tip of the glove’s index finger to the base of the heel. Run a flexible tape measure down the finger and along the palm to the bottom of the glove. This number will give you the size of the baseball glove in inches.^{[1]XResearch source}
- The size of the glove is also often etched into the leather on the pinky or thumb of the glove.^{[2]XResearch source}
- The “heel” is the palm area of the glove where the finger pockets all connect.
- You can also use a length of string to measure this, then use a ruler or measuring tape to measure the length of string.
2
Wrap a measuring tape around the center of a glove horizontally. This will give you the measurement of the catcher’s mitt. You can also measure it with a string–mark on the string where its ends meet, then measure the distance between the marks to find the size of the glove in inches.^{[3]XResearch source}
- Catcher’s mitts are measured this way because they place a greater emphasis on the catching area of the mitt, where the ball will land.^{[4]XResearch source}
Advertisement
Though softball gloves are constructed differently to accommodate different hand sizes and a larger ball, they’re measured in the same manner as baseball gloves.^{[5]XResearch source} Softball catcher’s mitts are also measured by circumference, as well.

Section 2 of 4:

Baseball Glove Sizing Chart

Download Article


Age	Catcher	First Base	Second Base	Third Base	Pitcher	Outfield
Under 7	29.5″ to 30″	11.5″	8″ to 10.5″	8″ to 10.5″	8″ to 10.5″	9″ to 10.5″
8-10	30″ to 31″	11.5″ to 12″	10.5″ to 11.25″	10.5″ to 11.5″	10.5″ to 11.5″	10″ to 12″
11-13	30″ to 32.5″	11.5″ to 12″	11″ to 11.5″	11″ to 11.75″	11.5″ to 12″	11.75″ to 12.75″
Over 14	32″ to 34.5″	12″ to 13″	11.25″ to 11.5″	11.5″ to 12″	11.5″ to 12″	12″ to 13″

How.com.vn English: Measure a Baseball Glove Step 3

Section 3 of 4:

Tips for Choosing a Glove

Download Article

1
Purchase a glove that fits the position you play. Different gloves are better suited to different positions, and purchasing a glove that fits the needs of the position may help you play better.^{[6]XResearch source}
- Outfielders’ gloves are for players playing left, center, or right field. They're typically longer than other gloves with deeper pockets to help outfielders catch fly balls.^{[7]XResearch source}
- Second base/shortstop gloves are small and lightweight, since these players need quick and easy access to the ball once they’ve caught it.^{[8]XResearch source}
- First base gloves tend to be longer and larger than the others to help players scoop balls off the ground and catch quick passes.^{[9]XResearch source}
- Third base gloves are larger to more easily catch a pass since third basemen don’t typically need to make quick passes themselves.^{[10]XResearch source}
- Pitcher’s gloves are most dependent on a player’s taste, however most pitcher’s gloves tend to have a closed web to conceal the pitcher’s fingers as they signal which pitch they’re about to throw.^{[11]XResearch source}
- Catcher’s mitts are the largest and have plenty of padding to protect a catcher’s hand against the pitcher’s powerful throws.^{[12]XResearch source}
- If you’re unsure of the player’s position, or they play many positions, choose a middle infield glove or “utility” glove, which is a good all-around glove that suits many styles of play.^{[13]XResearch source}
Baseball gloves are made for both right- and left-handed players. A player throws a baseball with their dominant hand, and the glove rests on their other hand. Gloves are labeled by dominant hands. This can be confusing, since gloves labeled as “right-handed” are actually worn on the left hand.^{[14]XResearch source}
3
Try on the glove if possible. Though gloves are widely available online, it’s best to visit an outlet in person in order to get a better feel for the glove before you purchase it. The best glove is one that the player feels comfortable using, regardless of measurement guides or glove components.^{[15]XResearch source}
- If you can’t try on a glove, purchase a size according to the above chart.
It might be tempting to buy a younger player a glove they can “grow into,” however a glove that’s too large could make it harder for a young player to handle their glove. If size is a concern, don’t buy a glove more than about a half in larger than you think the player will need.^{[16]XResearch source}
Leather gloves tend to be more durable than vinyl gloves, which are also harder to break in. Leather gloves will last 2 or more seasons and can be more easily broken in to mold to a player’s hand.^{[17]XResearch source}

Section 4 of 4:

Parts of a Baseball Glove

Download Article

1
Webbing The webbing is the area between the index finger and thumb, and is used to mitigate the force of the ball as it enters the glove.^{[18]XResearch source} More widely spaced webbing is typically better for infielders who need to retrieve the ball quickly, Outfielders and third-base players benefit from tighter webbing, which makes the ball easier to catch.^{[19]XResearch source}
- Basket webbing is tightly woven, and often makes it easier to close the glove.
- Trapeze webbing resembles shoelaces and can create a deeper pocket in the glove.
- Modified trap webbing adds a leather strip to the top of the glove, and is used by pitchers, infielders, and outfielders.
- H-webbing is created by leather strips that resemble the letter H, and is designed to let debris empty through the glove.
- I-webbing consists of a large center leather strip in the shape of an I, and helps to get the ball in and out of the glove.
- Cross webbing is composed of two perpendicular strips of leather and provides good flexibility.
- Two-piece webbing has large leather panels, and helps conceal pitches.
The palm of the glove is the padded base from which the fingers extend. This area is padded to protect the hand from the force of the ball.^{[20]XResearch source}
This is the lower section of the palm. It protects the hand, and helps keep the ball secure in the glove.^{[21]XResearch source}
The lacing is what keeps the glove together, and also acts as the force the shapes the glove. This is typically made of leather to allow it break in more easily as the player uses the glove.^{[22]XResearch source}
This is the portion of the glove that flexes as the glove opens and closes.^{[23]XResearch source} It also determines how easily the glove can open. Younger players may need a looser hinge.^{[24]XResearch source}

Expert Q&A

Search

Add New Question

Question
How do you break in a new baseball glove?
Isaac Hess
Baseball Coach & Instructor
Isaac Hess is a Baseball Coach, Instructor, and the Founder of MADE Baseball Development and Champion Mindset Training Program, a baseball training program based in Los Angeles, California. Isaac has over 14 years of experience coaching baseball and specializes in private lessons and tournaments. He has played baseball for both professional and collegiate leagues including Washington State University and the University of Arizona. Isaac was ranked as one of Baseball America's top 10 prospects for 2007 and 2008. He earned a BS in Regional Development from the University of Arizona in 2007.
Isaac Hess
Baseball Coach & Instructor
Expert Answer
Pound the glove with a baseball by throwing the ball into the pocket over and over again. If you can, play a game of catch with someone, ideally a hard thrower. Catching the ball in the pocket over and over will start breaking it in. You could also loosen the leather by applying a small amount of oil. Better quality gloves with firm leather take longer to break-in, but your glove will also last longer.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 1