How to Make Jawbreakers

Since their birth in penny candy shops in the late 1800s, jawbreakers (also known as gobstoppers) have been satisfying sweet teeth for over a century.^{[1]XResearch source} Candy lovers can enjoy a single of these exceptionally hard candies for hours, letting each layer of the sugary treat dissolve to reveal a new flavor and color. If you've already proven yourself as a champion jawbreaker connoisseur and you're looking for a new challenge, try making your own — with just a few ingredients, you can make jawbreakers to your heart's content!

Ingredients

3 3/4 cups sugar
1 cup water
Small muffin tins or oven-safe molds
Food coloring (optional)
Liquid hard candy flavorings of your choice

Method 1

Method 1 of 2:

Making Basic Jawbreakers

Download Article

1
Mix the sugar and water in a pot.
- Stir until the sugar is uniformly moist.
- If you can, use filtered water for your jawbreakers. While unfiltered tap water will work fine, the tap water in some areas has a subtle aftertaste that can very slightly affect the flavor of the final product.
2
Heat over a stove burner set to "high."
- As the ingredients heat, they will start to boil and blend together into a syrupy solution. Stir frequently — the sugar can easily burn if it's allowed to stick to the bottom of the pot.
Advertisement
3
Cook sugar to the "hard-crack" stage.
- As you boil the syrupy mixture, the water evaporates, making a thicker and thicker syrup. Your goal is to heat the mixture until almost all of the water is gone — this is called the "hard-crack" stage.
- There are several ways to determine when you've reached the hard-crack stage:
  - Use a candy thermometer — the syrup should be at 300-310^o F (149-154^o C)
  - Use a cold water test — carefully drop a small dollop of the syrup into a bowl of cold water. Let it cool for a few moments, then take it out and examine it. The syrup should have formed hard, brittle threads that crack when bent (hence "hard-crack.") If it's still soft, it needs to cook longer.^{[2]XResearch source}
4
Remove from heat.
- Don't let your syrup cook past the hard-crack stage — this will cause it to start caramelizing. Though the rich, complex flavor of caramel is great for some recipes, it's not typically used for jawbreakers.^{[3]XResearch source}
5
Stir in flavor and coloring.
- Add between ²⁄₃ tablespoon (9.9 ml) to 1 tablespoon of liquid flavoring and stir thoroughly to combine. The more flavoring you add, the stronger your candy's flavor will be.
- You may also add a few drops of food coloring at this point if desired. However, this will not affect the taste of the candy.
6
Pour the liquid into each of your molds or muffin tins.
- Though there's no "right" way to make jawbreakers, pouring your liquid more thickly will usually give a harder texture. Thin candies will be more brittle, making them easier to bite into.
7
Cool the jawbreakers in the refrigerator.
- Depending on the thickness of your candies, it can take anywhere from half an hour to two hours or longer for them to cool completely. Be patient — the cooler they get, the closer they'll get to the rock-hard jawbreaker texture.
8
When the candy has completely cooled, remove and serve.
- To get the candies out, twist each muffin tin or candy mold like you'd twist an ice tray to release its contents. Enjoy!

Method 2

Method 2 of 2:

Getting Creative With Your Jawbreaker Recipe

Download Article

1
Try making layered jawbreakers.
- Today, many jawbreakers (like, for instance, Everlasting Gobstoppers) are multilayered — if you cut the candy in half, you'll be able to see the rings made by the different layers. With a little extra work, you can get a similar effect in your homemade jawbreakers.
- To do this, start by making a batch of jawbreakers according to the step above. Next, prepare a second recipe's worth of syrup, but give it a different color and flavor than you used for your first batch.
- When the syrup is cold enough to handle, roll your cold jawbreakers in it, giving each an even coat. Put the coated jawbreakers on a piece of parchment paper and put them in the fridge to cool.
2
Add popping candy for an interesting twist.
- To give your jawbreakers a little extra "bite," try stirring a generous pinch of popping candy (like Pop Rocks, etc.) into your syrup as you add the flavoring and color. When the jawbreakers are finished, the popping candy will provide a satisfying fizz as you enjoy them.
3
Make your own custom liquid candy flavorings.
- It's worth noting that, if you're willing to experiment, you don't need to use commercial liquid candy flavorings. There are a number of ways to make your own flavorings for use in jawbreakers and other candies — nearly any sort of dense, strongly-flavored oil, syrup or liquid can potentially work.
- One cheap, easy way to make your own flavoring is to add just enough water to an individual packet of Kool-Aid powder to produce a liquid. Stir this into your mixture earlier in the cooking process than you normally would to allow the extra water to boil off.
- Another trick that works well for fruit flavors is to add a splash of fruit juice (plus a little grated zest if you have it) — as above, give the extra liquid a chance to boil off if you use this method.
4
Add sticks to make lollipops.
- The jawbreaker recipe above is very similar to that used for a wide variety of other hard candies. In fact, if you just dip a popsicle stick in each jawbreaker as it hardens, you'll have a set of lollipops once they cool — try it!
- Keeping the sticks upright while the candy cools can be a challenge, so try carefully laying them on their sides. When the candies cool, just turn them 90 degrees to get your lollipops.
5
Experiment with different-shaped molds.
- The shapes of your jawbreakers are only limited by the molds you have handy — try using differently-shaped molds to make exciting new designs!
- Getting perfectly round jawbreakers like you'd see in a store can be quite tricky. Even round molds can leave a noticeable seam around the edge of the jawbreaker. Professional candy makers use a process called "panning" which involves rolling the jawbreakers in round vats of ingredients for long periods of time to produce their round shape.^{[4]XResearch source} Though this is beyond the reach of most amateurs, if you're serious about making jawbreakers, you may want to invest in specialized panning equipment.

Community Q&A

Search

Add New Question

Question
How do I remove the jawbreakers from the muffin tin?
Community Answer
Twist the muffin tin like you would an ice tray to release its contents. If you don't have a bendable muffin tin, use a sharp knife to skim along the edges of the jawbreakers for easy removal.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 27
Question
Can I use Mountain Dew or other sodas?
Community Answer
Probably, but the flavor won't be as strong and you may have to adjust the recipe. You could try using soda instead of water and heating until it is "hard-crack."
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 10 Helpful 15
Question
What do I do if I don't have food coloring?
Community Answer
It won't affect the taste, but it will look brownish and burned.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 17

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Eat jawbreakers in moderation — because of their hardness, their high sugar content, and the time they take to dissolve, they can be especially hard on the teeth, even compared to other candies.^{[5]XTrustworthy SourcePubMed CentralJournal archive from the U.S. National Institutes of HealthGo to source}
Thanks
Helpful0 Not Helpful0
If you're giving your jawbreakers to someone else, experiment with different ways of packaging them as gifts. You can also make jawbreakers in particular colors for holidays or other special occasions.
Thanks
Helpful0 Not Helpful0
Liquid hard candy flavorings are usually sold in specialty grocers' as small bottles of brightly-colored liquid. However, if you can't find them locally, they are also available for order at online retailers like Amazon, etc.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Don't microwave jawbreakers, whether you made them yourself or not. Commercial layered jawbreakers can be especially dangerous, as the layers can heat at different rates, which can sometimes lead to a small explosion of scalding syrup.
Thanks
Helpful0 Not Helpful0
Sugar is bad for you and your teeth, do not eat to many jawbreakers, and brush your teeth after you have one. ^{[6]XResearch source}
Thanks
Helpful0 Not Helpful0