Download ArticleDownload ArticleX
This article was co-authored by Jessie Antonellis-John. Jessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 301,283 times.
Few science fair projects are as timeless as a planet model, and for good reason. Planet models showcase knowledge about the planet, as well as skill at portraying its physical characteristics and scale. Whether you're creating a planet model for school or for fun, start by depicting your planet with papier mache or styrofoam. From there you can simply paint your planet or connect it to a solar system of your own making.
Steps
Decide which planet to make. This will help you determine how large to make your planet. While this isn't too important if you're only making one, if you decide to make a whole solar system of planets, you may want to make them somewhat to scale.- For example, you'd want to make Mars or Mercury much smaller than Saturn or Jupiter.
Blow up a balloon. Don't blow the balloon up too much, or it will become oval in shape. Try to add just enough air to make it circular, while making it as large or small as you'd like.- Place the balloon tied-end down in a bowl. This will hold it still and make it easier to apply the papier mache.[1]
Advertisement- Make your adhesive. You can use either glue and water, raw flour and water, or flour and water that's been cooked. There are different advantages to each: the glue and water is easy to mix up, the raw flour and water paste is stronger, and the boiled flour and water paste dries clear.
- For glue and water paste, use about 1/4 cup of white school glue and add water just till it becomes slightly runny.[2]
- For raw flour and water, mix enough water into flour until you get the consistency you'd like. Remember that thicker paste will take longer to dry and that you'll need to let your paper mache balloon dry overnight.
- For boiled flour and water, whisk together 1/2 cup flour of flour and 2 1/2 cups of water over medium heat until the mixture boils. It will thicken into a gel as it cools.[3][4]
- Shred your papers. You can use newspapers, brown craft paper, or construction paper. Use whatever you have easy access to and be sure to rip your paper into pieces or strips.
- Avoid cutting the papers. The straight lines will be visible once the paper mache dries. The torn edges of your ripped papers will blend in better.
- Apply your paper to the balloon. Dip the strips or pieces of paper into your paste. Be sure to completely coat the paper with the glue, but slide your fingers over the paper to remove excess paste. Lay the strips or pieces over your entire balloon. Add another layer of strips over your entire balloon.
- Use your hands to smooth out any bubbles or bumps on the surface of your balloon, unless you want to give your planet a bumpy texture.
Let your papier mache balloon dry. Leave it in a warm place to dry overnight. The paper and paste must be completely dry before you begin painting or decorating your model. If you don't let it dry, it may mold.- In some cases, it may take longer to dry. If your balloon has a lot of paste or layers, it may take more time. Try letting it dry a few days.
- Pop the balloon. Once your paper mache is dry, pop the balloon using a pin or a thumbtack.[5] Remove the deflated balloon and any bits of balloon that may be inside your hollow planet.
- Paint your planet. For a simple model, use acrylic to paint your planet with its predominant color.
- For the Sun, use yellow.
- For Mercury, use grey.
- For Venus, use yellowish-white.
- For Earth, use blue-green.
- For Mars, use red.
- For Jupiter, use orange with white striations.
- For Saturn, use pale yellow.
- For Uranus, use light blue.
- For Neptune, use blue.
- For Pluto, use light brown.
Advertisement
Decide which planet to make. This will help you determine how large to make your planet. While this isn't too important if you're only making one, if you decide to make a whole solar system of planets, you may want to make them somewhat to scale.- For example, you'd want to make Mars or Mercury much smaller than Saturn or Jupiter.
Select styrofoam (thermocol) balls. If you're only doing one planet, make it whatever size you'd like, but if you decide to make an entire solar system, choose different sizes. This will allow you to accurately depict the scale of the planets.- For the Sun, use a 5 or 6-inch ball.
- For Mercury, use a 1-inch ball.
- For Venus, use a 1.5-inch ball.
- For Earth, use a 1.5-inch ball.
- For Mars, use a 1.25-inch ball.
- For Jupiter, use a 4-inch ball.
- For Saturn, use a 3-inch ball.
- For Uranus, use a 2.5-inch ball.
- For Neptune, use a 2-inch ball.
- For Pluto, use a 1.25-inch ball.
- Paint your planet. For a simple model, use acrylic to paint your planet with its predominant color.
- For the Sun, use yellow.
- For Mercury, use grey.
- For Venus, use yellowish-white.
- For Earth, use blue-green.
- For Mars, use red.
- For Jupiter, use orange with white striations.
- For Saturn, use pale yellow.
- For Uranus, use light blue.
- For Neptune, use blue.
- For Pluto, use light brown.
- Add texture or defining characteristics to your model. If your planet has several colors, go back and dab the other color over the surface. If your planet has rings, attach wire or a styrofoam ring around the planet.
