How to Kill Bermuda Grass

Bermuda grass, also known as devil’s grass, couch grass, and dog’s tooth grass, is an invasive species of grass common in many parts of the world. If allowed to grow unchecked, Bermuda grass can take over in no time. The secret to stopping it in its tracks is to completely eradicate the fast-spreading root system. One of the most effective ways to accomplish this is by spraying it with a powerful herbicide like glyphosate until it turns brown and begins to die off. If you’d rather not resort to using harsh chemicals on your lawn, try smothering the grass with a layer of cardboard and mulch, burning it out through solarization, or simply stripping it by hand.

Please note: The WHO considers glyphosate to be a probable human carcinogen. Its use is prohibited in some states and countries. Please check with your local laws and use caution if handling this chemical.

Method 1

Method 1 of 5:

Smothering the Root System with Cardboard

Download Article

1
Pull up the heaviest growth by hand. Before you can choke out the creeping grass, you’ll need to remove as much as possible from the affected area. Grab a handful of leaves near the soil and pull them up firmly until you dislodge the underlying root system. Clearing the ground will give you a head start over new growth, making your cover more effective.^{[1]XResearch source}
- Use a leaf bag or wheelbarrow to dispose of the stripped Bermuda grass to prevent spreading small pieces to other parts of your lawn. You should throw it in the trash rather than the compost in order to prevent it from spreading.
- If you don't want to hand pull the grass, you could try mowing the lawn very short, which will help.
2
Cover the bare patch with 2-3 layers of cardboard. The cardboard acts as an insulator to keep the root system cut off from sunlight, moisture, and nutrients. For the kind of growth that pops up on most lawns, 2 stacked sheets ought to be enough. If you have a serious overgrowth problem, it may be necessary to use 3 layers.^{[2]XResearch source}
- Most home improvement centers sell parcels of cut cardboard for a few dollars apiece. For a more economical alternative, look for boxes that have been thrown out or recycled.
- Overlap the edges of each section to keep new grass from popping up between the cardboard.
- If you don't have cardboard, you could use several layers of wet newspaper instead.
- You might also have success using landscaping fabric in place of cardboard to achieve the same effect in areas with sparse ground cover.^{[3]XResearch source}
Advertisement
3
Shovel mulch on top of the cardboard. Pile the mulch about 5-6” thick. That way, you’ll still be able to plant smaller flowers and shrubs without having to risk exposing the root system of the Bermuda grass. Once the mulch is in place, tamp it down lightly with the flat edge of a shovel or trowel to compact it.^{[4]XResearch source}
- Any conventional gardening mulch will do, or go with an all-organic mixture of arborist’s waste and compost.
4
Allow up to 2-6 months for the cover to finish off the roots. In the meantime, avoid disturbing either the mulch or the underlying cardboard as much as possible. After an extended time without water, sunlight, and nutrients, the Bermuda grass will no longer be able to survive.^{[5]XResearch source}
- Light cover will typically be wiped out within a couple months—thicker patches may require a little more patience.^{[6]XResearch source}
- If you want to see how the buffer is working, dig down to a small section of the cardboard and peel it back so you can take a peek underneath.

Method 2

Method 2 of 5:

