How to Make Balloon Animals: Balloon Dog, Balloon Monkey, & Balloon Swan

Download Article

Learn how to make easy balloon animals at your next party

Download Article

Balloon Dog

|

Balloon Swan

|

Balloon Monkey

|

Video

|

Expert Q&A

|

Tips

|

Things You'll Need

Want to create some basic balloon animals that will delight children or your friends? If you’re a beginner balloon enthusiast and you aren’t sure where to start, look no further! We’ll teach you how to make a dog, a monkey, and a swan to wow party-goers and acquaintances alike. So what are you waiting for? Grab your balloons and get pumping, because you’re about to amaze people with your balloon animal skills.

Method 1

Method 1 of 3:

Balloon Dog

Download Article

1
Inflate the balloon and leave a 3 in (7.6 cm) tail. Keep blowing until the air has inflated the balloon to about 3 in (7.6 cm) from the end, then stop blowing and tie off the balloon. The small “tail” that you leave will become the dog’s actual tail in the end.^{[1]XResearch source}
- Always use balloons specifically made for balloon animals. Qualatex and Betallatex balloons are great for making balloon animals.
- Always use a balloon pump to inflate your balloons.
2
Make 3 basic twists to create 4 segments. Start at the base of the balloon (at the balloon’s knot) and twist the balloon 2 times to create the dog’s snout. Make 2 more twists that are slightly shorter than the first segment to form the dog’s ears. Leave the last segment alone; this will become the dog’s body.^{[2]XResearch source}
- Hold all of the segments in 1 hand to prevent them from becoming untwisted, since they have not yet been locked.
- You can also make an extra-long snout and call your balloon animal an anteater.
Advertisement
Use your free hand to grasp the second and third segments, the ear segments, and twist them together 3 times. This lock twist will keep them from coming untwisted. Do you see the dog's head yet?^{[3]XResearch source}
4
Make 3 more basic twists for the neck and 2 legs. Make the first twist a few inches below the head to form a neck segment. Make 2 more twists below the neck to create 2 segments that are equal in length; these will be the front legs. Hold all the new segments in the same hand to prevent them from coming untwisted.^{[4]XResearch source}
- Would you rather have a giraffe than a dog? Make the neck segment extra long; the rest of the body is exactly the same.
- You can make the leg segments long or short, but they should be about the same length (otherwise, your dog might not be able to stand up!).
Fold the balloon at the twist between the 2 leg segments. Grasp the leg segments with your free hand and twist them together 3 times at the base of the neck. The legs and neck are now locked in place, so you can let go if you need to.^{[5]XResearch source}
The first segment is the dog's body, the second 2 segments will become the back legs of the dog, and the final segment is the tail. Hold them all in one hand to prevent them from becoming untwisted.^{[6]XResearch source}
7
Twist the back legs together. Fold the balloon at the twist between the two back leg segments. Grasp the segments and twist them 3 times at the base of the body segment. Take a look at your finished sculpture: it has a knotted nose, short ears, front legs and back legs and a tail that sticks straight up. Your work is complete!^{[7]XResearch source}
- Want to make your balloon dog even cuter? Use a permanent marker to give them 2 eyes and a mouth.

Method 2

Method 2 of 3:

Balloon Swan

Download Article

You can pick any color for your swan, but white or black balloons both make striking swan sculptures. Tie your balloon off to keep it inflated.^{[8]XResearch source}
Roll the ballon in on itself to put the knotted end at the center of the “paper clip” shape. Keep the tail end jutting out from the paper clip. Then, pinch the middle to hold the balloon together.^{[9]XResearch source}
Grasp the folded balloon in the middle so that you're holding 3 parts: the top of the paperclip, the bottom of the paperclip and the knot in the center. Twist the 3 parts together, making sure you catch the knot in the twist. Hold the twist to make sure it doesn't come undone. You now have 2 loops with a long neck jutting out from the center twist.^{[10]XResearch source}
Use your free hand to close one of the loops and push it up through the other one. This creates the body of the swan, with the tucked-in loop resembling folded wings and the outer loop resembling the swan's underside. Tucking in the loop also keeps the structure from coming undone.^{[11]XResearch source}
5
Pinch the long portion to create the head. Grasp the neck a few inches from the tail and use your hand to move some of the air into the uninflated tail part. This will cause the top of the neck to curve into the shape of the head. The remaining uninflated tail forms the swan's beak.^{[12]XResearch source}
- Use a marker to give your swan eyes if you’d like to.

