How to Make Glow in the Dark Stepping Stones

If you want to go above and beyond with a walkway, glow in the dark stepping stones are for you. These stones will look great in your yard or garden, and you can easily make them yourself. All you have to do is decide whether you want to paint stones you already have or create your own glow in the dark stones. You can even customize the stones with designs that show off your personality and style.

Method 1

Method 1 of 3:

Painting Stepping Stones

Download Article

If you are applying paint, you need a clean surface to start with. Dust and dirt under the paint will cause problems with adhesion and you will end up with flaky paint. Wipe each stone down with soap and water. Then, wipe each stone down with a rag dipped either in water, acetone, or isopropyl alcohol. Let the stones dry before applying paint.^{[1]XResearch source}
You can apply glow-in-the-dark paint in 2 common ways. You can buy spray paint and spray the stones, or you can brush the paint on. If you use spray paint, follow the directions on the can regarding time between coats and the distance the nozzle should be from the stone. If you use a brush on paint, make sure that you follow instructions regarding the drying time between coats.^{[2]XResearch source}
Advertisement
3
Allow the paint to dry. Once the paint has been applied, it will need to dry. The final dry (known as curing) will take longer than the dry times between your coats. This is because all of the solvent (the chemicals that keep the paint in liquid form) must evaporate. Avoid smudging the paint or getting it dirty before the curing process is over.^{[3]XResearch source}
- Depending on the type of paint used, curing can take anywhere from several minutes to hours. Consult the instructions on the can.
Find a good location to place your glow in the dark stones. Keep in mind that any night time lights (e.g. a porch light) will make the glow less prominent. For the most impressive glow, put the stones in a dark, open path (e.g. through a garden).
5
Observe the stones at night. Once your paint has cured, let the stone sit in the sun all day. The paint should absorb energy from the sun. It will slowly release this energy as light (much less intense than the original sunlight), which you will be able to see in the dark.
- Street lights and yard lights may make the stones seem less impressive.

Method 2

Method 2 of 3:

Making Your Own Stepping Stones

Download Article

You can place the whole bag of concrete into a wheelbarrow. Use a spade to break the bottom of the bag open, and lift the bag up. The concrete should spill out into the wheelbarrow. You may have to shake the bag a bit to get it all out.^{[4]XResearch source}
2
Mix glow powder into the concrete. Glow powder is a special chemical that is designed to absorb energy from the sun through the day. You can find powders that are made to be compatible with concrete at your local hardware store. While the ratios vary, most manufacturers recommend that you create a dry mix of 85% concrete and 15% glow powder.^{[5]XResearch source}
- For example, if you had a total of 10 gallons (38 L) of mix, 8.5 gallons (32 L) would be concrete and 1.5 gallons (5.7 L) would be glow powder.
- Choose a powder with earth aluminate versus one with a zinc base for the best illumination.
Consult the concrete bag to know how much water is needed. Pour the water in slowly, mixing as you go. When you are finished, your concrete should be a wet sludge-like consistency.^{[6]XResearch source}
4
Pour concrete into molds. Find or make a mold that is the size and shape that you want your stepping stones. Lightly coat the inside of each mold with petroleum jelly to make removing the stones easier. Mark the fill point on each mold so every stepping stone is the same thickness. Pour the concrete into each mold, then tap the edges of the molds to remove air bubbles and help the concrete settle.^{[7]XResearch source}
- Make sure you have as many molds as you wish to have stepping stones—the concrete in the wheelbarrow will dry up before you get to pour a second round.
For the fastest dry times, leave the molds in a dry, relatively warm place. It can still take 24 hours or longer for the concrete to completely dry. If you disturb the concrete before it is dry, you can cause cracks and other imperfections in your stones.
If you used a reusable mold, use a knife or other prying tool to loosen the concrete. If your mold was disposable, you can just break the mold away from the concrete. Now, your stones are ready to set wherever you want them.^{[8]XResearch source}

Method 3

Method 3 of 3:

Customizing Stones

Download Article

1
Use stencils for painted stones. One of the easiest ways to customize paint is by using a stencil. Lay the stencil down on the stone you wish to paint, and then paint over it. Any area uncovered by the stencil will be painted, and any area covered will not.
- The contrast between the painted and not painted areas will give your stone a clear, visible design.
2
Set trinkets or small objects into concrete stones. If you are making concrete stones, you can place things in the concrete. As the concrete dries, it will harden around these objects. Once the concrete has fully hardened, the objects you added will be held in place.
- You can place things like small pebbles, trinkets, small yard decorations, or personal items in the concrete. Clean the items with a mild soap solution and a small brush so you can clearly see the details.
While the concrete is still soft, you can use an object to indent the surface of the stone. This will leave an impression in the concrete and create a cast. Most commonly, this is done by placing your hand in the wet mix and creating a stone that has a cast of your handprints.

Expert Q&A

Search

Add New Question

Question
Would it be a good idea to seal the stones when they are all done, with a rock sealer? It might protect the paint longer.
Anthony "TC" Williams
Experienced Landscaper
Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.
Anthony "TC" Williams
Experienced Landscaper
Expert Answer
Yes, sealing the stones is a very good idea. Use a concrete or paver sealer or check with your local paint supply store.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 18
Question
Where do I buy glow in the dark paint or powder, for stones in my garden?
Anthony "TC" Williams
Experienced Landscaper
Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.
Anthony "TC" Williams
Experienced Landscaper
Expert Answer
One place is technoglowproducts.com. You can also do an online search for the product. Some local hobby or arts and crafts store may carry such products. Also, you can check with local paint suppliers.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 6 Helpful 19
Question
Where can I get the glow in the dark powder?
Community Answer
From a hardware, art/craft or online specialty store. Check that it has been made especially for concrete.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 22 Helpful 64

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Mix glow-in-the-dark powder with grout in order to create glow-in-the dark grout lines. Choose a sealant that doesn’t block UV light (which will activate the powder).
Thanks
Helpful29 Not Helpful22

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!