Choking out Bermuda Grass with Landscaping Fabric

Download Article

1
Remove as much grass as you can. Mow the Bermuda grass down close to the ground, or pull out small sections by hand. Doing away with the bulk of the grass slows its growth considerably, giving the landscaping fabric the time it needs to be effective.^{[7]XResearch source}
- Shorter grass is less likely to cause uneven bunching beneath the fabric, as well.
2
Place a sheet of landscaping fabric over the affected area. Unroll the sheet and stretch it out over the part of your lawn or flowerbed where growth is heaviest. Make sure the sheet is lying smooth and flat. Landscaping fabric is the best ground cover option for broad areas where Bermuda grass is coming in thick.
- Cut the sheet as needed to fit better over narrow or oddly-shaped areas.
- Be careful not to tear, wrinkle, or damage the landscaping fabric in any way while you're handling it.^{[8]XResearch source}
3
Cut holes in the landscaping fabric to make room for your plants. Use a pair of scissors or a utility knife to open up the fabric enough to accommodate whatever you may already have growing. If you think you might want to add new plants in the future, wait until you're actually ready to plant to make holes for them. This reduces the number of places where new grass might come up.^{[9]XResearch source}
- Don't make the holes any bigger than they need to be to fit around your plants. If you do, you may soon discover that new Bermuda grass has sprouted in the intervening space.
- Only cut holes for shrubs and other perennials. Caring for annuals forces you to remove the landscaping fabric too frequently.
4
Cover the landscaping fabric with a layer of mulch. Spread the mulch 4–6 inches (10–15 cm) thick. This should be deep enough to allow you to plant new additions later. Leave 2–3 inches (5.1–7.6 cm) around the base of your plants to avoid crowding the roots and stem structures.^{[10]XResearch source}
- Select a mulch mixture that contains the moisture and nutrients your existing plants need to flourish.
5
Inspect the area around the fabric periodically for new grass. The dense material will stifle the underlying root growth within about 6-8 weeks. In the meantime, keep an eye on the edges and openings to make sure no new grass has found its way through. Strip any stray leaves you happen to come across manually.^{[11]XResearch source}
- Landscaping fabric is a quicker alternative to cardboard-and-mulch ground cover. However, it can create more opportunities for stubborn grass to continue spreading if not correctly installed and maintained.
- You should not plant a lawn over landscaping fabric.

Method 3

Method 3 of 5:

Solarizing Bermuda Grass

Download Article

1
Mow the Bermuda grass. Clip the grass just above the level of the soil to remove as much growth as possible. The less you have to contend with starting off, the easier it will be to knock out.^{[12]XResearch source}
- Hand-strip or run a weedeater over narrow sections where a lawnmower won’t fit.
- This method tends to work best in the summertime, or in regions with hot, dry climates that receive an abundance of direct sunlight.
2
Stretch a sheet of clear plastic over the overgrown patches. Lay the plastic flat over the affected area, making sure there are no wrinkles or creases. The transparent plastic will magnify the sun’s rays, harnessing its heat to literally burn out the thriving grass. For larger areas, it may be necessary to use multiple overlapping sheets.^{[13]XTrustworthy SourceUniversity of California Division of Agriculture and Natural ResourcesExtension program of the University of California system devoted to educating and improving local communitiesGo to source}
- If necessary, cut the sheeting to the correct size and shape to fit the part of your lawn overrun by the Bermuda grass.
- Gardeners and landscaping specialists often referred to the process of using concentrated UV light to wipe out invasive species as “solarization.”^{[14]XResearch source}
3
Secure the perimeter of the plastic. Tack down the loose edges with metal gardening stakes, or place heavy stones along the length every few feet. When the plastic is properly anchored, you won’t have to worry about scavenging animals or sudden gusts of wind pulling it up.
- To make doubly sure the plastic stays put, bury the edges under 3–4 inches (7.6–10.2 cm) of topsoil.^{[15]XTrustworthy SourceUniversity of California Division of Agriculture and Natural ResourcesExtension program of the University of California system devoted to educating and improving local communitiesGo to source}
4
Leave the plastic in place for 4-6 weeks. Every day, the intense heat and light will fry the grass a little more. The remaining leaves dry out and turn brittle, eventually leading to the death of the entire root system. All you have to do is carry on with your gardening as usual and make sure the plastic isn’t damaged or loosened.^{[16]XResearch source}
- One benefit of using a plastic cover is that you’ll be able to monitor its progress without having to temporarily remove it.

Method 4

Method 4 of 5:

Removing Bermuda Grass by Hand

Download Article

You may have to go over the heaviest growth a few times to prepare them for excavation. Clearing away overgrown areas beforehand makes it easier to get at the roots without losing an excessive amount of soil.
2
Dig out the grass below the root. Use a hand trowel to agitate the soil well below root level. Then, pull out the entire root structure in one piece—it should give way with little resistance. Throw the uprooted clumps into a plastic leaf bag or wheelbarrow to keep it away from the ground.
- Any live roots you miss may find their way back into the loose soil and start the problem up all over again.
- If you’re worried about losing precious soil, place the clumps on a tarp to dry in the sun for a full day, then shake off the soil clinging to the roots and return it to your garden.^{[17]XResearch source}
3
Sift the soil beneath the grass to eliminate the remaining roots. Inspect the turned soil closely for any root or leaf fragments that may have been left behind. Pick these out by hand whenever you come across them. Make sure there are no visible traces left when you're done.^{[18]XResearch source}
- Keep a close watch on your lawn or garden in the coming weeks to look for signs that a new crop of Bermuda grass might be replacing the old.
- Digging out a sea of Bermuda grass one handful at a time can be tedious, but it’s one of the most meticulous and cost-effective ways to guarantee that you’ve gotten rid of it for good.

