How to Keep Your Hair Healthy when You Straighten It Every Day

Straightening your hair can give it a smooth, sleek look. But do it too often without taking proper care of your locks, and you’ll be left with dry, heat-damaged hair that’s the exact opposite of what you were going for. It is possible to straighten your mane every day and keep it from turning into a frizzy mess. Some of the most important steps come before the flat iron ever hits your hair.

Part 1

Part 1 of 3:

Choosing Products that Keep Your Hair Healthy

Download Article

1
Purchase a heat protector. You will commonly find heat protector sprays made specifically for use with flat irons; there are also numerous creams and serums on the market, and some mousses contain heat protection.
- Some frequently recommended choices included Living Proof’s Straight Spray, Moroccan Oil (for thick or coarse hair), or products made with silicone.
2
Buy a “smoothing” shampoo and conditioner. While these won’t make your hair straight, they can add moisture to your hair and therefore help to prepare it for the process of straightening.^{[1]XResearch source}
- Alternately, you may want to try a strengthening shampoo if you find that frequent straightening makes your hair weak
Advertisement
Typical hairbrushes, which are made of nylon and plastic, cause static. But a brush made boar bristles and nylon will give your hair shape and polish and eliminate the fly-aways.^{[2]XResearch source}
4
Consider a hair moisturizer. These products will help keep your hair healthy by increasing moisture. Since they may make your hair oilier or heavier, try using just once a week.
- Some options include Luster’s Pink Original Oil Moisturizer and Aveda’s Dry Remedy.
5
Find a quality flat iron. A quality flat iron will be made of ceramic, tourmaline, or titanium. It should have multiple temperature settings so that you can choose what’s right for your hair’s texture and thickness.^{[3]XResearch source} These irons may be in the pricier range, but most very inexpensive flat irons only offer a single setting which is too high (usually 450 degrees) and will damage your hair with time.
- Ideally, you want to use a flat iron that has a temperature gauge with numbers rather than simple On, Off, Low, and High settings. This way you can gauge exactly how much heat your hair is getting.^{[4]XResearch source}
- Find an iron that is an inch and a half wide or smaller. Irons larger than that won’t be able to get closer enough to your scalp.^{[5]XResearch source}
- Ceramic plates ensure that the heat is evenly distributed across your hair as you straighten, and ceramic is good for most hair types and textures. Stay away from “ceramic coated” flat irons, which can dry out your hair.^{[6]XResearch source}
- If your hair is curly, however, you may need gold or titanium plates.^{[7]XResearch source}

Part 2

Part 2 of 3:

Preparing Your Hair

Download Article

1
Keep hair trimmed. Damaged hair will only become more damaged as you put it through the daily straightening process, and you won’t be able to get the sleek look you’re after. If you’ve got split ends or inches of damage, start fresh by having your stylist cut them off.
- If you really don’t want to cut your hair, it may be possible to repair some damage over time with products containing oils and moisturizers. This is not a quick-fix, though—it could take two to three months to see improvements.^{[8]XResearch source}
Use your smoothing (or strengthening) shampoo and conditioner and rinse them well.
3
Apply your heat protector. Depending on the product(s) you choose, you may need to apply it while your hair is still wet. Some products direct you to use them on damp hair, while others are for dry hair and you should apply them immediately before using the flat iron. Whatever the case, be sure to follow the directions on the packaging for best results.
- Use only as much product as you need for your specific hair type and length. Using too much product could result in hair that is weighed down and looks greasy, rather than sleek and shiny.
Allowing your hair to air/towel dry for at least part of the time will reduce the amount of heat—and thus drying—endured by your hair. If you are able to straighten and style your hair to your satisfaction after allowing your hair to completely air/towel dry, this is a great option for reducing damage.
5
Blow-dry your hair. Blow-drying your hair adds more heat, which can cause additional damage, but many people who straighten their hair also need to blow it dry to get the look they desire.
- To create volume, blow-dry by lifting at the roots.^{[9]XResearch source}
- If you have thick hair, you will want to apply tension with a brush as you dry—this will help to get the hair as smooth as possible.^{[10]XResearch source}
- Do not attempt to straighten your hair until it is absolutely dry. If you hear a sizzle, stop!^{[11]XResearch source}

