Download ArticleDownload Article

There are a few ways to measure the size of your computer monitor, depending on whether you want to know the image area, the aspect ratio, or the diagonal measurement. All of these measurements are easy to determine, using a ruler or tape measure and some simple math.

Part 1
Part 1 of 2:

Determining Image Area

Download Article
  1. How.com.vn English: Step 1 Measure the length of the monitor screen.
    Use a ruler to measure the horizontal length of the monitor from one end to the other. Don’t include the frame or structure around the monitor, measure only the viewing screen.
  2. How.com.vn English: Step 2 Measure the height of the monitor screen.
    Only measure the image area rather than the frame or border around the monitor. Use a ruler to determine the vertical height from the top of the screen to the bottom.
    Advertisement
  3. How.com.vn English: Step 3 Multiply the length by the height.
    To find the image area, multiply the height of the monitor by the length of the monitor. Express the image area in “horizontal length x vertical height.”
    • For instance, if the length is 16 inches (40.6 cm) and the height is 10 inches (25.4 cm), the image area can be found by multiplying 16 by 10, which equals 160 square inches.
  4. Advertisement
Part 2
Part 2 of 2:

Finding the Aspect Ratio and Diagonal Measurement

Download Article
  1. How.com.vn English: Step 1 Determine the aspect ratio by comparing the length and height.
    Computer monitors are usually made with an aspect ratio of 4:3, 5:3, 16:9, or 16:10. To find the aspect ratio, compare the length to the height and reduce the numbers if necessary.[1]
    • If the length is 16 inches (40.6 cm) and the height is 10 inches (25.4 cm), the aspect ratio is 16:10.
    • If the length is 25 inches (63.5 cm) and the height is 15 inches (38.1 cm), the aspect ratio is 25:15, which can be divided by 5 to reduce it to 5:3.
  2. How.com.vn English: Step 2 Measure the distance between opposite corners to find the diagonal.
    The diagonal measurement is what is usually referred to when describing the size of the monitor. Use a tape measure or ruler to find the distance between, for instance, the top left corner of the screen and the bottom right corner of the screen. Don’t include the bezel or frame that borders the screen.[2]
  3. How.com.vn English: Step 3 Use the pythagorean theorem to determine the distance of the diagonal.
    If the screen is too large to measure diagonally or if you don’t want to smudge it, you can use the pythagorean theorem to find the diagonal distance. Square the screen’s height and the screen’s width, add the 2 numbers together, then find the square root of the sum, which is the diagonal measurement.[3]
    • For example, if the height is 10 inches (25.4 cm), multiply that by itself (10x10=100). Then, multiply the length, 16 inches (40.6 cm), by itself (16x16=256). Add the 2 numbers together (100+256=356), then find the square root of the sum (√356=18.9).
  4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      How.com.vn English: Sophia Latorre
      Co-authored by:
      How.com.vn Staff Writer
      This article was co-authored by How.com.vn staff writer, Sophia Latorre. Sophia Latorre is a Content Manager on the How.com.vn team. Before joining How.com.vn, Sophia worked as a technical editor and was published in six International Energy Agency (IEA) Wind Annual Reports. Now, she writes, edits, and reviews articles for the How.com.vn Content Team, working to make the content as helpful as possible for readers worldwide. Sophia holds a BA in English from Colorado State University. This article has been viewed 226,128 times.
      How helpful is this?
      Co-authors: 8
      Updated: January 2, 2024
      Views: 226,128
      Categories: Computer Monitors
      Article SummaryX

      To measure your monitor size, first use a ruler or measuring tape to measure the horizontal length of your monitor screen, not including the frame around the viewing screen. Next, measure the vertical height of the monitor screen, again, excluding the frame. Then, multiply the length measurement by the height measurement to get the area size. For example, if your monitor is 16 inches long and 10 inches tall, the image area will be 16 x 10 = 160 inches. To learn how to use these numbers to find the aspect ratio of your monitor, read on!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 226,128 times.

      Is this article up to date?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement