How to Make a Paper Ship

Paper ships are a toy that many a child has made since the creation of paper. They are easy to make and they can be "sailed" on any small body of water, such as a bath, a puddle, a pond or even a little stream. While not particularly durable, once you know how to make them they are easily replaceable!

Method 1

Method 1 of 2:

Making the Ship

Download Article

Take a piece of rectangular paper and place it in front of you so the paper is in portrait format, with the longer edges to the side. Fold it in half lengthwise from top to bottom, so that the fold is at the "top" of the piece of paper.^{[1]XResearch source}
This time fold the paper side to side, rather than top to bottom as in the first fold, then unfold. The crease marks your center line. Now you're back to after Step 1, with the paper folded in half top to bottom, but with a crease down the middle. Keep all your folds as straight and clean as possible.
Advertisement
Hold the top right corner and fold the tip down and towards the center. The top edge should line up with the center line.^{[2]XResearch source}
Repeat. Fold the other corner in the same fashion, lining it up with the center line.^{[3]XResearch source} This should create a "house" like shape with a "big" roof line and about an inch of paper below the triangle of the roof
Take one edge of the bottom rectangular strip of paper and fold upwards. Fold it as high up the “house” as it will go without folding the paper beneath it.^{[4]XResearch source}
Repeat the last fold. Fold up the opposite rectangular strip along the bottom of the house. Make sure the two strips line up, keeping all the folds symmetrical.^{[5]XResearch source} This makes a paper hat shape.
Do this at the point where the diagonal creases meet. Open the hat shape slightly. Hold the two edges at the diagonal creases.^{[6]XResearch source}
Gently pull and flatten the hat. You should end up with a diamond-shaped piece of paper.^{[7]XResearch source}
Take the bottom corner of the diamond and fold upwards toward the top. Leave about a 1/4 of an inch (0.65 cm) border between the top edge and the edge of portion that has been folded-up. Once done, flip the paper over.
Fold the bottom edge to line up with the other side. Make the same fold as with the previous step.
Pull it apart. Flatten it down, similar to Step 8.^{[8]XResearch source}
Slowly pull apart. The bottom edge will flip up on its own.^{[9]XResearch source}
Your paper ship is now complete! It’s ready to take out for a sail on the storm-tossed seas- O.K., maybe just the backyard kiddie pool.

Method 2

Method 2 of 2:

Building Your Ship to Last

Download Article

1
Fortify your boat. There are a variety of ways to make your paper ship last longer. Applying strips of tape to the bottom, all around, is a good way to increase the ship’s water resistance.
- Make two ships and put one inside the other. This will increase the water resistance as well as the overall sturdiness.
- Color the ship with crayons. The wax will help the paper resist water.
- Instead of tape, coating the bottom with plastic film wrap will provide a good barrier to the water.
- If you plan to re-use it, let the ship dry out after use. Then wrap it in plastic to protect it.
2
Use the right paper. Using lightweight paper, such as a simple sheet of rectangular computer printer paper, is best. You can use a heavier material such as construction paper, but it will be more difficult to make clean, crisp folds.
- Remember, this is essentially an origami technique. Origami traditionally uses light but durable paper. ^{[10]XResearch source} Printer, or copy, paper is a happy medium for a relatively simple fold such as a paper ship.
- You can also buy origami paper, or kami which is a product developed in Japan in the early twentieth century. It is often decorated and can be found in art supply stores. It is a bit lighter, but is fairly similar in weight to copy paper. ^{[11]XResearch source}
- You can also use newspaper, but it will be slightly less durable, and easier to tear.
Widen the bottom by pulling out the diagonal edges. Making the bottom flatter will help the ship stay afloat longer. This will also widen the surface area of the bottom for more stability.
Using two ships, one inside the other, help the ship have more buoyancy, as well as helping the paper be more resistant to water. Try placing small pebbles around the edge of the triangular middle part of the ship. The pebbles will act as ballast and help the ship keep upright. You can also adjust the weight placement of the pebbles to make the ship move in a straight line.

Community Q&A

Search

Add New Question

Question
Could I use cardboard for the boat?
Community Answer
Yes, as long as it is thin enough to fold.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 30 Helpful 67
Question
Is there another way to build a paper boat?
Community Answer
Of course. There are lots of ways. You can search how to make paper boats on the internet and it should come up with many different results.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 30 Helpful 48
Question
Can I put it on the water?
Community Answer
Of course. It is made of paper, so it will not last forever, but it is designed to float on water for at least a short period of time.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 34 Helpful 64

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Don't try to add masts and sails to make it look like a proper ship. It will only make the ship unbalanced because of the weight
Thanks
Helpful13 Not Helpful3
Familiarity with the art of origami is helpful with this project.
Thanks
Helpful13 Not Helpful3
It is recommended that you use a rectangular sheet of paper rather than a square one for this application.
Thanks
Helpful14 Not Helpful6

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Do not litter. If you play with paper ships in running outdoor water, collect your ships back after playing with them.
Thanks
Helpful61 Not Helpful18
Be careful when playing near water. Do not play with your ships in deep water, fast-running water or dirty water.
Thanks
Helpful54 Not Helpful22
Don't play near fast moving rivers. If you fall in you can be easily be swept away by the current.
Thanks
Helpful52 Not Helpful22