Part 3

Part 3 of 3:

Straightening Your Hair

Download Article

1
Set the right temperature. To avoid damaging your hair, set the flat iron to the lowest temperature that will work for your hair. This temperature will depend on the specific qualities of your individual hair.
- The finer your hair, the lower the setting you should go with.^{[12]XResearch source} For fine or very damaged hair, use the “low” setting or 250–300 degrees. For medium (average) hair, use a mid-range setting or 300–350 degrees.^{[13]XResearch source}
- Even if you have very thick or coarse hair, you should be able to use a setting below the very highest one. Try 350–400 degrees if your flat iron has a temperature gauge.^{[14]XResearch source} Experiment with settings in the middle–high range before opting for the very highest one because repeatedly using that amount of heat can be very damaging to your tresses.
- If you have chemically processed hair, then your heat tolerance will be reduced. ^{[15]XResearch source} The same goes for badly damaged hair.
2
Section your hair. Divide your hair into sections of about a half an inch to two inches. Pin or pull the top part of your hair out of the way and begin with the pieces underneath, near the nape of your neck.^{[16]XResearch source}
- The more hair your have, the more sections you will need.
- Don’t try to straighten your hair by randomly grabbing pieces from all over your head; this will take forever and you’ll end up with an uneven looking result.
3
Begin straightening. Place the hot flat iron on a section of hair and smooth it down from top to bottom. You should start about a half an inch from your scalp in order to maintain some volume.^{[17]XResearch source}
- Apply some tension as you go from top to bottom so that you can get the desired straightness.^{[18]XResearch source}
Don’t let the straightener linger on any one section of hair for more than 3 or 4 seconds, as doing so will damage and possibly singe the hair.^{[19]XResearch source}
5
Repeat for other sections. Straighten the various sections of your hair, moving from the sections underneath to the middle sections of your hair.
- Try not to go over the same section of hair multiple times, as this increases the likelihood of damage to those particular strands of hair. If you have curly hair, however, you will most likely have to go over your hair multiple times to get it to become straight.
Once you get to the top section of your head, place the flat iron as close to your scalp as you can, and smooth it through your hair. This will help you to achieve a sleek finish.^{[20]XResearch source}

Community Q&A

Search

Add New Question

Question
Will my hair break if it is straightened once a month, even with trimming, shampooing, and conditioning?
Community Answer
No. If you only use it once a month, your hair will be completely fine. Don't worry.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 2 Helpful 38
Question
Will my hair be okay if I use a straightening iron set once a week, using proper treatment, and have my split ends trimmed?
Community Answer
Mostly. Make sure you're using strengthening and moisturizing hair product and heat protectant.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 32
Question
What happens when I hear a sizzling sound from wet hair when straightening it?
Community Answer
The water is boiling and evaporating. This causes a lot of damage to your hair.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 9 Helpful 83

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Reader Videos

Tips

Use your flat iron only on clean hair—this will ensure that your style lasts longer and that the heat doesn’t combine with product build-up to damage your hair.^{[21]XResearch source}
Thanks
Helpful0 Not Helpful0
It may be a good idea to go over your technique with your stylist; even if you’ve been straightening your hair on your own for years, s/he may be able to offer ways to improve your method or advice about new products that will help to keep your hair healthy.^{[22]XResearch source}
Thanks
Helpful0 Not Helpful0
Once your flat iron has cooled, you should clean it with an iron cleaner and lukewarm water. This will ensure that no product builds up and gets into your hair. ^{[23]XResearch source}
Thanks
Helpful0 Not Helpful0