How to Install Wood Stairs

To install a staircase that will be functional, decorative, and safe, certain guidelines must be observed. The type of material to choose is a primary consideration. While stairs have been constructed using a variety of materials over the years, wood stairs remain the most common. Here's some suggestions on how to install wood stairs.

Steps

Download Article

1
Establish the perimeters of the space. Measuring the area where the stairs will be constructed is the best way to determine the kind of wood staircase you need. If there is plenty of space, you can choose a traditional split level with a landing, or a straight set of stairs.^{[1]XResearch source}
- For a small, or more crowded area, you may need to install a spiral staircase. For the purpose of this article, we will choose the simplest, a diagonal up and down wood staircase.
If possible, keep the lowest step away from doors or other obstacles such as vents, or busy passageways. The staircase can add beauty to a home as long as it isn't located in an inconvenient part of the room. Ideally, the staircase should be placed against a wall, which will give it more stability.
Advertisement
With 1 person on the floor, and another on a ladder, use a pencil with a straight edge or chalk line to mark a diagonal line for the stringer. The stringer is the part of the stairs that the steps, or threads, and risers will be attached. The risers are the vertical pieces perpendicular to the threads.^{[2]XResearch source}
You will need 2 stringers and boards for the threads, as well as the risers, which can be purchased precut at a lumberyard. Ensure that you measure for the correct length and width. Avoid stringers and lumber for the threads and risers that is warped or splitting.
5
Install the stair stringers. With the help of at least 1 other person, place the stringer against the line on the wall. Place a level on the stringer where the thread will be attached. Locate the horizontal studs in the frame inside the wall.^{[3]XResearch source}
- Using a framing hammer, nail the stringer to the wall studs, making sure each nail is securely in the stud. Further secure the stringer with braces all the way to the floor.
- Align the second stringer for the correct width and height. The second stringer should be supported by a standard frame wall. Brace the wall under the stringer and secure with framing nails.
Place the precut threads across the stringers and fasten with nails. Nail the precut risers vertically, between the threads to the stringers.^{[4]XResearch source}
Fasten entire assembly to the stringers and to the wall at the top of the stairs.
^{[5]XResearch source}

Community Q&A

Search

Add New Question

Question
What is the angle or pitch of the stair stringers?
Community Answer
Store-bought is 45-degrees. Legally the pitch needs to be 39-45 degrees.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 4 Helpful 6
Question
When would I need to get the building inspector look over the new set of stairs?
Community Answer
As soon as they're done temporarily or as soon as the stringers are installed. This provides the inspectors everything they need to know.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 1 Helpful 2
Question
What is the normal measurement for how much the stair nose should stick out?
Community Answer
1.75 cm is the ideal, 3.8 cm is the max, and they should be rounded. Outside of this range, the stair is more dangerous and uncomfortable. The "bullnose" as it is called allows for the placement of the heel or toes slightly below the next/previous stair edge, which is more natural due to the way we walk on steps.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 0 Helpful 1

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Utilize the space under the wood staircase for storage or a closet.
Thanks
Helpful0 Not Helpful0
For a professional appearance, use custom made railing and spindles.
Thanks
Helpful0 Not Helpful0