How to Hook Up a VCR to a TV

This How.com.vn teaches you how to connect a VHS player to your TV. While VHS players are considered obsolete technology at this point, you can still hook a VHS player up to most TVs using either a coaxial cable or a set of AV cables. If your VCR doesn't support coaxial cables and your TV doesn't support AV, you can also use an RCA-to-HDMI adapter to connect using AV cables and an HDMI cable.

Method 1

Method 1 of 2:

Using a Coaxial Cable

Download Article

1
Check both your TV and your VHS player for a coaxial port. Coaxial (or "coax") ports resemble round, metal cylinders with a small hole in the middle, though your TV may just have a small circular hole in its back if it's old enough.
- Both your TV and your VHS player must have a coaxial port in order for this method to work.
- If your TV or your VHS player lacks a coax port, you can still use AV cables to connect your VHS player.
2
Make sure that you have a coaxial cable. Coaxial cables have the same connector on both ends—a hollow metal cylinder with a pin in the middle—and they often have a ring around each end that can be used to tighten the cable's connection to the port.
- If you don't have a coaxial cable, you can buy one online or in a tech department store.
Advertisement
This will lower your chances of harming the TV or yourself while connecting the VHS player.
4
Connect one end of the coaxial cable to the VHS player. It should plug directly into the coaxial port in the back of the VHS player.
- You can usually tighten the coaxial cable in order to secure its connection to the VHS player.
- The coaxial port on your VHS will usually have something like "TO TV" written below it.
5
Attach the other end of the coaxial cable to the TV. Again, this should plug directly into the back of the TV.
- Be sure to tighten this connection if possible.
6
Connect your VCR to a power outlet. Plug the VCR's power cable into an electrical socket; both wall sockets and surge protector sockets are fine.
- If your VCR's power cable isn't permanently connected to the VCR, you'll first need to attach the power cable to the VCR's power input.
This may also turn on the VCR; if so, skip the next step.
Press the VCR's "Power" button to do so.
9
Switch the TV to channel 3 or 4. Use the "Channel +" or "Channel -" button on your TV or your TV's remote to change to channel 3 or 4. The channel used can vary from TV to TV; once you see your VCR's blue screen, you should be set.
- For some VCRs, you will need to set the channel on the VCR itself before you can play a tape.
- To play a VHS tape with your VCR, just insert the tape and press "Play" to begin playing it.

Method 2

Method 2 of 2:

Using AV Cables

Download Article

1
Make sure that you have AV cables. AV cables are the red, white, and yellow tri-split cables often used to connect older pieces of technology to TVs.
- The red and white cables are for audio.
- The yellow cable is for video.
- If you don't have AV cables, you can buy them online or in a tech department store—they're quite cheap.
2
Check your TV for AV inputs. You'll usually find the red, white, and yellow ports on the back of the TV, though some older TVs have these ports in the front panel of the TV.
- If you can find red and white inputs but no yellow input, look for a green input with the word "Video" nearby. If your TV has one of these, you can still use AV cables.
- If your TV doesn't have AV inputs, you will need to buy an RCA-to-HDMI (not HDMI-to-RCA) adapter and an HDMI cable.
This will lower your chances of harming the TV or yourself while connecting the VHS player.
4
Attach your AV cables to your VCR. Plug the white cable into the white port on the back of the VCR, plug the red cable into the red port, and plug the yellow cable into the yellow port.
- Some VCRs only support mono audio, meaning that you'll only have a white or a red port at the back of the VCR. Just leave the non-supported cable unplugged.
5
Plug the other ends of the AV cables into the TV. Find a cluster of red, white, and yellow input ports, then attach the cables to their corresponding ports.
- Make sure that all three of the cables are in the same input area, row, or column. Input areas are usually numbered.
- If you're using an RCA-to-HDMI adapter, do the following: Plug the AV cables into the colored ports on the adapter, plug one end of the HDMI cable into the RCA adapter, plug the other end into your TV's HDMI port, and plug the adapter's power cable into a power source (e.g., a wall socket).
6
Connect your VCR to a power outlet. Plug the VCR's power cable into an electrical socket; both wall sockets and surge protector sockets are fine.
- If your VCR's power cable isn't permanently connected to the VCR, you'll first need to attach the power cable to the VCR's power input.
This may also turn on the VCR; if so, skip the next step.
Press the VCR's "Power" button to do so.
9
Switch your TV's input if necessary. If your TV isn't already set to use the AV input, press your TV's "Input" or "Source" button until you arrive at the "AV" setting. You should now be able to use your VCR.
- To play a VHS tape with your VCR, just insert the tape and press "Play" to begin playing it.

Community Q&A

Search

Add New Question

Question
I have a VHS player, but it only has a spot to plug in a yellow and white cord; there's no red. Can I still use this with my newer digital TV, or am I better off trying to use my old analogue TV?
Community Answer
You can use it with your digital TV; the sound just won't be monaural (mono), though.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 13 Helpful 31
Question
Does a VCR require cable, satellite, or an over the air TV signal to view pre-recorded tapes?
Community Answer
No. Pre-recorded tapes play without any type of signal since they already have the media on them (inside the tape itself).
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 13 Helpful 28
Question
I cannot get sound after poking the jacks in. What have I left out?
Community Answer
Try looking at the audio-in ports. You may have placed it in the audio-out port instead.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If How.com.vn has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support How.com.vn
Yes No
Not Helpful 3 Helpful 31

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you use a receiver to handle all of your TV's inputs, you can plug the VCR into the receiver instead of the TV. Most receivers should be able to take both HDMI and AV.
Thanks
Helpful2 Not Helpful3
Some TVs and VCRs support S-Video cables, which are higher-quality alternatives to using the yellow (video) AV cable.
Thanks
Helpful0 Not Helpful1

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Not all TVs will be able to support older VCRs. Check your TV's list of supported hardware online if you have any doubts about purchasing the TV or an old VCR for it.
Thanks
Helpful8 Not Helpful8