How to Make a TV in Minecraft

This How.com.vn teaches you how to create a decorative TV in Minecraft's Creative mode. While you cannot create an actual working TV with channels, you can build an ornamental TV that will light up at the press of a button.

Part 1

Part 1 of 4:

Preparing to Build

Download Article

1
Start a game in Creative mode. While you technically can build a TV in Minecraft's Survival mode, gathering the resources to craft the technical components of the television will take an enormous amount of time.
- If you have an existing world in Creative mode, you can just load that world instead.
2
Select the necessary items for your TV. Open the creative menu by pressing E (PC), ⋯ (PE), or X or square (Xbox/PlayStation), then add the following items to your equip bar:
- A building material (e.g., cobblestone)
- Pistons
- Redstone
- Redstone repeaters
- Redstone lamps
- A lever
- A painting
Advertisement
If you have an existing structure, you might want to set up the TV in the living room or in an underground basement-type area. Keep in mind that you will need several blocks' worth of space behind and on either side of the TV, however.
Place at least a four-by-four wall of blocks in the area in which you want to build your TV. After you have done this, you can proceed with creating the TV's screen.

Part 2

Part 2 of 4:

Making the TV Screen

Download Article

Your TV hole should be two blocks wide and one block tall.
Face toward where you want your TV screen, then place a piston in each of the holes for the missing blocks in your wall.
3
Place a redstone repeater below and behind each piston. Go around to the back of the wall and face the backs of the pistons, then place a redstone repeater one block below and one block behind each piston.
- If your pistons are more than one block above ground level, you'll have to create a platform for your redstone repeaters.
This will cause the repeaters to activate; you should hear the repeater's respective piston fire as you place a torch.
Select the back of the piston with the redstone lamp equipped, then place it and repeat for your other piston. This is the TV's "backlight" since redstone lamps shine through pistons.
6
Place a picture on the left piston. Go back around to the front of the wall, select the painting in your equip bar, and place it on the left piston. This will cause the painting to cover both pistons, thus creating your "screen". Now you can move on to making the TV's remote.
- You can remove and reapply the painting if you don't like the image on it.

Part 3

Part 3 of 4:

Making the Remote

Download Article

If you want to make the "remote" a bit more attractive, you can place the lever on top of a dedicated block of cobblestone or something similar.
2
Place a series of blocks building up to one of the redstone lamps. Place one block below and to the side of a redstone lamp, place another block below and to the side of that block, and repeat until you have a block "staircase" that leads from the side of the TV up to the redstone lamps.
- Keep in mind that redstone can only keep its power for fifteen blocks, so this block "staircase" can't be too high.
Place a redstone blot on each block in a line from the lever up to the top block in your "staircase", then place the final blot of redstone on one of the lamps. This will create a "wire" from the lever to the lamps.
4
Test your TV's remote. Select the lever by right-clicking (PC), tapping (PE), or pressing the left trigger (consoles); you should see the redstone lamps light up.
- If your lever was active when you placed the redstone, the redstone lamps will already be on, so pressing the lever will turn them off.

Part 4

Part 4 of 4:

Decorating the TV

Download Article

You can cover up everything behind the TV with your preferred building material by building a box around the back and filling it in. This will make the whole assembly more attractive.
If you don't want the redstone "wires" to be exposed, dig a trench for them and then build a wall over the top of them. You can't place blocks directly on top of your redstone wires, but you can place a block one block height above the wires without cutting off the connection.
3
Create a frame around your TV. Using a different building material than your wall uses, outline the TV's screen.
- You can also create "shelves" for your entertainment center in this way.
- The bookcase block is a good choice for lining the sides of the TV.
4
Add speakers to your TV. You can place a tower of jukeboxes around the sides of the TV if you want functional set of speakers, or you can place a speaker-like item (e.g., a Wither Skeleton skull) on either side of your TV.
- Since the TV itself doesn't actually display a moving image, using ornamental (nonfunctional) speakers are fine here.
Use quartz stairs for a white couch, or wood blocks for end tables. You can also add a block of glowstone to add a warm light to the room.
Select the lever to "turn on" the TV. Especially if the room is dim, this will light up your TV room, allowing you to enjoy your television.

Community Q&A

Search

Add New Question

Question
Is there a way to make sound or music come out of it?
Community Answer
Yes, if you leave some of the jukeboxes open (no blocks on top of them), then insert a music disk into them, you will have music. It won't really be coming out of the TV, but the sound will be close enough.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 57 Helpful 152
Question
Is there a way to make a glass box, fill it with animals, and then make a wall that slides up in front of the "T.V." when you press the button?
ChristianRoyalty
Community Answer
Use redstone. For a different solution, try to shield the animals into a spot and then use black glass, and other things.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 31 Helpful 64
Question
Can I make one in a tree house?
Community Answer
You can make it anywhere, but it's best for the sake of realism if it's in a living room.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 26 Helpful 48

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

To make the TV screen look more realistic and vivid, place glowstone or sea lanterns behind the painting instead of redstone lamps. The soft, gentle illumination from glowstone and sea lanterns will shine through the painting much better, making the "screen" appear bright and operational.
Thanks
Helpful0 Not Helpful0

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

Carefully size the painting to fit the TV frame — a small painting fits better in a 1-block tall gap. For wider screen TVs, use the largest paintings available to appropriately fill the frame. Mix and match painting sizes as needed.
Add some life and realism to the room by taming an ocelot and making it sit on the couch or floor. This will look just like a family pet relaxing in the TV room. Make sure to tame the ocelot first before moving it into position.
Use pistons facing sideways instead of forward to better hide the redstone machinery powering the "screen." Place all the redstone components and repeaters under the floor rather than behind the wall to conceal the wiring.
To mimic a modern, flatscreen television, build the frame 2 blocks thick instead of just 1. Carve out the middle block, leaving just the edges. This creates a recessed screen effect that looks like a real flatscreen TV.
For a cozier TV room, make a rug on the floor using different colored wool or carpet blocks. Use one color for the border and a completely different color for the inner part.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!