Method 5

Method 5 of 5:

Applying a Chemical Herbicide

Download Article

1
Purchase some glyphosate. Glyphosate, an active ingredients in weed killers like Roundup, is a popular choice for halting the spread of invasive ground covers like Bermuda grass. Look for the herbicide at your local gardening store or home improvement center. It is typically sold as a spray, making it easy to coat an entire section of the lawn with relative ease.^{[19]XTrustworthy SourceNational Pesticide Information CenterOrganization run by Oregon State University providing objective, science-based information about pests and pesticidesGo to source}
- Keep in mind that glyphosate is not a selective herbicide—this means that it's harmful to any type of plant it comes into contact with, not just weed-like species like Bermuda grass.
- Remember that glyphosate is toxic, so you should use it with care. Make sure that you follow all of the instructions on the label and wear protective equipment.
2
Water your lawn thoroughly 1-2 weeks before applying the herbicide. Sweep a garden hose on low pressure over the Bermuda grass twice a day for just long enough to wet it. A good watering helps the leaves grow green and lush. This is desirable because chemical herbicides are often absorbed through the leaves rather than the roots.^{[20]XResearch source}
- If you use a sprinkler system for irrigation, set it to douse the grass in regular intervals.
- The best time to use herbicides to beat back belligerent Bermuda grass is during the spring and summer months, when the leaves are readily soaking up the most nutrients.
3
Spray the Bermuda grass with the glyphosate. Coat the affected area evenly with a heavy misting of the herbicide. As it soaks into the leaves, it will begin to break down the enzymes the Bermuda grass relies on to grow. Allow the grass to dry naturally, and avoid mowing or irrigating for the next several days.^{[21]XResearch source}
- Follow the instructions on the label carefully to make sure you’re deploying the chemical safely and correctly.^{[22]XTrustworthy SourceNational Pesticide Information CenterOrganization run by Oregon State University providing objective, science-based information about pests and pesticidesGo to source}
- It’s a good idea to wear gloves and a strap on a facemask or respirator to protect your airways when working with glyphosate.
4
Repeat as many times as needed until the grass dies off. Bermuda grass is a particularly persistent and resilient species, which means one round of herbicide will rarely do the trick. Continue treating your lawn once a week to combat the grass’s ability to spread. You may need to repeat the process up to 5 times to neutralize it completely.^{[23]XResearch source}
- Look for Bermuda grass to dry out and begin turning brown as it dies.
- Be sure to survey other places nearby where Bermuda grass may be growing unseen.
- Keep in mind that using herbicides will make it difficult for future plantings to thrive. It's best to wait at least 2 months before planting anything in treated soil.

Community Q&A

Search

Add New Question

Question
How do I destroy Bermuda grass permanently?
Ninox
Top Answerer
The best method is mechanical: dig the soil with a plow or a garden fork in the spring, then a harrow or a hoe. Repeat if possible in the summer. If there are sprouts the next year, you need to start again.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 13 Helpful 4

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

For the sake of your lawn’s health, it’s best to start with the least destructive solution first (such as stripping or smothering) and work your way up to more intensive methods from there.
Thanks
Helpful0 Not Helpful1
Frequent mowing may help slow the spread of Bermuda grass by keeping the seed head from forming.
Thanks
Helpful1 Not Helpful0
If you’re not having any luck exterminating Bermuda grass on your own, call a lawn care specialist to come out and size up the problem.
Thanks
Helpful0 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Even after Bermuda grass is removed, spores from nearby patches can easily re-seed the cleared section. This means that it may be necessary to keep clearing areas over time before the grass is completely eliminated.
Thanks
Helpful2 Not Helpful1