How to Make a Braided Headband

Braided headbands are trendy and chic. They can cost a pretty penny at the store, but they are surprisingly easy and cheap to make. There are countless ways to make them, from using t-shirts to using scraps of fabric and elastic. If your hair is long enough, you can even braid it to look like a headband. Whichever method you choose, you are bound to end up with something fashionable.

Method 1

Method 1 of 3:

Making a 5-Strand Braided Headband

1
Cut five, narrow strips from the bottom of a t-shirt. Cut off the bottom hem first, then cut the shirt into five, 1-inch (2.54-centimeter) wide horizontal bands. Cut the bands apart apart at one of the side seams to make five strips.^{[1]XResearch source}
- Use a ruler and a fabric pen to make cutting lines, if you have to, but don't worry about making it perfect.
- For a wider headband, cut the strips 2 inches (5.08 centimeters) wide.^{[2]XResearch source}
- For a thinner headband, cut the strips ⅓ inch (0.85 centimeters) wide.^{[3]XResearch source}
Grab a fabric strip by both of the narrow ends. Give them a gentle tug, then move on to the next strip. Do this for all of the fabric strips. This will cause the strips to curl and become long tubes instead.^{[4]XResearch source}
Align the strands vertically and parallel to one other. You want to have two strands on the left, one strand in the middle, and two strands on the right. Place a long piece of tape across the top ends so that they don't slide off the table.
Cross the outer left strand over one strand, moving towards the right. Bring the middle strand over one towards the left. Cross the outer right strand over one strand, moving towards the left. Cross the middle strand over one to the right. Repeat these steps to complete the braid.^{[5]XResearch source}
Measure your head first, then add 2 inches (5.08 centimeters). Cut your braid down to this new measurement. You need this extra length so that you can knot the ends together.^{[6]XResearch source}
Take the first strand at one end of the braid, and the first strand on the other end. Tie them together in a tight, double-knot. Repeat the process for the second, third, fourth, and fifth sets of strands.^{[7]XResearch source}
Alternatively, you can weave the ends back into the braid to hide them from view. For a cleaner finish, rotate the headband so that the knots are on the inside for the headband.^{[8]XResearch source}
Advertisement

Method 2

Method 2 of 3:

Creating a Multi-Textured Headband

1
Choose your fabric and ball chain. Patterned, cotton fabric with a floral print works well for a boho-chic look.^{[9]XResearch source} For an edgier look, try a colored cording and leather instead.^{[10]XResearch source} Ball chains come in both silver and gold, so pick the one that goes the best with your color scheme.
- You can find ball chains in the beading section of an arts and crafts store. You can also use an old ball chain necklace instead.
2
Cut your fabric and ball chain. Cut two long strips out of your fabric/cording/leather that are ½ inch (1.27 centimeters) wide and about 2½ to 3 feet (0.91 m) (76.2 to 91.44 centimeters) long. Next, cut the ball chain down to 2½ to 3 feet (0.91 m) long.^{[11]XResearch source}
- You may not be able to cut your cording narrower; just focus on the length instead.
3
Tape the three strands to a table. Set the ball chain down onto the table. Make sure that it is oriented vertically, then place the fabric strands to either side of it. Cover the ends with a piece of tape so that they don't move.^{[12]XResearch source}
- For an edgier look, place the cord on one side of the ball chain, and the leather on the other.
4
Braid the three strands together. Cross the left strand over the middle one, then cross the right strand over the middle one. Keep braiding until the strands are long enough to wrap around your head, minus 2 inches (5.08 centimeters).
- If the strands are too long, cut the excess off. Remember to use wire cutters for the ball chain.
5
Glue the end of the braid to a hair tie. Thread the end of the braid through the hair tie by about 1 inch (2.54 centimeters). Glue the end down to the rest of the braid with hot glue or fabric glue. The hair tie should be caught inside the looped fabric.^{[13]XResearch source}
- You can also sew the braid instead.
6
Remove the tape from the top of the braid, and glue it to the other end. Peel off the tape from the top of the braid. Thread it through the hair tie by 1 inch (2.54 centimeters), then glue it down, just as before.
- Don't let the braid twist, otherwise it won't be comfortable on your head.
7
Wrap and glue a piece of ribbon around the ends of the braid. Cut a short piece of 1-inch (2.54-centimeter) wide ribbon. Draw a line of glue along one of the narrow edges, then place it against the end of the braid, just above the elastic. Wrap the ribbon around the base of the braid tightly, then glue down the other end. This will cover the end of the braid and give you a nicer finish.^{[14]XResearch source}
- Repeat this step for the other side of the headband.
- A black ribbon will look the best, but if you can also match the ribbon color to the hair tie instead.
Advertisement

Method 3

Method 3 of 3:

Braiding Your Hair into a Headband

1
Gather a 1-inch (2.54-centimeter) wide section of hair from behind your ear. It does not matter which side of your ear you are grabbing the section on. You will be making another one just like it.^{[15]XResearch source}
- This style works best on long hair that falls past the shoulders.
- If your hair is straight or fine, consider adding some texture with a texturizing mousse or spray. You can also use a curling iron.
Split the section into three, equal strands. Hold the strands up towards the ceiling as you braid them. Secure the end of the braid with a clear hair elastic.^{[16]XResearch source}
You will now have two braids dangling down from behind your ears.^{[17]XResearch source}
4
Comb the rest of your hair back, away from your hairline. This will help further create the illusion of wearing a headband. Simply run a brush through your hair from you front hairline towards the back.^{[18]XResearch source}
- Be careful not to snag the braids.
Take the left braid, and wrap it over the top of your head, towards the right ear. Take the right braid, and wrap it over your head as well. This time, keep it just behind the first braid.^{[19]XResearch source}
They should look like a double-strand, braided headband. If you need to, adjust your loose hair so that it is covering the bobby pins.^{[20]XResearch source}
At this point, you can leave the braids as the are. For a neater finish, however, pull off the clear elastics, and unravel the braids until you reach the bobby pins.
Advertisement

Community Q&A

Search

Add New Question

Question
Is this a good braid to make in the morning?
Community Answer
Yes, but if you are running late or don't have a lot of time, you might want to stick with a simpler hairstyle--at least until you get the hang of it. If this is your first time trying this style, it might take a little bit longer; with enough practice, however, you should be able to do it in no time.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 12 Helpful 43
Question
Which hair spray should I use?
Community Answer
A full-hold hairspray is best for making a braided headband.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 7 Helpful 18
Question
Do headband braids work with thick, wavy hair?
Community Answer
Yes, this works great with thick hair.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 5 Helpful 17

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Use bobby pins that match your hair color. If you can't find any, paint them with nail polish that does.
Thanks
Helpful0 Not Helpful0
If you are using ribbon, you can heat-seal the ends with a lighter.
Thanks
Helpful0 Not Helpful0
How much fabric you end up using depends on how big your head is.
Thanks
Helpful0 Not Helpful0