How to Make a Fake Belly Button Piercing

Play Video

|

Q&A

Belly-button piercings are stylish and sexy , but getting pierced can be painful and expensive, not to mention somewhat permanent. A fake piercing, on the other hand, can give you the chance to try out different styles and decide if a navel piercing is right for you. It's also a great alternative for teens whose parents won't let them get a body piercing.

It's not hard to make a fake piercing that will draw people's eyes to your midriff without giving you away. Pick out a pretty bead, choose a sparkly rhinestone, and attach it to your belly button - no one will know the difference!

Method 1

Method 1 of 3:

Making a Fake Beaded Piercing

Download Article

1
Find a silver- or gold-colored bead.^{[1]XResearch source} The bead can be plastic or metal, but it should be small enough to fit inside your belly button. You can buy inexpensive beaded necklaces at discount stores for as little as $1 and cut a single bead off with scissors.
- You can also use wire cutters and snip the post from the back of a bead earring.
2
Find a small stick-on rhinestone. The small jewels have adhesive applied to the back so it will stay on your skin.^{[2]XResearch source} You can also snip off the post of a jeweled earring stud (as long as it has a flat back) with wire cutters.
- The size of the rhinestone is up to you, but your fake piercing will look more realistic if the jewel is smaller than the bead you chose.
Advertisement
If you're using a stick-on piece, you don't need to add adhesive. If you made your own piece of jewelry, use spirit gum, nail glue, eyelash glue or body glue so the jewel adheres to your skin.
Since the back of the bead won't be visible, you can get a little creative with your adhesive. Try to place the bead in the upper part of your belly button, so that it looks like it's attached to the jewelry above.
Don't jostle or move the pieces for a few minutes while the adhesive dries. It helps to lie down while the glue dries.

Method 2

Method 2 of 3:

Making a Fake Dangling Piercing

Download Article

A small hoop or a lightweight chain are good options. You can even create your own belly-button jewelry designs using simple materials such as straight pins, beads, wire cutters and pliers.
If the earring has a hook, either snip it with wire cutters or use needle-nosed pliers to open that link or loop attached to the hook and pull it apart from the rest of the earring.^{[3]XResearch source}
3
Create your own beaded jewelry by sliding beads onto a pin. Using a straight pin with a beaded head, slide small beads onto the pin in a custom pattern.^{[4]XResearch source}
- Slide the beads over the pin in whatever arrangement you like. Remember, the pin head will be the bottom of the jewelry, so the beads should be small enough they don't slide over it. Don't make the pin arrangement longer than what you'd like dangling from your navel.
- Using needle-nosed pliers, bend the remainder of the pin so it forms a 90-degree angle. Clip the sharp end of the pin so that only about 1 centimeter of bare wire remains.
- Bend the remaining wire into a small loop using needle-nosed pliers. The loop will be the top of the belly-button ring.
The best adhesives to use are spirit gum, nail glue, eyelash glue or body glue.^{[5]XResearch source} You will find it helpful to add glue to both the jewelry and your skin, then stick them together.
5
Place a rhinestone sticker above the earring. To give the fake belly-button piercing a more realistic appearance, add a jewel about an inch above your navel. If you don't have a sticker, you can use wire cutters to snip off the post from a rhinestone earring (as long as it has a flat back) and glue the jewel to your skin.
- While the size of the rhinestone is based on your personal preference, choosing a jewel the same size or smaller than the pin head you chose will look most realistic.
Be sure you don't move around or touch the pieces for several minutes. It's also helpful to lay down flat while the glue dries.

Method 3

Method 3 of 3:

Customizing Your Belly-Button Jewelry

Download Article

Create custom fake belly-button jewelry just like you would create custom earrings. There are a variety of ways you can customize beads or create your own dangling belly-button jewelry.
Cover the bead with nail polish or a thin layer of white craft glue, then roll the bead in glitter. Let it dry completely before you attach it to your body.
3
Create dangling earrings with a variety of materials. Instead of sliding beads onto a straight pin, stick the pin through all sorts of materials.
- You can decorate a tiny Styrofoam craft ball with paint, nail polish or glitter or roll a small ball of aluminum foil and decorate it in the same way. You can even stick the pin through a small fuzzy ball.^{[6]XResearch source}
Follow the instructions to make any earring design. Just be sure and stop before adding a post or hook and instead attach the jewelry to your belly button using the instructions above.

Community Q&A

Search

Add New Question

Question
Can I use super glue to make a fake belly piercing?
Community Answer
You can use super glue to make the fake belly piercing object. Do not use super glue to attach it to your skin.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 15 Helpful 62
Question
What type of glue should I use and how long will it stay on?
Community Answer
I would use body glue, and it will probably stay on for 6 or 7 hours.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 55
Question
Is a fake piercing durable enough to last through the day at school and then track practice?
Community Answer
Moving that much and sweating will likely cause the piercing to fall out.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 8 Helpful 65

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Some stores sell magnetic or clip-on belly-button rings. These will probably stay put better, but you'll have less control over the design.
Thanks
Helpful24 Not Helpful1
If your navel is an outie, making your fake belly-button ring look realistic will be difficult. Stick to clear adhesives, and position the pieces carefully.
Thanks
Helpful12 Not Helpful5

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

If you use nail glue, pinch the skin onto the glue a bit once you put on the bead. This helps it look more realistic.
Claire’s sells a lot of clip-on stuff; you could find anything you need there, and it is cheap.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Don't use super glue because it may stick and pull your skin when you want to remove it. Sensitive skin might also react poorly to the substance.
Thanks
Helpful35 Not Helpful1
If the glue pulls and hurts when you try to remove the jewelry, apply lotion to it.
Thanks
Helpful36 Not Helpful4