Download ArticleDownload Article

Do you want to build a flamethrower to impress your friends? Are you super bored? Flamethrowers are actually incredibly easy to make and require minimal tools (at least for basic, more unsafe versions). Read the steps below for instructions on making 3 different flamethrowers, each with a different level of output. Some may be more difficult to make than others.

Let's be real for a minute here guys: These things are super dangerous. You're undertaking this at your own risk. Don't make us start handing out Darwin Awards.

Method 1
Method 1 of 3:

Lighter (Minimum Flame)

Download Article
  1. How.com.vn English: Step 1 Get a lighter.
    You can buy these from most small stores.
  2. How.com.vn English: Step 2 Take off the cover.
    It should snap or pull off but you can also use pliers.
    Advertisement
  3. How.com.vn English: Step 3 Adjust the wheel.
    Turn the adjustment wheel all the way to the plus side (usually the right).[1]
  4. How.com.vn English: Step 4 Turn it back to the left.
    Lift the tab up so that it isn't touching the wheel and turn the tab all the way back to the left.
  5. How.com.vn English: Step 5 Set it down and repeat.
    You can do this several times to turn it up as much as possible.[2]
  6. How.com.vn English: Step 6 Turn it on.
    Be careful. You should get a 3"+ flame. You can readjust as necessary.
  7. How.com.vn English: Step 7 Make the flame bigger.
    Take it up a notch by spraying WD-40 or engine degreaser at the flame. Hold both far from your body and away from other people and flammable objects. It will make a HUGE flame.[3]
  8. Advertisement
Method 2
Method 2 of 3:

Can (Medium Flame)

Download Article
  1. How.com.vn English: Step 1 Place rubber bands.
    Place two rubber bands around an aerosol can.
    • You can use a can of Axe, hairspray, whatever.
  2. How.com.vn English: Step 2 Place the bracket.
    Place the wall bracket (that should already be bent into a 90-degree angle) under the rubber bands so it's held onto the can somewhat securely.
  3. How.com.vn English: Step 3 Get a sticky surface.
    Break off a bit of that plasti-tak and put it on the bottom of the candle (you can also use a lighter).
    • Alternatively, you can use chewing gum.
  4. How.com.vn English: Step 4 Attach it to the bracket.
    Attach the candle to the wall bracket using the plasti-tak or other sticky substance.[4]
  5. How.com.vn English: Step 5 Adjust as necessary.
    Line up the candle wick with the sprayer tip on the aerosol can.
  6. How.com.vn English: Step 6 Light the candle.
    Be careful.
  7. How.com.vn English: Step 7 Spray.
    Don't spray towards anything flammable. Be careful.
  8. Advertisement
Method 3
Method 3 of 3:

Super Soaker (Maximum Flame)

Download Article
  1. How.com.vn English: Step 1 Get a high quality water gun.
    It should be able to build and maintain pressure well, be made of high quality plastic, and hold a good amount of liquid.[5]
  2. How.com.vn English: Step 2 Get a metal bracket.
    You'll need a metal bracket, either flat or an L bracket depends on the gun you buy. Attach the bracket to the gun, so that the flat metal comes out parallel with the ground, about 1" below the nozzle.
  3. How.com.vn English: Step 3 Wrap the gun.
    Wrap the gun around the nozzle with tinfoil, so that only the open is exposed (and exposed as little as possible). This will help keep the gun from melting.
  4. How.com.vn English: Step 4 Fill the gun.
    Fill the water reservoir with lighter fluid.
  5. How.com.vn English: Step 5 Attach a candle.
    Attach a candle to the end of the bracket. You can use tacky, gum, or anything that isn't glue.
  6. How.com.vn English: Step 6 Light the candle.
    Light the candle using your preferred method.
  7. How.com.vn English: Step 7 Shoot the gun.
    Don't forget to pump it first.
  8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is the legal status of these improvised flamethrowers?
    How.com.vn English: Community Answer
    Community Answer
    Flamethrowers are legal in most of the US, they only have some regulations in like California. Be sensible, as throwing them at people, animals or dry vegetation is not legal and you'll get into major trouble if injuring anyone or harming the environment and causing property loss.
  • Question
    How do I prevent the flame from reaching the fuel reservoir?
    How.com.vn English: Community Answer
    Community Answer
    Fire it in shorter bursts, if it is crawling up the stream, stop firing for a moment.
  • Question
    Is it okay to use gasoline to make a flamethrower?
    How.com.vn English: Community Answer
    Community Answer
    If you can atomize the fuel (make a fine mist), then kerosene or diesel would be better. Gasoline is more flammable and more apt to climb back into the fuel tank.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If the flame goes out frequently, then move the candle down just a bit.
      • Don't use glue, because when the candle burns out, you will probably want to replace it.

      Tips from our Readers

      • In California, you must have a permit to possess a flame throwing device. You can get one from the Office of the State Fire Marshal if you pay a fee of $425 a year and pass a background check.
      • You can also use other flammable liquids like spray deodorant, spray paint, silicone lubricating spray, cooking spray, and wasp killer.
      • Always have a fire extinguisher nearby in case the flame gets out of hand!
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • An aerosol can that holds a flammable substance inside. (ex. Hot Shot wasp and hornet killer)
      • two rubber bands
      • A 90 degree angled small wall bracket( that you can bend- preferably)
      • Plasti-tak
      • a heavy-duty match or a birthday candle

      About This Article

      How.com.vn is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 51 people, some anonymous, worked to edit and improve it over time. This article has been viewed 401,552 times.
      643 votes - 87%
      Co-authors: 51
      Updated: March 18, 2024
      Views: 401,552
      Categories: Fireworks
      Article SummaryX

      To make a cool flamethrower using a simple lighter, start by taking the cover of the lighter off with your hands or with pliers. Turn the adjustment wheel all the way to the plus side, lift the tab up, and then turn the wheel all the way back to the other side. Keep repeating this process to increase the height of the flame. To make it even bigger, try spraying WD-40 or engine degreaser at the flame, being careful to aim it away from your body and away from other people and flammable objects. To learn how to make a flame thrower with a can or a super soaker, keep reading!

      Did this summary help you?

      Thanks to all authors for creating a page that has been read 401,552 times.

      Did this article help you?

      ⚠️ Disclaimer:

      Content from Wiki How English language website. Text is available under the Creative Commons Attribution-Share Alike License; additional terms may apply.
      Wiki How does not encourage the violation of any laws, and cannot be responsible for any violations of such laws, should you link to this domain, or use, reproduce, or republish the information contained herein.

      Notices:
      • - A few of these subjects are frequently censored by educational, governmental, corporate, parental and other filtering schemes.
      • - Some articles may contain names, images, artworks or descriptions of events that some cultures restrict access to
      • - Please note: Wiki How does not give you opinion about the law, or advice about medical. If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.
      • - Readers should not judge the importance of topics based on their coverage on Wiki How, nor think a topic is important just because it is the subject of a Wiki article.

      Advertisement