Download Article
A few ways to make your own abacus at home
Download Article

Before there was the calculator, people used the abacus for basic math and accounting. While it’s no longer necessary thanks to smart phones and computers, an abacus is still useful for parents and teachers to help children learn how to count, how to add and subtract, and how to understand decimal places. You can make your own at home with basic materials found at a craft store.

Method 1
Method 1 of 2:

Building It with Wood

Download Article
  1. How.com.vn English: Step 1 Cut 4 pieces of wood for the frame.
    For 2 pieces, trim a 34 in (1.9 cm) wood board into 11 in (28 cm) sticks using a saw. For the other 2, cut a 14 in (0.64 cm) wood board into slightly longer 12.5 in (32 cm) sticks.[1]
    • The local hardware store should be able to cut these for you if you don’t have a saw.
  2. How.com.vn English: Step 2 Sand the 4 pieces of wood to create smooth edges.
    Use a medium grit (100 to 150 grit) sandpaper on the cut edges of the wood pieces.[2] You can also sand down any sharp corners or splintered sections which could be a safety hazard for kids.
    Advertisement
  3. How.com.vn English: Step 3 Drill 10 evenly-spaced holes into both of the 11 in (28 cm) pieces.
    Mark the spots with pencil or marker before drilling to make sure they’re each an inch apart, then use a 18 in (0.32 cm) drill bit to create the holes. Only drill halfway through the wood.[3]
  4. How.com.vn English: Step 4 Insert the 10 brass tubes into the holes on one 11 in (28 cm) piece.
    Push them firmly into the holes, twisting as you press to make sure they're secure. A little drop of hot glue in the hole before you insert the tube can add extra hold.
    • Instead of brass tubes, you can also use wooden barbecue skewers.
  5. How.com.vn English: Step 5 Place 10 beads onto each tube.
    The beads can be any size, material, or color. If you go with wooden beads, you can use acrylic paint to decorate the beads in whatever colors and patterns you'd like.
    • Painting beads while they're on a string or skewer makes it easier to coat the entire bead. They'll also dry more evenly and not smear.[4]
    • For an ombre look, choose 10 different shades of one color that will go from darkest to lightest as you move down the abacus.
  6. How.com.vn English: Step 6 Stick the tubes' other ends into the holes on the other 11 in (28 cm) piece.
    Don’t forget to press the 2 pieces of wood together gently but firmly to secure the sticks. Again, dabbing hot glue on the ends of the tubes or in the holes before pushing the piece of wood on can help.
  7. How.com.vn English: Step 7 Attach the top and bottom pieces of wood using screws.
    Take one of the 12.5 in (32 cm) wood pieces and lay it flat against the tops of the connected 11 in (28 cm) pieces. Drill a pilot hole on each side and screw together to hold. Repeat this on the bottom of the abacus with the other 12.5 in (32 cm) piece to finish the frame.
    • Skip the drilling by securing the pieces of wood in place with wood glue instead.
  8. Advertisement
Method 2
Method 2 of 2:

Using Pipe Cleaners

Download Article
  1. How.com.vn English: Step 1 Glue 4 jumbo craft sticks together to make a square frame.
    Use hot glue to hold the sticks securely in place.[5] You can also buy a picture frame instead and simply remove the backing to skip this step.[6]
    • For a colorful abacus, paint the popsicle sticks with acrylic paint before assembling.
  2. How.com.vn English: Step 2 Thread 10 beads onto a pipe cleaner, 5 in one color and 5 in another.
    For example, you’ll have 5 pink beads followed by 5 blue beads on one pipe cleaner. Repeat until you have 10 pipe cleaners with 10 beads each.
    • This is a great step for kids to help with to practice their motor skills.
    • If you don’t have pipe cleaners, you can use pieces of string or wire.
  3. How.com.vn English: Step 3 Arrange the 10 pipe cleaners in a row in the frame.
    They should be evenly spaced and not touching each other so that you can move the beads on each pipe cleaner.
  4. How.com.vn English: Step 4 Wrap the ends of each pipe cleaner around the sides of the frame.
    You can use a drop of hot glue under each end to stop the pipe cleaner from slipping down the craft stick. Trim any extra pipe cleaner with scissors and tuck the end neatly around the stick.[7]
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Which type of beads should I use?
    How.com.vn English: Tina X
    Tina X
    Community Answer
    Any type of bead will work. Wooden beads may be the best choice, but it all depends on you. Try to avoid using crafting beads (plastic, colorful ones).
  • Question
    How to make an abacus with cardboard?
    How.com.vn English: Lyka
    Lyka
    Community Answer
    You can use cardboard as a good alternative to wood. Get a size that can fit the beads of your choice. Make a frame by cutting a rectangle inside. Stick the thread, wire, or stick with the beads at the edge of the cardboard using glue or another better alternative. To make it sturdy and more presentable, cut another cardboard frame of the same size and cover the side where you stuck the stings/wired/stick in between the two frames. When the glue dries, you can add designs at the frame if you like.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Avoid having to cut wood by buying 4 large lolly sticks to use as the border.[8]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always use the blade guard when sawing. This not only protects your fingers from the saw, it acts a shield to deflect any wood that shoots off.
      • Wear safety glasses when using a saw or drill to protect your eyes from any flying pieces of wood or debris.
      • A push stick can help keep your fingers from getting too close to the saw. You'll push the wood through the table saw with the stick instead of your fingers.[9]
      Advertisement

      Things You'll Need

      Building It with Wood

      • 34 in (1.9 cm) wood board
      • 14 in (0.64 cm) wood board
      • Table saw
      • Sandpaper
      • Safety glasses
      • Marker or pencil
      • Drill
      • 18 in (0.32 cm) drill bit
      • 100 wood beads
      • 10 brass tubes or wooden barbecue skewers
      • Acrylic paint
      • 4 screws
      • Wood glue (optional)
      • Hot glue gun and hot glue sticks (optional)

      Using Pipe Cleaners

      • 4 jumbo craft sticks
      • Hot glue gun
      • Hot glue sticks
      • Acrylic paint
      • 100 beads
      • 10 pipe cleaners
      • Scissors

      About This Article

      How.com.vn English: Joseph Meyer
      Reviewed by:
      Math Teacher
      This article was reviewed by Joseph Meyer. Joseph Meyer is a High School Math Teacher based in Pittsburgh, Pennsylvania. He is an educator at City Charter High School, where he has been teaching for over 7 years. Joseph is also the founder of Sandbox Math, an online learning community dedicated to helping students succeed in Algebra. His site is set apart by its focus on fostering genuine comprehension through step-by-step understanding (instead of just getting the correct final answer), enabling learners to identify and overcome misunderstandings and confidently take on any test they face. He received his MA in Physics from Case Western Reserve University and his BA in Physics from Baldwin Wallace University. This article has been viewed 56,500 times.
      43 votes - 76%
      Co-authors: 3
      Updated: March 12, 2023
      Views: 56,500
      Categories: Mathematics
      Article SummaryX

      To make your own abacus, you can use craft sticks, pipe cleaners, and beads. First, glue 4 jumbo craft sticks together to make a square frame. Once your frame is assembled, thread 10 beads onto a pipe cleaner, making sure the first 5 beads are in 1 color, and the other 5 are in a different color. Repeat this step until you have 10 pipe cleaners, each one with 10 beads on it. Arrange the 10 pipe cleaners in a row, then wrap the ends around the sides of the frame. Use a drop of hot glue under each end of the pipe cleaners to stop them from slipping down the craft stick. To learn how to build an abacus out of wood, keep reading!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 56,500 times.

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement