How to Make iPhone Ringtones on a PC

Download Article

This How.com.vn teaches you how to create a ringtone for your iPhone using your Windows computer's iTunes program.

Part 1

Part 1 of 4:

Trimming a Song

Download Article

1
Open iTunes. It's a white icon with a multicolored musical note on its front. If you don't have iTunes installed on your computer, first download and install it before continuing.
- If a window pops up that tells you to update iTunes, click Download Update and wait for iTunes to update. You'll need to restart your computer after iTunes finishes updating.
2
Open your preferred song in iTunes. You can do so by clicking and dragging any .mp3-type file into the iTunes window.
- If iTunes is your computer's default audio program, simply double-click the song to open it.
- If the song is already in your library, navigate to it.
Advertisement
3
Double-click your track to listen to it. You'll need to make a note of the following things:
- The time at which the section where you want your ringtone to start begins.
- The time at which your ringtone needs to end. The maximum length for an iPhone ringtone is 30 seconds.
Doing so will prompt a drop-down menu.
It's toward the middle of the drop-down menu.
You'll find this tab near the top of the "Get Info" window.
Doing so will allow you to customize the song's starting point and stopping point.
8
Type in the beginning time stamp in the "Start" box. This should be the time in the song at which you want you ringtone to start.
- You'll type in the following format: minute:second.tenth of a second. For a time stamp of one minute and thirty seconds, then, you'd type "01:30.0".
This box is directly below the "Start" box.
It's at the bottom of the "Get Info" window. Now that your song has been trimmed, you'll need to convert it to a supported ringtone file type.

Part 2

Part 2 of 4:

Converting the File Type

Download Article

It will become highlighted in blue.
It's in the top-left corner of the iTunes window.
You'll see a window pop out with several different options.
4
Click Create AAC Version. You'll hear a confirmation sound, and a second version of your selected song will appear below the original.^{[1]XResearch source}
- Notice that the playtime for the AAC version of the song reflects the section you trimmed, not the original song's length.
Make sure you double-check the length of the song before doing so, since you'll likely want the shorter of the two songs with the same name listed here.
Doing so will open the AAC copy of your song in the Windows File Explorer utility, where you can proceed to edit it.
7
Make sure your computer displays file types. If it doesn't, you'll need to enable this feature before proceeding.
- The name of the "Folder Options" search option is actually "File Explorer Options" on Windows 10.
This will prompt a drop-down menu.
It's near the bottom of the drop-down menu.
You'll see this at the end of the file name.
11
Replace the .m4a extension with .m4r. This will make the file readable as an iPhone ringtone.
- You'll press ↵ Enter when you're done typing to save your changes.
This will confirm your file type change.
13
Make sure the file opens with iTunes. If iTunes is your default player for audio files, you'll see the iTunes logo as your ringtone's file icon.
- If iTunes isn't your default player for .m4r files: right-click the file, click Properties, click Change near the top of the "Properties" window, and select iTunes from the pop-up window.
It'll open in iTunes, which adds it back to the iTunes library as a tone.
This option is in the top-left corner of the iTunes window, just above the "Library" column.
16
Click Tones in drop-down menu. You should see your tone here. If you double-click it and it begins playing, you're ready to proceed to uploading it onto your iPhone.
- If you're prompted to select the file's location: click Locate, select Windows Explorer from the bar on the left side of the window, and click the ringtone file.
- Make sure there's a checkmark to the left of your ringtone's name.

Part 3

Part 3 of 4:

Adding the Ringtone to Your iPhone

Download Article

To do so, attach the large end of your iPhone's charging cable to a USB port on your computer, then attach the charger end to the port at the bottom of your iPhone.
It's the iPhone-shaped icon above the column of options on the left side of the iTunes window.
This option is below your iPhone's name in the column on the left side of the iTunes window.
4
Make sure Tones are able to sync. If there isn't a checkmark in the box next to "Tones" at the top of the page, click the "Tones" box, then click Remove and Sync when prompted.
- If you have to enable syncing, unplug your iPhone, then plug it back in to continue. You'll need to click the device icon again and then click Tones.
This option is below the "Tones" heading at the top of the page. Doing so will bring up a list of your iTunes library's ringtones.
This will select it for uploading to your iPhone.
It's near the bottom-right corner of the iTunes window.
This option is in the bottom-right corner of the iTunes window. When syncing finishes, you'll hear a confirmation noise, and the progress bar at the top of the window will disappear. Your ringtone should now be on your iPhone, which means you're now able to access it in your iPhone's Settings.

Part 4

Part 4 of 4:

Accessing Your Ringtone

Download Article

This is a grey app with gears on it that you'll likely find on the Home Screen.
2
Scroll down and tap Sounds. It's near the top of the "Settings" page.
- If you have an iPhone 7 or 7 Plus, tap Sounds & Haptics.
3
Tap Ringtone. It's near the bottom of the screen.
- If your iPhone has a 4.7-inch screen, you'll need to scroll down to see this option.
4
Scroll up to the top of the "Ringtone" page. Any uploaded ringtones will be here above the "Opening (Default)" tone. You can tap the ringtone's name at the top of this page to set it as your default ringtone for any incoming phone or FaceTime calls. To set this ringtone for a specific contact:
- Open the Contacts app, or open Phone and tap Contacts at the bottom of the screen.
- Tap a contact's name.
- Tap Edit in the top-right corner of the screen.
- Tap Ringtone near the bottom of the screen.
- Tap your new ringtone.
- Tap Done in the top-right corner of the screen, then tap it again.

Community Q&A

Search

Add New Question

Question
Why doesn't my file say m4a?
OPJustin
Community Answer
You should rename your file to make it end with .m4a so it can be used by the iPhone as a ringtone.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 11 Helpful 3
Question
After renaming the file to .m4r, the file does not play in iTunes. What do I do now?
Community Answer
Double-check and make sure the file is without any viruses.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 22 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

If you don't see the option to convert your song into AAC in File > Convert, go to Preferences (Ctrl+, or ⌘ Cmd+,). In the General tab, you'll want to select "AAC Encoder" within your "Import Settings". This will replace "Create MP3 Version" with "Create AAC Version."
Thanks
Helpful0 Not Helpful0
Once you've created an AAC version of your song, you can disable the "Start" and "Stop" time stamps on the original version of the song to allow it to play normally.
Thanks
Helpful0 Not Helpful0