How to Iron Pants

Many of today’s fabrics come in wrinkle-free varieties, but tried-and-true pant material such as wool, denim, and cotton still require ironing to get rid of creases and folds. To do this, use the correct heat setting on your iron. Start by ironing the pockets and waistband, then smooth over the legs of your pants. If you need to create or fix a crease, fold your pant leg and iron on either side. When you are finished, hang or fold your jeans to put them away.

Part 1

Part 1 of 3:

Prepping Your Surface and Iron

Download Article

1
Check the tag of your pants to ensure you can iron the material. Washing instructions are listed on the garment tag of your pants. If it is unsafe to use an iron on your pants, it will list this with the washing instructions. The garment tag also explains what heat setting to use when ironing your pants.
- You can iron pants made from cotton, corduroy, denim, linen, nylon, polyester, or wool, for instance.
2
Use an ironing board for best results. While you can iron on nearly any flat surface, an ironing board makes it easy to smooth away any wrinkles. Adjust the ironing board to a comfortable height, and make sure the legs are locked before you start ironing.
- For instance, you can place your pant leg around the narrow end to iron to remove stubborn wrinkles.
- Alternatively, use a table with a fire-resistant tablecloth if you don’t have an ironing board handy.
Advertisement
3
Fill up the steam compartment on your iron with fresh water. Most irons have a small water fill-up tank located on the backside of the iron. Look for the plastic compartment towards the top of the iron. Then, use water from your faucet to fill up the vessel to the designated fill line.^{[1]XResearch source}
- The water creates steam as you iron, helpful when eliminating folds or wrinkles.
4
Choose your desired temperature setting. Most irons indicate temperature based on the material of your pants. Turn on the iron, and then adjust the dial or indicator to the temperature you’d like to use.
- For instance, wool pants should be ironed on a lower temperature than cotton pants.
- Denim pants require a high heat setting and steam.

Part 2

Part 2 of 3:

Removing Wrinkles and Creases

Download Article

1
Start by ironing the pockets to prevent further wrinkles. If your pockets are wrinkled and you iron over them, you can easily create more wrinkles. To prevent this, pull the pocket inside out, and press it flat with the iron. Do this for both of the front and back pockets.^{[2]XResearch source}
- This is an easy trick to help speed up the ironing process.
2
Smooth out the waistband and top section. Place your iron across the waistband, and let it sit for 2-5 seconds. Then, lift up on the iron, rather than moving it across the top. This helps your pants lay flat. Once the waistband is wrinkle-free, you can tuck the pockets back inside your pants.^{[3]XResearch source}
- Do this for the front and back of the waistband.
3
Lay your pants lengthwise across the ironing board to iron the legs. Move the iron back and forth across 1 pant leg at a time, starting from top to bottom. Continually move the iron across the pant leg until the fabric is free of wrinkles or creases. Your pants should be parallel with the ironing board when you do this, and both legs should face the same direction. ^{[4]XResearch source}
- Don’t forget to iron the front and back of your pants!
4
Fold your pants at the crease to easily iron it. Many classic dress pants have a crease down the center of the leg. To create this or follow your existing fold, lay 1 pant leg on the ironing board so that the inseams are directly over each other. Press the iron down at the top and bottom of the leg, and then fill in space by pressing the rest of the crease between the 2 iron points.^{[5]XResearch source}
- Ensure the inseams are lined up as you do this to create a smooth, straight crease.
- Your crease should stop approximately at the bottom of the pockets on the front of the leg.

Part 3

Part 3 of 3:

Hanging or Folding Your Pants

Download Article

Before you hang or fold your pants, let them sit on your ironing board for a few minutes until they are cool to the touch. If you fold your pants before they cool, you can create additional creases or wrinkles.
2
Hang your pants to keep them wrinkle-free. If you have a pants hanger, you can simply secure each side to the waistband of your pants. If using a shirt hanger, fold the pants in half. Then, drape the pants over top of the bottom of the hanger, and place the hanger in your closet.^{[6]XResearch source}
- If there is a crease, fold the pants along the crease.
- If there is not a crease, you can fold them in half long ways.
3
Fold your pants to store them in a dresser or drawer. Hanging is the best way to ensure your clothes don’t get wrinkled, but you can also fold up your pants and store them elsewhere. Bring the hem of the pants to the waistband to fold them in half. Then, place them in your closet.^{[7]XResearch source}
- Alternatively, fold your pants in thirds if you need to save space. Bring the hem of the pants towards the crotch, then fold the waistband to the folded edge you just made.

Expert Q&A

Search

Add New Question

Question
Is it better to steam or iron dress pants?
Susan Stocker
Green Cleaning Expert
Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices.
Susan Stocker
Green Cleaning Expert
Expert Answer
That depends if you want tight creases and sharp lines. If that's the case, then ironing is definitely the best option, but it requires more skill. Steaming can work in a pinch, but it won't look as professional.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 5

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Things You’ll Need

Pants
Ironing board
Water
Hanger (optional)
Dresser or closet

Tips

Most pants can be worn 2-3 times in between washes, as long as they aren’t dirty or stained.
Thanks
Helpful5 Not Helpful1
If you are concerned about seeing iron marks or shine on your pants, simply turn them inside out before you iron them. This is a good idea for wool pants, for instance.
Thanks
Helpful2 Not Helpful0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

If you leave the iron stationary in 1 spot for too long, you can burn or damage your pants.
Thanks
Helpful3 Not Helpful0
Handle your iron with care to prevent serious burns or fire. Be careful when operating an iron, and do not leave it turned on while unattended.
Thanks
Helpful1 Not Helpful1