How to Install Snow Chains on Tires

When driving in snowy or icy conditions, snow chains can be extremely helpful for safe handling and control. On steep roads or in mountainous terrain, they may even be required to travel at all. Although installing and removing snow chains may look intimidating, the basic idea is really simple. Fit the chains over your tires, drive forward slowly, and tighten them up. They can be difficult to install during bad weather, so putting your snow chains on your tires before you reach snowy roads will make things much easier.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Part 1

Part 1 of 2:

Putting on the Snow Chains

Download Article

1
Get snow chains that match the size measurements on your tires. Find out the size of your tire in order to know which snow chains you need for your vehicle. Look along the outside edge of your tires for a long string of letters and numbers. You'll need this information when you go shopping for snow chains.
- The first number tells you the tire width; the second numbers tells you the tire height ratio (the ratio of the sidewall height to the width); and the third number tells you the diameter of the wheel, usually denoted in inches.^{[1]XResearch source}
- The chain packaging will indicate which size tires they fit.^{[2]XResearch source} If you have questions, don’t be afraid to ask a store employee for help.
Undo any twists or kinks in the metal so that the chains are hanging freely in a web shape. This process can take longer than you might expect, so it’s best to be prepared and put your chains on before they are actually needed.
Advertisement
3
Lay the chains on the ground next to the tires you are installing them on. If your vehicle is front-wheel drive, put the chains on both front wheels; if your vehicle is rear-wheel drive, put the chains on both rear wheels. For 4-wheel or all-wheel drive, install the chains on all 4 tires.^{[3]XResearch source}
- You may opt to put chains on all four tires of a front or rear-wheel drive vehicle for added safety and control during extreme weather conditions.^{[4]XResearch source}
4
Fit the snow chains over the top of the tire you are installing them on. Make sure that your car is in park and the parking brake is engaged before you begin. Straighten the length of the chains over the top of the tire so that it hangs down along the sides. It should cover about three-quarters of the tire. Make sure that the chains running from side-to-side across the width of the tire are straight as well.
- Tuck the chains between the bottom of the tire and the ground to hold them in place when you drive forward.
- Some types of snow chains will have rings fastened to the chains. These rings go along the inside of the wheel and should rest on the bottom of the tire, near the ground, during installation.^{[5]XResearch source} This type of chain will require you to get under your car in order to install them, and may require a little adjusting to make sure they are on straight.
Check your surroundings before disengaging the parking brake. Then put your vehicle in gear and roll forward slightly. Remember, only a small portion of the tires are unfitted, so only drive forward a little bit.^{[6]XResearch source}
6
Turn the wheel toward the inside of the vehicle for easier access. When you’ve determined that you've pulled forward enough to ensure full coverage of the tire, turn the wheel toward the inside of the vehicle. This will give you better access to the connections and make it easier to finish securing the chains.
- If you are installing the chains on the left tires, turn your steering wheel to the right to point the tire inwards.
- If you are installing the chains on the right tires, turn your steering wheel to the left to point the tire inwards.
- Put the car in “park” and engage the parking brake once more.
7
Connect the chains together to cover the remaining portion of the tire. Starting from the inner part of the tire near the axle, connect the two hooked edges. Then connect the hooked edges on the outside portion of the tires.^{[7]XResearch source} Rotate the closer link or tightening cam to tighten the chains so they are as snug as possible.^{[8]XResearch source}
- Traditional chains can be tightened with a link-tightening tool, but try not to use these tools on link unit chains.
- A bungee cord with hook fasteners is a common way to make chains fit even tighter over your tires, especially if the chains don't have built-in tightening cams. These can usually be bought anywhere where snow chains are sold.^{[9]XResearch source}
Look to make sure that the chains are going mostly straight across the width of the tire. If the inner portion of the chain is tight, but the outside is loose, you will need to adjust the chains on either side to make sure they are straight and then re-tighten them.^{[10]XResearch source}
9
Repeat the exact same process for the other tire(s) on your vehicle. Fit the chains over the top of the tires and tuck them underneath, drive forward to expose the unfitted portion, connect the chains together, then make sure they are in alignment across the tire.
- Once you've had a bit of experience putting on snow chains, you can start installing chains on your front or rear tires simultaneously. This will drastically speed up the process.
The snow chains will shift a bit over the course of driving. To make sure they are tightened enough for safe travel, use the closer link or tightening cam to re-tighten all of the chains after you take a short drive.^{[11]XResearch source}

Part 2

Part 2 of 2:

Removing Snow Chains

Download Article

Take off your chains if the driving conditions improve or you come across a sign indicating that snow chains are no longer needed. Don't keep driving with your chains if they aren’t necessary—it’s hard on the road as well as your tires.
2
Disconnect the rings or chains from the inside of the wheel. You will need to get down on the ground to reach the connections. If it helps, turn the wheel hard towards the inside to get better access to the inside of the wheel.^{[12]XResearch source}
- If the tire is resting on top of the connections, you will need to pull forward a little bit until you can fully access them.^{[13]XResearch source}
- If you attached additional bungee cords during the chain installation, you will need to remove those before you begin removing your snow chains.^{[14]XResearch source}
The chains will be stuck underneath your wheel for now. Laying the chains flat will help ensure that you don’t cause any damage to your tire when you drive over them. Make sure that the chains are not stuck around your vehicle’s wheel or axle.^{[15]XResearch source}
4
Drive your vehicle forward slowly. Pull forward just enough for the tires to clear the chains. Once the chains are fully exposed, carefully slide them away from the vehicle.
- Allow the chains to dry before putting them back in their packaging so they don’t rust.
- Take care not to twist or tangle the chains so that they will be easy to install the next time they are needed.^{[16]XResearch source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Check the chain packaging to see the maximum speed you can drive with your chains installed. In many cases chains should not be driven over 25 miles (40 km) per hour.^{[17]XResearch source}
Thanks
Helpful2 Not Helpful0
Before buying chains, refer to your owner's manual. There are certain rim-tire combinations on some vehicles that are not compatible with tire chains and can cause damage to the vehicle.
Thanks
Helpful6 Not Helpful0
Be sure to give yourself enough time to fit the tires. Wet, snowy, or dark weather conditions can make it take an hour or more to put on snow chains.
Thanks
Helpful3 Not Helpful1

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Ensure you have all hooks pointing outward so you don't damage your tires while driving.
Thanks
Helpful11 Not Helpful3
Be aware of your surroundings while installing the snow chains so as not to hit anyone while moving the car.
Thanks
Helpful4 Not Helpful1
If when you are driving, you hear or feel that the chain may be broken and is hitting your car, stop driving and fix the chain as soon as you can do so safely.
Thanks
Helpful4 Not Helpful1
Never attempt to install snow chains that are too large or too small for your tire because it can be hazardous while driving and may damage your vehicle.^{[18]XResearch source}
Thanks
Helpful1 Not Helpful0