- For rings, you can also cut the styrofoam planet model in half horizontally and glue an old cd through the center. Reattach the styrofoam halves with glue. The CD should appear as rings around the planet.[6]
- For craters, you can chip out bits of styrofoam to make a craggy surface. You'll want to dab fresh paint over these areas.
- Prepare dowel rods if you want to make a solar system. If you've made all the planets to scale, take dowel rods and cut them to size. This will ensure that the planets are the appropriate distance apart.
- You won't need any dowel rods for the sun, since it will be the center of the system model.
- For Mercury, use a 2.25-inch rod.
- For Venus, use a 4-inch rod.
- For Earth, use 5-inch rod.
- For Mars, use 6-inch rod.
- For Jupiter, a 7-inch rod.
- For Saturn, use an 8-inch rod.
- For Uranus, use a 10-inch rod.
- For Neptune, use an 11.5-inch rod.
- For Pluto, use a 14-inch rod.
- Attach planets to the sun. Using the trimmed dowel rods, stick the rod into the corresponding planet. Then, stick the opposite end of the dowel rod into the sun. Be sure to stick rods around the entire circumference of the sun. Start with Mercury, closest to the sun, and work outward.
Here's a mnemonic to remember the order of the planets:
My Very Excellent Mother Just Served Us Nine Pizzas.
=
Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto
(If you aren't including Pluto, think My Very Excellent Mother Just Served Us Noodles instead.
Advertisement
Expert Q&A
Search
- QuestionHow can I creatively represent Saturn's rings in a planet model?
Jessie Antonellis-JohnJessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications.
Math and Science InstructorSaturn's rings are made up of tons of tiny rocks and dust — they're not solid disks. To show this, you could make a model where Saturn floats in water, with part of it sticking out. Then you can have spirals of stuff like glitter or sand floating around it to look like the rings. That shows they're not solid. - QuestionCan I use different colors?
Community AnswerYes, but it will look more realistic if you use the actual colors of the planet you're making. - QuestionHow do I get the deflated balloon out of the planet?
Community AnswerAs you stick the papers to the balloon leave a small opening. After the paper dries, you can pop the balloon with a pin and remove it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
SubmitAdvertisement
Video
Tips
- Oil paints can give more realistic finishing of the model.Thanks
- Lay newspaper over your workspace to contain some of the mess.Thanks
- Oil paints can give more realistic finishing of the model.Thanks
Tips from our Readers 
The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.
- Make sure to wait until the paint is dried before putting the sticks in. Acrylic paint usually takes 30 minutes to an hour to dry completely.
- You can also make a planet model by rolling sticky tack into a ball and then painting it.
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about science, check out our in-depth interview with Jessie Antonellis-John.
References
- ↑ https://www.elmers.com/blog-school/paper-mache-planets-tutorial.html
- ↑ https://www.elmers.com/blog-school/paper-mache-planets-tutorial.html
- ↑ http://www.ultimatepapermache.com/paper-mache-recipes
- ↑ http://www.lawrencehallofscience.org/static/diy_sun_science/downloads/diy_ss_model_sun_earth.pdf
- ↑ http://www.lawrencehallofscience.org/static/diy_sun_science/downloads/diy_ss_model_sun_earth.pdf
- ↑ http://spaceplace.nasa.gov/saturn-model/en/
About This Article
Math and Science Instructor
This article was co-authored by Jessie Antonellis-John. Jessie Antonellis-John is a Math and Science Instructor who teaches at Southwestern Oregon Community College. With over 10 years of experience, she specializes in curriculum development. Jessie earned her PhD in Teaching & Teacher Education from the University of Arizona, her Master of Education from Western Governors University, and her BS in Astrophysics from Mount Holyoke College. She’s also co-authored several peer-reviewed journal articles in professional publications. This article has been viewed 301,283 times.
Co-authors: 36
Updated: March 21, 2024
Views: 301,283
Categories: Astronomy
Article SummaryX
To make a planet model with papier mache, blow up a balloon slightly until you have a round shape, tie off the end, and place the balloon in a bowl. Create your adhesive in a separate bowl, then tear your paper into strips, dip them in the adhesive, and cover the balloon's surface with them. Try to smooth out bubbles and bumps unless you want the planet to have a bumpy texture, then let the papier mache dry overnight. Once it's dry, pop the balloon with a thumbtack, remove it, and paint the planet however you'd like! If you want to make your planet model out of styrofoam or thermocol, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 301,283 times.
Reader Success Stories
"I was looking for a simple example that would demonstrate the relationship between the planets of our solar system. This seemed to be an easy project and easy to for children to understand."..." more
Did this article help you?
⚠️ Disclaimer:
Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.
- - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
- - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
- - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
- - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.
Advertisement