Method 3

Method 3 of 3:

Balloon Monkey

Download Article

Leaving a shorter tail might result in the balloon popping halfway through the sculpting process, so make sure you have plenty of uninflated balloon at the end. Tie off the balloon with a knot.^{[13]XResearch source}
This will create a small segment that will be the monkey's face. Hold both segments in one hand to prevent them from untwisting.^{[14]XResearch source}
Start by making a second basic twist close to the first one so that you have a small segment in between the twists. Fold the segment so that the two twists line up. Use your free hand to grasp the folded segment and twist it 3 times to lock it in place. You've just made the monkey's first ear!^{[15]XResearch source}
A couple of inches from the first ear, make another basic twist to create a short segment. Hold it in 1 hand so that it doesn't untwist. This new short segment will be the monkey's forehead.^{[16]XResearch source}
5
Make another short fold twist. Start by making a second basic twist close to the first one so that you have a new small segment between the twists. Fold this segment so that the 2 twists line up. Use your free hand to grasp the folded segment and twist it 3 times to lock it in place. This is the monkey's second ear.^{[17]XResearch source}
- You can already see the monkey’s head starting to form during this step!
Carefully grasp the two ears by the twists at their bases. The forehead segment will be sticking out between them. Twist the ears together three times to lock them in place. The monkey's head is now complete: it has a nose, a forehead, and two ears.^{[18]XResearch source}
7
Make 3 more basic twists for the arms and neck. Make the first twist a few inches below the head to form the neck segment. Make two more twists lower down to form two segments that are equal in length. These will become the monkey's arms.^{[19]XResearch source}
- Hold all of the segments in one hand to prevent them from untwisting.
Fold the balloon at the twist between the two arm segments. Grasp the segments and twist them three times at the base of the neck segment to lock the arms and neck in place. The balloon should now resemble a monkey with a head, neck and arms.^{[20]XResearch source}
9
Make 3 more basic twists to create the body and legs. Make the first twist a few inches below the arms to form the body segment. Make 2 more twists lower down to form 2 segments that are equal in length. These will become the monkey's legs. Hold all of the segments in one hand to prevent them from untwisting.^{[21]XResearch source}
- Leave plenty of room at the end of the balloon for the tail, which should be the longest segment of all.
10
Twist the legs together. Fold the balloon at the twist between the two leg segments. Grasp the segments and twist them together 3 times at the base of the body. The body and legs are now locked in place, and the tail is hanging down from the body.^{[22]XResearch source}
- Your monkey is now complete! Make your monkey even more adorable by drawing a face on with a permanent marker.
Choose a balloon in a contrasting color and inflate it completely, then tie it off (no need to leave a tail at the end). Slide it between the monkey's arms and legs so that the monkey appears to be climbing it. Enjoy your monkey balloon animal!

Expert Q&A

Search

Add New Question

Question
I keep messing up my balloon twists; how do I get better?
Magic Suzy
Professional Magician
Suzy Seth, known professionally as Magic Suzy, is a Professional Magician based in Tampa, Florida. Known as Magic Suzy, she has over 20 years of experience as a magician, specializing in family-oriented comedy magic shows that entertain both kids and adults. She brings her signature show, The Magic Suzy Show, to kids’ birthday parties, school assemblies, PTA fundraisers, preschools, summer camps, and other private events. Her work has been featured on local TV stations in Tampa. Before that, she worked as an entertainer on Princess Cruises.
Magic Suzy
Professional Magician
Expert Answer
To excel in the art of balloon animal making, commit yourself to consistent practice and refine your manual dexterity. Begin by selecting a specific design to focus on, such as a dog or a swan, and ensure you have an ample supply of balloons in various colors and a hand pump for inflation. Start with mastering fundamental twists like the loop twist and pinch twist, following online video tutorials or in books to grasp essential techniques. Embrace failure as part of the learning process, learning from your mistakes and persistently practicing to refine your skills. Seek feedback from peers and experiment with new designs to develop your own style. Stay patient and persistent, understanding that progress takes time, but with dedication, you'll eventually twist balloons effortlessly and with precision.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 0
Question
How do I tie a balloon?
Community Answer
Wrap it around your two fingers first, and then swoop it around in between your two fingers, then pull your fingers out and you will have a knot.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 17 Helpful 57
Question
How do I make a balloon ring?
Community Answer
Just tie the two ends of a long balloon together and put it around your finger. If it's too big, use a smaller balloon.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 29 Helpful 37

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Store balloons in an air-tight container, as latex deteriorates when exposed to air.
Thanks
Helpful3 Not Helpful0

Tips from our Readers

The advice in this section is based on the lived experiences of How.com.vn readers like you. If you have a helpful tip you’d like to share on How.com.vn, please submit it in the field below.

Put on gloves before tying or twisting balloons. They're optional, but wearing gloves helps eliminate the squeaky noises from the balloon. This will also lessen the chance of accidentally popping the balloon with your nails or jewelry.
Try finding strong balloons. Some of the cheap ones from the dollar store may easily break or pop.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!