How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 49,557 times.
Catching a fish on topwater is one of the best experiences for any fisherman. Watching the fish strike at the lure is exciting. There are many, many variations of topwater lures, but this guide will teach you how to create your own out of wood.
Steps
Cut a 1 inch (2.5cm) diameter dowel rod to the desired length. Most saltwater topwaters are between 3 inches and 6 inches (7-15 cm).
Drill a 3/8" (10mm) hole about halfway into one end of the lure using a drill press.
Insert two or more metal BBs into the drilled hole to add weight. Use different BBs to adjust the weight.
Cut a 1/2-inch long piece off the 3/8 inch (10mm) diameter dowel.
Glue the 1/2 inch piece into the hole of the lure and let dry. Tap the piece into the hole with a hammer to ensure a watertight fit.
Sand the lure to the desired oval shape using a belt sander.
Drill a shallow hole on either side of the head of the lure. Make it approximately 1/16 inch (2mm) deep.
Insert threaded screw eyes into the nose, underside, and rear of the lure.
Paint the lure to the desired color scheme and allow to dry.
Attach split rings onto the underside and rear eyes of the lure.
Attach appropriate sized treble hooks onto the split rings. For lures 4 to 6 inches (10-15cm) long, try a size 2 treble hook. For a lure less than 4 inches (10cm) use a size 4 treble hook.
Glue eyes into the shallow holes on either side of the head.Advertisement
Community Q&A
- QuestionHow can I fish successfully in a lagoon?
Community AnswerResearch the area and the types of fish there, and treat it as any other body of water.
Tips
- If you use wood that is too soft, the fish could destroy the lure. Use wood sturdy enough to handle a fish strike.Thanks
- Use stainless steel hardware to prevent rusting in saltwater.Thanks
- Lacquer the outside to help preserve the lure.Thanks
Warnings
- Wear safety gloves and goggles whenever using the saw, drill press, and belt sander.Thanks
Things You'll Need
- 1 inch (2.5cm) diameter wood dowel rod
- 3/8 inch (1cm) diameter wood dowel rod
- Metal BBs
- Super glue
- Spray paint
- Threaded screw eyes
- Treble hooks
- Split rings
- Saw
- Belt sander
- Drill press
- Hammer
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
