How to Make Lucky Paper Stars

Exquisite little paper stars can be used for decorations, jewelry, craft projects, and gift-giving. They're very easy to make, and they're a fun way to recycle a bit of junk mail into something colorful and decorative. If you want to make your own lucky paper stars, see Step 1 to get started.

Steps

Download Article

1
Cut a long, narrow strip of paper about 1 centimeter (0.4 in) wide and as long as whatever page you are cutting.^{[1]XResearch source}
- Instead of scissors, you can cut the paper with an Exacto knife.
2
Tie a simple knot (of the same kind that you would use to tie your shoes) at one end. Then:^{[2]XResearch source}
- Cross the ends of the strips and pull one end through the loop that forms. If you want the color from a particular end of the strip, tie the knot at the other end. Don't twist the paper, just loop it.
- Gently tighten the knot, then gently pull the knot without creasing or squeezing the strip of paper.
- When all the edges are in contact, press it down and crease. You should have a pentagon with a long end and a short end sticking out.
Advertisement
If there's a little more than a pentagon width, you can tear it off or fold it under and tuck it in.^{[3]XResearch source}
The result should be a fatter pentagon. Fold so that the color you want faces out, if the two sides of the strip are different.
If there is a little too much, fold it over or tear it off before tucking it in.^{[4]XResearch source}
^{[5]XResearch source}
7
Use the stars for display.
- Make a whole bunch of these and display them in a jar or clear glass.
- Display them mixed with confetti or tinsel as part of the party decorations on a table.
- Work a needle and thread or string through opposite corners to string them together as a garland or necklace. You could combine them with paper beads or other elements on the same string.
- You can put them on a bulletin board but consider the thickness of the corkboard.
- See that the thumbtacks do not go into the wall through the board.

Community Q&A

Search

Add New Question

Question
What size does the paper need to be?
Community Answer
Normally 1cm as width, and 28 cm as length. Printer paper would work for this.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 49 Helpful 210
Question
Can I make big lucky stars if I use a bigger paper?
Amishu Jhansal
Community Answer
Yes, just make sure that the ratio stays the same, if you increase width, you must increase length.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 45 Helpful 182
Question
Can I use scrapbook paper?
HumanBeing
Top Answerer
Yes, scrapbook paper would be good for this project. If it is on the thicker side, don't cut your strip too narrow or your completed star will be too small to puff out.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 57 Helpful 107

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Reader Videos

Tips

Fold the stars loosely, so that it's easier to puff up them up.
Thanks
Helpful60 Not Helpful13
Using a paper cutter is helpful if you'd like nice, straight strips. Use at least a ruler if you can't do a paper cutter though. If you have neither, fold the paper over and cut along the fold with scissors to get the strips as straight as you can.
Thanks
Helpful37 Not Helpful11
You can also buy the paper especially made for this at some stores.
Thanks
Helpful32 Not Helpful12

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

I like to use foil for this, but it can rip easily so you have to be careful. But you end up with a shiny silver star, which is pretty cool.
Make sure you don't used regular lined notebook paper because it's too thin and flimsy for this project. Use thick construction paper.
Try not pressing down and creasing the edges when you're making the base. That way, the base is more 3D and easier to pinch.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Take care not to nick yourself with a paper edge.
Thanks
Helpful116 Not Helpful62
Use scissors responsibly. Children should be supervised when cutting paper.
Thanks
Helpful118 Not Helpful67

Things You'll Need

Paper – magazine and catalog pages you were going to throw out are great, since they're fairly soft, thin paper and provide a wealth of bright colors. You're using narrow enough strips so that most designs will just show up as colors when you're done.
Scissors and a ruler or a paper cutter
A glass, box, or jar (optional) in which to display a collection
Needle and thread or string (optional)