How to Make a Spanish Windlass

Move something heavy a short distance using little more than a piece of rope, a stick and something large to attach to. It is useful for moving or removing the stumps of garden shrubs.

Steps

Download Article

1
Wrap the rope around the object to be moved and a large immovable object in one continuous loop. The strength of the rope should be proportionate to the amount of pull that you wish to achieve. The rope can be wrapped more than once and a double or greater wrap is best.
- A tree makes a good immovable object to use as an anchor because many trees have rough bark. This means that the rope will not easily slip on the bark and removes the need for skillfully made knots. A simple reef knot, perhaps with a loop so that it is easily undone, will be sufficient. If either object is slippery, the knots used should be designed to be easy to undo and be placed so that they do not slip up or down either one of the objects.
- As you make the loop, it is a good idea to wrap it more than once around the object to be moved, overlapping the rope on itself as you do so. This grips the object firmly. When removing shrubs, start low on the plant but not right at the base. This will give some leverage to stress the roots. If you go too high, the plant will give as you tighten and you will not exert maximum force on the roots.
Choose a strong stick that is long enough to reach nearly twice from the middle of the loop to a firm place such as the ground. A smooth strong metal pole is good but any strong stick can be used.
Advertisement
This means that more of the stick is on one side of the rope than it is on the other.
If the rope breaks, this will absorb some of the energy of the rope as it snaps back along its length and reduce the risk of you being hit by it.
6
Twist the stick around and around so that it twists the rope around itself. The stick is kept at an angle (of around 30 degrees) to the line of the rope as you do this, allowing the longer end to avoid hitting the ground. The rope will begin to shorten and pull your object towards the anchor. Keep rotating until you have pulled the object as far as you need or the shortening rope will allow.
- If you need a rest, the stick can be set at right angles to the rope and positioned against the ground. A slippery 'stick' such as the steel pole shown in the pictures is convenient. As you start twisting, it is easy to slide it through and position it to rest securely. When the lift is under tension, it can spin the stick hard and fast. Be careful to make sure that the stick is secure before releasing hold of it.
- Twisting in this way can generate large forces between the object and anchor allowing quite heavy objects to be moved. If your rope is weak it may break. Stop if the fibres of the rope start to creak heavily or to break. A double rope helps to provide you with more warning of possible trouble. One strand of the rope is likely to be under more stress than the other and will creak or fray before the other.
- Quite large roots and other objects can be removed by this method but it will need to be set up repeatedly if the root is too large to move by hand.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

The lift can be set up again and repeated to move objects longer distances.
Thanks
Helpful5 Not Helpful1
Two people can work one lift if two sticks are used. Well coordinated, this is safer.
Thanks
Helpful1 Not Helpful0
Size your ropes and sticks in proportion to the load you plan to move.
Thanks
Helpful3 Not Helpful3

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

The "stick" needs to be as strong and rigid as possible without fear of breaking under pressure. If the stick breaks while you are twisting it, there is a significant chance of it breaking in a jagged fashion. The combination of this break and the spinning motion caused by the tension can severely injure you.
Thanks
Helpful1 Not Helpful0
Be very careful to secure the stick when you have the rope under tension before letting go of it. A spinning stick could hit you and injure you.
Thanks
Helpful0 Not Helpful0